Label 1 = Time when form initialized or opened
Label 2 = Running Time (Live Time)
Label 3 = Total Time (Label 2 - Label 1)
Now what I need is since Label 2 is live time which shows the running time, Label 3 displays the total time spent. I want to display total time as running time.
e.g.
Label 1 = 13:01:00
Label 2 = 13:05:10 (running time/live time) which will keep ticking
Label 3 = 00:04:10 (I want even this as running time which keep running when label 2 is running)
Based on above data if The Column heading is 1 then it needs to go to the below data and multiply by that value and at the end should give me the total for the person. note that the total time is captured in a different sheet.
In the example above, E2 calculates the totals between 12/8 and 12/9 giving me 15:00. What I want the formula to exract is the total from Col D the total from 12/9 to the previous 24hrs.
12/8 has 2 entries, and 12/9 has 3 entries. The total I want to extract in 24 hours, NOT 1 day, is 14. What formula can I use that will calculate the totals in 24 hrs.
I am trying to determine the total hours of downtime accumulated when there are 2 or more machines down during the same time period. To do this, I need to be able to determine if at any point there are 2 or more pieces of equipment down at the same time, and if this is true, how many hours were overlapped. The attached spreadsheet shows how the data is presented.
I am attempting to create a time chart that keep track how long a particular person works on an individual project to finally calculate profit & loss. Attached is the spreadsheet.
I am using invoice #'s to differentiate the jobs but have no clue how to make it calculate how much time was spent per job, per person then calculate the total cost per job per person?
sheets.time chart.xlsx
2014 tab- grey column is installer and white is shop employees profit loss tab- all calculations done here payroll tab- all cost data here
Any way to calculate the total hours staff work based on the mininum time of the first transaction to the maximum time of the transactions. I used a DMIN and DMAX function to get those times per employee. The issue is then the time goes over from one day to the next, such as from 11 PM to 4 AM the next day. As you can see in the data below,the fourth record shows the minimum time as 12 AM and the max as 11 PM with total time worked as 23 hours. In this example, the total hours worked should be five hours.
Need a ormula that will calculate various lengths of time within a column.
For example: I would like to be able to add 02:43 (2 minutes 43 seconds) plus 01:10 (1 minute 10 seconds) plus 05:15 (5 minutes and 15 seconds) ..and accurately arrive at the sum of 09:08 (9 minutes 8 seconds)
Currently, whenever I input the value of 02:43- and assign the value of 'TIME'.. it reads it as 14:23 (clock time..not length of time.) I will only be using data that follows the format of mm:ss (minutes:seconds).
I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.
I have a simple VBS script that puts the username & current time in columns. When the user saves that time is also placed into a column.
I would like to be able to calculate the amount of time a user has spent on the spreadsheet for the current month & if possible the total time all users have spent on the spreadsheet this months.
I need to set up an easy to use spread sheet for my office. It needs to be able to calculate the running total spent of fuel, as well as include any discounts we get and then calculate our total savings.So basically, total spent and total saved.
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
I need a formula that will calculate the total of the items in column "W" when the row directly below it contains a "1" in column "V". It will need to calculate the totals from that row all the way up to the next row that contains a "1" in column V.
Example:
In X14 (where I will put the formula) it would total W9 through W14. However the formula still needs to be able to calculate the total if there are more or less cells to sum. So that the same formula could calculate that in X8 it will total W5 through W8.
I am preparing a daily report available in sheet1 with the actual input in sheet2 generated through a tool.
The report contain three columns i.e. total cases, Total correction done and Not corrected. From the total cases on a specific date, I need to calculate how many correction have been done and how many are pending.
E.g. 01 January 2013=5 cases are uploaded in the tool.
on 02 January 2013, it was observed that 3 cases were corrected and 2 are pending But 9 cases cases are uploaded on the same day in the tool .
So Total correction done (C3)=3 Not corrected(D3)= 11
I have a list that is numbered 1 2 3...ect. I want to have a cell that tells me the total number of entries. I have a I'm not sure how I could do this.
1 2 3 4 5 6
1 2 3
Total = ?
If I do a normal sum it would just give me all of those numbers added up. I want the total to read 9 (in this case) My list changes all the time so I want that total to tell me how many entries I have.
I am creating an employee database. Any simple method for recording then calculating a total of occurrences when someone is tardy. I thought of using an OptionButton but I don't know how it could be applied and stored in my database. This is the code for the form as it exists now:
I can achieve that with the use of SUMPRODUCT. However next month, I will then have to manually change the SUMPRODUCT formula so that it will extract data from the Feb column instead of the Jan column.
Is there a formula which will not require me to change the formula every mth? Ie. I can get my answer simply by changing the criteria?
I've got an excel spreadsheet that is using imported figures from another source. I'm just trying to create a macro that will locate the last cell in Column N, Then will total all the cells above it. I've got the below code to select the last cell in Column N.
myrow = Range("N1:N" & Range("N65536").End(xlUp).Row).Count For i = 2 To myrow Range("N" & i).Select
But I can't figure out how to do the sum part. I've tried to record a macro but to no avail. Since the number of rows will change each day, I need to somehow catch the range. This is part of a bigger project, but if I can get this part working, I think I'll be home free. Attached is a small example.
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
Basically, I'm trying to have a cell (eg.A1) where i can input a dollar value and when enter is pressed, on another cell (eg.A2) the dollar value gets added, then the original cell (A1) is cleared for the next input.
Then when I put the next input (A1) I want it to add on to this running dollar total (A2) and yet again A1 is cleared for the next input.
In addition to this I require an additional cell (eg.A3) that when each time a value is added in A1 it counts the times this is done.
I am working on an excelsheet containing a data dump from a manufacturing database. Inside this sheet i want to make subtotals of different production runs. The data that needs to be added up is in one big list between every production run there is an empty cel. So I want to make a formula that does: =SUM(one-cel-above-current:next-empty-cell-above)
In the file I have attached, I need to work out how to give the final total (cell G27) inclusive of VAT, dependent on the value assigned in cells K17-K26, which are explained in the list starting cell B29.
At the moment the value given is net of VAT, and I need the total figure in G27 to recognise that the first item needs to be at 15%, the second at 5% and the 3rd at 0%.
I cut alphabet letters out of MDF. I need to calculate the total weight of any letter. I have a program that will give me the area of any shape. In the picture below I have started with the letter “A”. B7 is the over all area. D7 is the small triangle. G7 is the total area minus the triangle D7. H7 is the thickness and I7 is the total volume.
The weight of my MDF I have set at is 850kg cubic meter. That’s set in A3.
I need the total weight of the letter in J7 to be in grams. The idea is, I put in the areas and set the thickness and it gives me the total weight.
In the attached sheet, I need to find all items in column D that start with "LAB". For those items, Multiply the corresponding values from column B x column E and return the sum of all to cell T1. Once the total is in cell T1, I need to then delete the values in column E for those items (or change them to zero). I dont even know where to start with this.
The code below basically adds addresses to both the page and the oracle backend. However I am trying to work out how to limit the number of addresses they can add to 100. Therefore is it possible via code to calculate If Me.finish.Value minus Me.start.Value is greater than 100 then stop the code?
