In the example above, E2 calculates the totals between 12/8 and 12/9 giving me 15:00. What I want the formula to exract is the total from Col D the total from 12/9 to the previous 24hrs.
12/8 has 2 entries, and 12/9 has 3 entries. The total I want to extract in 24 hours, NOT 1 day, is 14. What formula can I use that will calculate the totals in 24 hrs.
Based on above data if The Column heading is 1 then it needs to go to the below data and multiply by that value and at the end should give me the total for the person. note that the total time is captured in a different sheet.
Label 1 = Time when form initialized or opened Label 2 = Running Time (Live Time) Label 3 = Total Time (Label 2 - Label 1)
Now what I need is since Label 2 is live time which shows the running time, Label 3 displays the total time spent. I want to display total time as running time.
e.g. Label 1 = 13:01:00 Label 2 = 13:05:10 (running time/live time) which will keep ticking Label 3 = 00:04:10 (I want even this as running time which keep running when label 2 is running)
I am trying to determine the total hours of downtime accumulated when there are 2 or more machines down during the same time period. To do this, I need to be able to determine if at any point there are 2 or more pieces of equipment down at the same time, and if this is true, how many hours were overlapped. The attached spreadsheet shows how the data is presented.
I am attempting to create a time chart that keep track how long a particular person works on an individual project to finally calculate profit & loss. Attached is the spreadsheet.
I am using invoice #'s to differentiate the jobs but have no clue how to make it calculate how much time was spent per job, per person then calculate the total cost per job per person?
sheets.time chart.xlsx
2014 tab- grey column is installer and white is shop employees profit loss tab- all calculations done here payroll tab- all cost data here
Any way to calculate the total hours staff work based on the mininum time of the first transaction to the maximum time of the transactions. I used a DMIN and DMAX function to get those times per employee. The issue is then the time goes over from one day to the next, such as from 11 PM to 4 AM the next day. As you can see in the data below,the fourth record shows the minimum time as 12 AM and the max as 11 PM with total time worked as 23 hours. In this example, the total hours worked should be five hours.
Need a ormula that will calculate various lengths of time within a column.
For example: I would like to be able to add 02:43 (2 minutes 43 seconds) plus 01:10 (1 minute 10 seconds) plus 05:15 (5 minutes and 15 seconds) ..and accurately arrive at the sum of 09:08 (9 minutes 8 seconds)
Currently, whenever I input the value of 02:43- and assign the value of 'TIME'.. it reads it as 14:23 (clock time..not length of time.) I will only be using data that follows the format of mm:ss (minutes:seconds).
I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.
I have a simple VBS script that puts the username & current time in columns. When the user saves that time is also placed into a column.
I would like to be able to calculate the amount of time a user has spent on the spreadsheet for the current month & if possible the total time all users have spent on the spreadsheet this months.
I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
Is there a easy way to calculate the MAX or MIN of column B dates to column A items that have say many different dates in column B? see attached excel file to show what I am looking for. How to calculate the MIN value in column "B" of the items in column "A" with formula in column "C"...
I am trying to automate a process involving a Grubb's outlier test and calculating averages/stdev of a set of numbers. I have the data in one column and have calculated the average/stdev/%CV of that data. I have also added a formula to calculate Max/Min outliers of that column of data. Then there are cells with IF statements that display either "yes" (for an outlier present), or "no" (if no outlier is present). What I would like to do, if it is feasible, would be to set up formulas to recalculate the average/stdev of the column, taking into consideration either the presence or absence of outliers.
Here is what I invision(cells are for example purposes)
=IF((M9 = yes, Avg(H2:H40)-max(H2:H40)),M9 = no, avg(H2:H40))
So it would calculate the average without the outlier if the outlier "yes" was present, or just calculate the average if "no" is present.
I would also do this with a minimum outlier as well, but i can set that up if this first one is possible.
I have put my values into a XY scatter graph but need to find the maximum point i.e when the gradient is zero. I am using visual basic to obtain my data and draw my graph.
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
I have used max and min function to display minimum and maximum time value; however, it is not displaying the correct time value from the list. I think there is a better formula to achieve this. From the sample data displayed below, minimum time value should be 11:30PM and maximum time value should be 6:30AM
See sample data below:
4/1/2013 11:45 PM 4/1/2013 11:30 PM 4/2/2013 6:30 AM 4/2/2013 6:15 AM 4/2/2013 6:00 AM 4/2/2013 5:45 AM
I need a formula that will calculate the total of the items in column "W" when the row directly below it contains a "1" in column "V". It will need to calculate the totals from that row all the way up to the next row that contains a "1" in column V.
Example:
In X14 (where I will put the formula) it would total W9 through W14. However the formula still needs to be able to calculate the total if there are more or less cells to sum. So that the same formula could calculate that in X8 it will total W5 through W8.
Daily At the end of day We receive sales files from our different teams, these files are received at different times due to difference in working shifts. I have collated last one month data and from this data I want to know the earliest and maximum time and date on which we received the files in last month, so that i can fix the receiving time for all regions.
So I have a workbook that has a range of dates in one column and a corresponding range of times in the column next to it. On a separate sheet I want to return the lowest time&date, and then the maximum time&date. I've tried a few different things but nothing is working.I tried this:
Code: =MIN(B:B+D:D)
This didn't work for some reason. It did return a time, but it wasn't the lowest. The maximum wasn't even close.
Previously I was just doing the min/max of the date in one cell and then the min/max of the time in a different one, but obviously that didn't work since the time wasn't going off of the maximum date, so it was just showing the lowest time period.
I am preparing a daily report available in sheet1 with the actual input in sheet2 generated through a tool.
The report contain three columns i.e. total cases, Total correction done and Not corrected. From the total cases on a specific date, I need to calculate how many correction have been done and how many are pending.
E.g. 01 January 2013=5 cases are uploaded in the tool.
on 02 January 2013, it was observed that 3 cases were corrected and 2 are pending But 9 cases cases are uploaded on the same day in the tool .
So Total correction done (C3)=3 Not corrected(D3)= 11
I have a list that is numbered 1 2 3...ect. I want to have a cell that tells me the total number of entries. I have a I'm not sure how I could do this.
1 2 3 4 5 6
1 2 3
Total = ?
If I do a normal sum it would just give me all of those numbers added up. I want the total to read 9 (in this case) My list changes all the time so I want that total to tell me how many entries I have.
I am creating an employee database. Any simple method for recording then calculating a total of occurrences when someone is tardy. I thought of using an OptionButton but I don't know how it could be applied and stored in my database. This is the code for the form as it exists now:
I can achieve that with the use of SUMPRODUCT. However next month, I will then have to manually change the SUMPRODUCT formula so that it will extract data from the Feb column instead of the Jan column.
Is there a formula which will not require me to change the formula every mth? Ie. I can get my answer simply by changing the criteria?
I've got an excel spreadsheet that is using imported figures from another source. I'm just trying to create a macro that will locate the last cell in Column N, Then will total all the cells above it. I've got the below code to select the last cell in Column N.
myrow = Range("N1:N" & Range("N65536").End(xlUp).Row).Count For i = 2 To myrow Range("N" & i).Select
But I can't figure out how to do the sum part. I've tried to record a macro but to no avail. Since the number of rows will change each day, I need to somehow catch the range. This is part of a bigger project, but if I can get this part working, I think I'll be home free. Attached is a small example.
