Button Placing In Cell
Feb 1, 2014Is it possible to place a control button on a cell?
View 1 Replies
ADVERTISEMENT
Placing Button In Certain Row (VBA)
Oct 22, 2013What is the easiest way to have a button added into a certain cell? Basically I have my workbook enter columns into a certain sheet. When a column is added into that sheet, I want to also add a button, that gives the option to delete the column that it is sitting in. I tried to record macros to figure it out, but I didnt have any luck figuring out logic behind the button placement.
View 7 Replies View RelatedPlacing Button Programmatically On Worksheet
Feb 14, 2014I have an expanding worksheet and would like to move a button so that it is always near the bottom of the worksheet data. When the button is pressed it reworks the worksheet and adds in some additional rows (up to 10 max). I'd like it so that the procedure also moves the button down keeping it in line with approximately the last row of data but not sure how to do this with vba...
View 4 Replies View RelatedPlacing A Calculated Value Into A Cell
Jan 7, 2010if its possible to place a value (the product of a formula) into a cell ie:
Cell A1 = "a"
Cell A2 = "b"
I would like to be able to say: If A1="a" and A2="b", then place "Yes" into D1.
I realize that =if(and(a1="a",a2="b"),"Yes",0)
placed in D1 would give the same result, but I do not want to have a formula in D1, I simply want the characters "Yes" placed in there.
Finding A Cell And Placing It On Another Sheet
Jan 15, 2010I have on sheet 2 in column D names of cities the vary like Sydney Brisbane could be twice but each week the cells could have difference city in them. In column F it will have a number in them a difference number each week . I need the total of the number that matches the city added up on sheet 1 that matches the city in sheet 1 which on sheet one the city never moves.
View 4 Replies View RelatedEXTRACTING The First Four Consecutive Numbers And Placing Them In Another Cell
Aug 18, 2009Column C is the tricky one. It comes from the bank and somewhere in there is a 4-digit tenant reference. I did a formula to try and isloate it and it worked on most but if you look at the very first row, there is a spurious 99 in there, so it didn't work. Is there a way of EXTRACTING the first four consecutive numbers and placing them in another cell?
Reference Cell Based On Button Location & Determine Button Used
Mar 7, 2008I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA.
Sub Process_CheckBox()
Dim cBox As CheckBox
Dim LRow As Integer
Dim LRange As String
LName = Application.Caller
Set cBox = ActiveSheet.CheckBoxes(LName)
' Find row that checkbox resides in
LRow = cBox.TopLeftCell.Row
LRange = "B" & CStr(LRow)
'Change date in column B, if checkbox is checked
If cBox.Value > 0 Then
ActiveSheet.Range(LRange).Value = Date
'Clear date in column B, if checkbox is unchecked
Else
ActiveSheet.Range(LRange).Value = Null
End If
End Sub
Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
Placing Value On Bottom 3 Scores
Mar 3, 2014I am trying to do the following:
901 > 0 pts
851 - 900 gets 1 pts
LOWEST 3 scores gets 2 pts
Example of what i have for the top three
=IF(D8="-",0,IF(RANK(D8,D$8:D$34)<=3,2,IF(D8<79%,0,1)))
I have tried to change it but cant get it to work for the bottom 3 scores.
Identify Every Weekend By Placing 'X'
Jan 8, 2010If I have 1 Jan thru 31 Dec in A1 - A365, is there a way I can identify every weekend by placing 'X' in Col B alongside every occurrence of Saturday and Sunday?
View 2 Replies View RelatedPlacing Textbox Above Y Axis
Jul 23, 2014Is there any way that I can place a text as fixed position over the highest value on the Y axes in a chart with VBA?
View 6 Replies View RelatedPlacing A Chart On A Userform
Oct 18, 2007I was wondering if someone could give me some sample code on how I can get a chart to appear on a userform. What I have is a userform that allows the users to change the inputs that are used in preparing the chart. Then I want a second userform to display the new chart.
I searched the posts and saw reference to saving it as a picture but I am not sure how to go about this. Can I save it as a picture within the excel file? Or does it have to be external. If so, how is this done. And can I do it without interupting what the user is doing on the forms.
Macro - Placing Data In Next Row
Mar 14, 2012I have an excel file which I run every week. I am capturing the data from my last run onto a separate worksheet. I have a total of 5 columns.
Here's an example:
Date RunNumberValidNot ValidPending 3/2/20122723133/9/201224 0024
I want to leave the data already there static and move my formula to the next row when I run my macro. How can I do this?
Placing User Form
Apr 6, 2007I have created a user form (thanks Datsmart), and now need to place the data that will be inserted in that userfom onto my spreadsheet.
The spreadsheet will have 50 rows, each containing a different project. There will be a button on each row to activate the user form for that specific row. They click the button on the spreadsheet, and the user form opens. They enter the data on the user form, and once they click the "add comment" button on the user form, the data should be entered in the last cell of the row on which the button is located.
Now the complicated part:
The users will use that for to update the project from week to week, but each week's comment needs to go in the same cell, but above the previous comment.
IE:
Week 1
Jan 1: Project lauched
Week 2
Jan 6: Project budget submitted
Jan 1: Project lauched
Week 3
Jan 22: Budget approved
Jan 6: Project budget submitted
Jan 1: Project lauched
The date being the date from the user form, and the comment being the comment from the user form. If the latest date can be bolded that would be a bonus.
They each have to go in the same cell cause all relate to the same project. This same thing will be repeated 50 times for each different project.
Assigning Points For Placing
Sep 1, 2007i have a spred sheet that i am trying to give them scores from highest 10 down to 6 then anyone under will get 5
However if there is a tie for first they will each get 10 then the next will only get 8
ex)
a1 b2( this would be there score
3.45 10
3.45 10
3.40 8
3.20 7
2 6
1.99 5
1.89 5
1.5 5
1 5
Automatic Shape Placing
Jun 13, 2008I am trying to have 8 various shapes placed on running pages alphabetically, ie 8 modules to a page being 2wide by 4 high. There would be say 200 entries of various combinations and names equating to 80 pages If these can be sorted alphabeitically by name then placed on subsequent pages. Is this possible in excel or in "VB"
View 9 Replies View RelatedPlacing Into The Correct Name And Category
Jul 16, 2009i've been having for quite some time now. I need to input quantity of items into the existing database that holds all the items names which is sorted by category. Below is a sample of the problem:
Table 1 - Items with quantity that is waiting for input:
Quantity
Product
5
Button A White
7
Ribbon B Blue
8
Thread A Black
10
Cloth A White
3
Button B Blue
4Button C White
9Ribbon A Pink15Button A White
Above is just a part of it, the list goes on to over 200 rows long.
Table 2 - Existing database of all products:
Products
Quantity
Placing A User Form
Apr 11, 2007I have created a user form to enter data into a spreadsheet. The spreadsheet has 6 columns:
Project number - Team Lead - Client, Budget - Comletion date - latest activity. Example:
#2343 - John - Xerox - $230,000 - Aug. 26, 2008 - Jan 1, 2007: Budget has been approved
#2445 - Michel -ABC Inc - $26,000 - July 7, 2007 - Jan 22, 2006: Budget has yet to be completed, awating input from Engineering
etc
The first 5 collumns are stagnant, and will never change throughout the project. The only one that will be updated on a weekly basis will be the "latest activity" collumn.
So in week 2 the above 2 projects would look like this:
#2343 - John - Xerox - $230,000 - Aug. 26, 2008 -
Jan 23, 2007: Materials under study
Jan 1, 2007: Budget has been approved
#2445 - Michel -ABC Inc - $26,000 - July 7, 2007 -
Jan 23, 2007: Budget approved
Jan 22, 2006: Budget has yet to be completed, awating input from Engineering
(however the activity would be on the same row as the rest of the info)
The latest activity (in the example they are dated Jan 23) are what I am looking to control by using the userform. On the user form there are 2 textboxes, 1 for date and the other for the "latest activity:" text. Once the user completes the 2 textboxes on the userform, they click a button, and the new information should be entered in the same cell as the previous activity, but on a different line and above the last activity.
It simply to maintain some sense of order in the activity area of the report. As various users fill in this section, they all do it differently....(each use a different date format, some hit alt-enter to get to the next line within the same cell, some just att to the end, some put in the mnext cell etc) and by the time it gets back to me it is a mess, and I have to spend a day tidiying it up.
Placing A Worksheet In A Specific Position
Oct 6, 2009Part of my code adds a Worksheet to the selected Workbook and then re-orders them alphabetically, but one of the Worksheets (Called home) should always remain at position 1. Is there a way to dictate exactly which postion it should be in so that I can place it there after the sort is complete?
View 7 Replies View RelatedPlacing The Date (1-JAN-2008) In The Right Column For DAY
Nov 8, 2008Placing the date (1-JAN-2008) in the right column for DAY
Now I have a Matrix in which I have the Days as Colum Headings and the Week Numbers as the Rows.
I will be mentioning the Date let's say 1-JAN-2008 in the Cell A1 and I want this date to appear in the approriate Column for the DAY
For Ex:-
The day for the date 1-Jan-08 was a Tuesday, therefore the date should appear in the Column having a Heading Tuesday and in the Column Monday it should show as 31-Dec-07 and the Columns for Wednesday,Thursday,Friday,Saturday and Sunday the Following dates after 1-Jan-08 (i.e. 2-Jan-08, 3-Jan-08, 4-Jan-08, 5-Jan-08, 6-Jan-08).
The appearance of the Date should change as per the day-date combination and as such for the preceding as well as following dates..
Ex:- Lets say for 1-Jan-09 which comes on a Thursday it should display (1-Jan-09) under column Thu and Mon,Tue,Wed should display ( 29-Dec-08,30-Dec-08,31-Dec-08) and Friday,Saturday and Sunday the Following dates after 1-Jan-08 (i.e. 2-Jan-09, 3-Jan-09, 4-Jan-09).
Placing AutoShape Text Into A Variable?
Mar 28, 2013If you know the autoshape number, it is easy to retrieve any caption text but is there a way to retrieve the text from any autoshape without knowing its number.
Dim ASText As String
ActiveSheet.Shapes("AutoShape 43").Select
ASText = Selection.Characters.Text
This will place the text in AutoShape 43 into variable ASText.
I need the code to get the text from any autoshape I click on reguardless of what its number is.
I use a lot of autoshapes on a worksheet as command buttons. Sometimes, the macro code is identical for many buttons with the exception of what the autoshapes text is. This text is the variable the macro needs. It would alow me to use one macro instead of sometimes 30 or more.
Placing Data Into Blank Cells
Jul 6, 2006I know this is basic but I'm having a hard time here. I'm trying to insert certain data into a column of blank cells. I just need the fields to be on there once. As of right now it is pasting the first field multiple times.
Private Sub AA_Click()
If PS = True Then
Range("A61:A70").SpecialCells(xlCellTypeBlanks) = "Pull Stations"
On Error Goto 0
End If
If CS = True Then
Range("A61:A70").SpecialCells(xlCellTypeBlanks) = "C-F-A Switch"
On Error Goto 0
End If
Use Advanced Filter Placing Result In Another Sheet
May 29, 2006Is there any way to use Advanced Filter placing the result (the filtered data) in another sheet ?
I have tried but with no success... An error message is displayed (something like "It's not possible copy filtered data from a sheet to another")...
What do I have to do to get it ???
Excel 2013 :: Placing Date Value To 3 Different Groups
Jul 11, 2014I am rather new to excel and currently using excel 2013.
I have a worksheet with column A ( data group) Column B ( Sent date with MM/DD/YY) , Column C Aged Group {using this formula =IF(B2="","",(TODAY()-B2))} , Column D status ( if the record is open or close).
I would like to create a table that can segregate the data group and how many days it has already aged. And then group them with different aged group. Refer to the attached screenshot.
From:-
Data GroupSent Date AgedStatus
Quotation 06/06/1435Open
Invoice 07/11/140Open
invoice 05/01/1471Open
PO 07/01/1410Open
PO 07/05/146Open
SO 06/30/1411Open
Quotation 05/18/1454Open
SO 05/05/1467Open
Cash Note 07/03/148Close
To:-
Data Group0-15 15-3030 above
Quotation
Invoice
PO
SO
Cash Note
testtest.xlsx
Placing A Small Vertical Line On The Paper
Dec 9, 2008I am currently using a sheet of paper and tallying events. By tallying, I mean placing a small vertical line on the paper, then after 4 vertical lines, I place a diagonal line across the four. At the end of the month, I add all these up. I would like to make a spreadsheet to replace the tallying, but am not sure how to do it. Is this possible? I am beginner to intermediate with Excel and use 2003, but can switch to 2007.
View 3 Replies View RelatedEditing In One Tab And Placing Edited Data In Queue In Another Tab?
Jun 24, 2014I have a simple Excel file composed of three tabs:
-EDIT
-QUEUE
-RESOLVED
On each tab, line 1 has the same headers: Status, Name, Surname, Issue, Details, Last Update
In the EDIT tab, line 2 is dedicated to editing the relevant information under the headers, and once done is validated with a "Done Editing" button: This button would cut line 2, and place it in line 2 of the QUEUE tab, moving down all the others in the list
The QUEUE tab lists all the issues keyed into line 2 of the EDIT tab. An "Edit Selected" button would cut the selected line (or the line in which a cell is selected), and copy it to line 2 of the EDIT tab for further editing, after which it would be placed on top of the queue once again as above.
The RESOLVED tab lists all of the issues marked "Resolved" on the Status column.
What I can't figure out are the macros for the two buttons:
- "Done editing" in EDIT tab adds today's date in the "Last Update" column, then cuts line 2, and pastes it in line 2 of the QUEUE tab pushing down all the lines in the list, and keeping any existing conditional formatting if possible (colours in the "Last Update" column, for ex.). If the status is set to "Resolved" before clicking the button, it does the same, but pastes it to line 2 of the RESOLVED tab instead of QUEUE.
- "Edit selected" in the QUEUE tab just cuts the selected line from the QUEUE tab and pastes it in line 2 of the EDIT tab.
Matching Data From Several Worksheets And Placing In One Worksheet
Feb 24, 2010I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
Sorting A Column, But Placing Results In A Different Worksheet
Jan 2, 2008I have a simple one-column section (column A) of values in Sheet1:
Column-A
Hal
Sonny
Betty
Adam
James
I would like to sort this, but have the sorted results displayed in Column-A of Sheet2.
How can I do this?
Note: I need to be able build flexibility into this such that I can add names to the bottom of the list in Sheet1, knowing that the results in Sheet2 will be able to accomodate the additions.
Placing Permanent Headers - Footers On Documents
May 27, 2006Could someone tell me is there a way to hardcode header or footer info into Excel so that it would appear with every document?
View 7 Replies View RelatedExcel 2010 :: Placing Pictures From Folder In Spreadsheet
Jan 17, 2013We updated excel from 2003 -> 2010 and this stopped working.
We have a macro which takes pictures from a folder and pastes those pictures in the excel -sheet.
At 2003 the pictures were correctly pasted to their positions, but at 2010 the pictures appear in somewhere at the same sheet. (not at the right places, which should be at column "o" at the same row.)
Macro (working correctly at 2003) :
Sub Kuvan_piirto(ic As Integer)
On Error GoTo loppu
SourceFile = Enari
DestinationFile = "Live1.JPG" ' Define target file name.
FileCopy SourceFile, DestinationFile
ActiveSheet.Pictures.Insert("Live1.JPG").Select
[Code] ..........
What should I change for 2010?
Placing Numbers In Sequence Down Rows And Duplicating If Information Matches?
Mar 7, 2013I have 2 columns,
column A has a series of 8 digit numbers (some will match some will not) sorting in A-z order from lowest to highest value.
Column B is blank at the moment.
What I want
In column B i need to add numbers starting at 1 and moving down in sequence.
If more than one rows have the same number in column A they get the same numbe rin Column B
It's really a pain or have to hand type in the numbers and I can't figure out a easy way to do this.
Attached example.
Tab 1 = Origanl Data
Tab 2 = results i'm lookin for.
