Matching Data From Several Worksheets And Placing In One Worksheet
Feb 24, 2010
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
View 4 Replies
ADVERTISEMENT
Feb 24, 2014
I want to find a way to create multiple worksheets and matching data to be placed on appropriate sheets.
Here are more details (Please check the attached sheet screenshot as well):
Excel_Macro_Requirement.jpg
In a workbook, there is a "Master-Sheet". This master sheet contains 8 columns.
I want to create as many new worksheets after master sheet as the values are there in column B (Column 2 i.e. Ad Group). In above attached screenshot, there are 8 values (B2:B9 or A-H). So, I would like to create 8 new worksheets after the master sheet. Also, I want to rename them based on their value from Ad Group column.
Each newly created worksheet should have same columns as the master sheet . Same 8 columns with their name intact.
Finally, I want all matching data of the Ad Group values to be placed on their respective newly created worksheet. For example, worksheet A should have A2:H2 data. Worksheet B should have A3:H3 data, and so on.
Please note that same ad group may have more than one row data. But I don't want to create multiple worksheet of same name ad group. The worksheet should be just one, but all matching data should be placed in that one sheet.
I know it is a bit complex task, but I am sure there would be a way to perform this automatically - probably a macro.
View 1 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Jun 5, 2014
I am trying to compare deductions from two different pay periods. I have the Data from check 1 & check 2 on different worksheets, in no order, and would like the data to auto populate on a third worksheet into a side-by-side comparison of the data. The problem comes when there is a deduction missed or a new deduction that only shows up on one of the two checks. I am having to manually insert lines to make my side-by-side comparison match. Is there a macro or something that can pull the data from these two soures and display them in a side-by-side comparison even if there is no match?
View 1 Replies
View Related
Jul 25, 2007
I have a workbook with 3 sheets. AP, Move, Match. AP & Move will be about 40,000 lines.
I need a macro that will take the data from those two sheets and match them up on the match sheet by column A Line by line with all data moving over. An example is attached.
I'm not sure if this is possible, but please let me know if you need more info because I really don't want to do this manually. Anything that doesn't match I just need a blank line. I can add the true-false formula, but if it would fit in the macro that would be cool to.
View 7 Replies
View Related
May 18, 2006
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies
View Related
Sep 14, 2006
I'm trying to compare 3 different worksheet in the same workbook and copying the unmatched values into a new worksheet. find the attached file. In the sample file, am comparing sheet1, sheet2 and sheet 3 with sheet1 as the base. the columns mite differ in their location but the column headers are same.. The difference, bolded cell, should be copied along with the header and the code, into a new file and has to be saved...
View 2 Replies
View Related
Mar 11, 2008
I have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David
Bill
John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1
David |A, B |Entry2
Bill |A, B, C |Entry1
Bill |A, B, D |Entry2
John |G, H, J |Entry1
Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C
Bill |A, B, C
John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.
View 8 Replies
View Related
Mar 30, 2014
I have a excel workbook, which sheet2 (vehicle arrangement) is master data sheet. which column headings are match with other worksheets. whenever I put the cell value of any multiple rows or column, the cell value (number) and rows (text) are copy or show in the particular sheet which name match with column head.
Sample:
Customer Name
ORDER
MMT
TIL
VBG
JKL
SSL
RDF
ERG
RFG
ERRT
WC
ARS
YUH
TOTAL
M/S XYZ
50
[Code] .......
Worksheets are names as column names is here.. "MMT","TIL", "VBG"........"YUH". So whenever I give the cell value under the column head the same value and corresponding row (customer name) should be show in the particular column head worksheet.
View 9 Replies
View Related
Sep 18, 2006
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
View 3 Replies
View Related
Feb 14, 2014
I have an expanding worksheet and would like to move a button so that it is always near the bottom of the worksheet data. When the button is pressed it reworks the worksheet and adds in some additional rows (up to 10 max). I'd like it so that the procedure also moves the button down keeping it in line with approximately the last row of data but not sure how to do this with vba...
View 4 Replies
View Related
Oct 6, 2009
Part of my code adds a Worksheet to the selected Workbook and then re-orders them alphabetically, but one of the Worksheets (Called home) should always remain at position 1. Is there a way to dictate exactly which postion it should be in so that I can place it there after the sort is complete?
View 7 Replies
View Related
Jan 2, 2008
I have a simple one-column section (column A) of values in Sheet1:
Column-A
Hal
Sonny
Betty
Adam
James
I would like to sort this, but have the sorted results displayed in Column-A of Sheet2.
How can I do this?
Note: I need to be able build flexibility into this such that I can add names to the bottom of the list in Sheet1, knowing that the results in Sheet2 will be able to accomodate the additions.
View 9 Replies
View Related
Jul 15, 2008
I have a "cat_no" file and a "master inventory" file.
I need to do a vlookup to match the catalog #'s and mfr name in the cat_no file and the master inventory file. I also need to pull the pricing and packing string from the master inventory file and add it to the cat_no file where item numbers match.
View 14 Replies
View Related
Aug 19, 2006
see teh attached file, you can see on the file. Worksheet B of B62, I typed 15254", it col name "yarn count" and the product code you can see is Q921 at cell A62. Worksheet A, you can see F2 is Q921, col name is "product code". Now I just plugin a vlaue B62 ='15254' and I want it shows on worksheet A - G2 but remember it must match the product code of worksheetB - cellA62 'Q921' and worksheet A cell F2 'Q92' because next time user will plugin a number ie.1111 on B164; where product code of worksheet B - cell A164 must be match to worksheet A - cell F3, but it should show the value 1111 on cell G3.
View 2 Replies
View Related
Nov 12, 2006
I have 2 worksheets in excel.
1. No. Description Code Req Unit Amount
1 Description 591032 1 pc ?
2 Despription 614804 25 pcs ?
etc.
2. No. Code Description Unit Qty Items Amount
1 591032 Description pc 1 84.30 84.30
2 614804 Description pcs 25 0.89 25.25
etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
View 3 Replies
View Related
Jul 19, 2007
I have two worksheets, in worksheet1 i have a table containing two columns, " names" and "projects". In worksheet2 is where I ask for the name of the project. How do I retrieve all the "names" in worksheet2 that have the same "project" to worksheet1.
I know I made a similar thread in here, but that one was answered quite quickly. Then I learned that my question was written quite wrong and so the answer didn't help me much. I thought about rephrasing the question, but I read that this is a one question on one thread forum.
View 7 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
May 10, 2009
I'm building a spreadsheet for a sporting franchise using a pull-down validation menu. Once the opposing team name is selected from the drop down menu, I would like it to display the opposing teams players and their statistics.
On the database worksheet, I have a web query pulling names and statistics from the web. Each player name has his team name in his corresponding row. What function can I use that will search for that team name and report it back to the display sheet? Once I have the player name there, I think I can figure the statistic portion... But I can't seem to figure out how to pull all of the players with the matching team name into my display sheet.
Example:
A1 on worksheet "A" contains a pull down menu with team names "Lightning", "Storm", "Magic", and "Thunder".
A16-A20 on worksheet "B" contains players from team "Lightning"
A21-A25 on worksheet "B" contains players from team "Storm"
A26-A30 on worksheet "B" contains players from team "Magic"
A31-A35 on worksheet "B" contains players from team "Thunder"
B16-B20 on worksheet "B" contains team name "Lightning"
B21-B25 on worksheet "B" contains team name "Storm"
B26-B30 on worksheet "B" contains team name "Magic"
B31-B35 on worksheet "B" contains team name "Thunder"
If I pull down "Lightning" on A1 (worksheet "A"), I want the following to display:..........................
View 4 Replies
View Related
Dec 30, 2008
hello. i'm new to excel and i'm really hoping for some serious help here. i have the basics down however i'm really stumped at this point. Let me try to explain my worksheet. the worksheet has a sheet for data which is used for drop list values in the new patient template sheet. the new patient template which is just that a blank entry sheet that the user duplicates and adds a new patient to the worksheet to track the visits made by medical staff. there could be over a hundred new patient sheets (each named by the patient) at any given time.
here is what i need help with: my sheet is setup on a monthly basis so each patient has a total of 4 - 5 weeks listed with entries for everytime a nurse visits that patient. what i need to know is how to search the cell entries for the first time a visit occurred and the date it occurred and this needs to be broken down by the 1st of the month - the 15th and then again for the 16th - the end of month for every patient sheet in the workbook. the ranges are not together that i need to search for example f14:f20, i14:i20, f35:f41 and so on for the first 15 days of the month. this all needs to happen like in a macro or somehow automatically.
View 14 Replies
View Related
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Mar 14, 2012
I have an excel file which I run every week. I am capturing the data from my last run onto a separate worksheet. I have a total of 5 columns.
Here's an example:
Date RunNumberValidNot ValidPending 3/2/20122723133/9/201224 0024
I want to leave the data already there static and move my formula to the next row when I run my macro. How can I do this?
View 1 Replies
View Related
Jun 8, 2014
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
View 2 Replies
View Related
Jul 6, 2006
I know this is basic but I'm having a hard time here. I'm trying to insert certain data into a column of blank cells. I just need the fields to be on there once. As of right now it is pasting the first field multiple times.
Private Sub AA_Click()
If PS = True Then
Range("A61:A70").SpecialCells(xlCellTypeBlanks) = "Pull Stations"
On Error Goto 0
End If
If CS = True Then
Range("A61:A70").SpecialCells(xlCellTypeBlanks) = "C-F-A Switch"
On Error Goto 0
End If
View 3 Replies
View Related
Jun 24, 2014
I have a simple Excel file composed of three tabs:
-EDIT
-QUEUE
-RESOLVED
On each tab, line 1 has the same headers: Status, Name, Surname, Issue, Details, Last Update
In the EDIT tab, line 2 is dedicated to editing the relevant information under the headers, and once done is validated with a "Done Editing" button: This button would cut line 2, and place it in line 2 of the QUEUE tab, moving down all the others in the list
The QUEUE tab lists all the issues keyed into line 2 of the EDIT tab. An "Edit Selected" button would cut the selected line (or the line in which a cell is selected), and copy it to line 2 of the EDIT tab for further editing, after which it would be placed on top of the queue once again as above.
The RESOLVED tab lists all of the issues marked "Resolved" on the Status column.
What I can't figure out are the macros for the two buttons:
- "Done editing" in EDIT tab adds today's date in the "Last Update" column, then cuts line 2, and pastes it in line 2 of the QUEUE tab pushing down all the lines in the list, and keeping any existing conditional formatting if possible (colours in the "Last Update" column, for ex.). If the status is set to "Resolved" before clicking the button, it does the same, but pastes it to line 2 of the RESOLVED tab instead of QUEUE.
- "Edit selected" in the QUEUE tab just cuts the selected line from the QUEUE tab and pastes it in line 2 of the EDIT tab.
View 2 Replies
View Related
May 13, 2014
I have 3 different sheets with data that I want to combine into one sheet using a formula. Here is an example:
Sheet A
Date Amount
10/1 $5
10/2 $10
10/7 $5
Sheet B
Date Amount
10/2 $7
10/3 $10
Sheet C
Date Amount
10/5 $5
10/6 $10
I want a fourth sheet that fills with all the data from these three sheets. Ideally it would be in order by date, but I understand that might not be possible. So the last sheet should look like this:
Date Amount
10/1 $5
10/2 $10
10/2 $7
10/3 $10
10/5 $5
10/6 $10
10/7 $5
The reason I want to use a formula of some sort is because if I add more rows to sheet A for example, I want the fourth sheet to automatically add it (whether it's possible to do in date order or not).
View 2 Replies
View Related
Oct 19, 2009
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies
View Related
Oct 5, 2009
I would like to combine the data (in table format) on 900 different worksheets in one workbook (file) below each other, on one worksheet.
The data are in colombs B,C,D,E & F on all of the 900 different worksheets. The number of rows differs on each of the 900 different worksheets.
View 14 Replies
View Related
Jan 28, 2013
How to list all data from different worksheets into one worksheet without manually copying and pasting it in a new worksheet?
For Example: I have 20 worksheets. In those worksheets are list of items that I bought from the different stores. I want to make a list of all items that I bought in one worksheet.
View 2 Replies
View Related
