When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize()
Me.MultiPage1.Value = 0
TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value
Dim hWndForm As Long
Dim hMenu As Long
hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000
hMenu = GetSystemMenu(hWndForm, 0)
DeleteMenu hMenu, SC_CLOSE, 0&
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long
Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long
Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
I have a userform that creates labels and checkboxes for those lables on the initialize event based on an if statement. I would keep getting an error on a line where I try and use the name of one of those created checkboxes of "variable not defined" as if it hasn't been created, but it was.. Here is the code for the creation:
'Option Explicit Private Sub UserForm_Initialize() 'dynamically add the tickers and funds based on if there is any data inputs for them.
'declaring variables Dim lbl As MSForms.Label Dim i As Integer Dim x As Integer Dim newcheckbox As MSForms.CheckBox
'selects the summary page Sheet1.Select
For i = 7 To 65 If Cells(i, 3) "" Then..................
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
Public Sub Timesht() userform1.Show End Sub And this in my UserForm module:
Private Sub UserForm_Initialize() '//Populate ComboBox1 Sheet1.Range("K5", Sheet1.Range("K65536").End(xlUp)).Name = "CODE" userform1.ComboBox1.RowSource = "DATA BASE!CODE" End Sub I have a named range as "CODE" in my DATA BASE!, sheet1.
I keep getting an error: " 380: Could not set the RowSource property. Invalid property value."
when I type in UserForm1 and arrow down. in turns into lowercase letters.
I have two userform combo boxes, the second follows up on the results of the first.
The second Combo Box looks for incomplete fields and provides them in a drop box. If the data the second Combo Box is looking at (This is different data than the first Combo Box is looking at.) is complete it updates the field, if not then it adds it to the drop down list.
My problem is this, if it finds everything updated and nothing is added to the drop-down list, how do I exit? I just want a complete break where all programming ends.
I am in the Initialize subroutine and I have tried Exit Sub and it still brings up the user form.
The initialization code of a userform I'm using has started causing me 'Runtime Error 13, Type Missmatch' and I can't figure out why. Can anyone see a reason why I may be experiencing this,
Private Sub UserForm_Initialize() 'Get Last Entry Dim countnonblank As Integer, myRange As Range Dim SDate As Date, SDateRange As String, EDate As Date Dim SDateString As String, EDateString As String, DirString As String
'count cells with data in them Set myRange = Sheets("textfilemerger").Range("A:A") countnonblank = Application.WorksheetFunction.CountA(myRange) 'decide if data is present or not If countnonblank = 1 Then.............................
Userform Loading with database turns to close all Excelworkbooks completely
Database created in Excel worksheets to load and show in various different objects on userform. At present this project file size is approximately 2.5 mb and more to go as it is not yet complete. Now you can imagine how much big this project can be.
It uses various different types of objects such as listboxes with many columns, combo-boxes, textbox, checkbox and many. Every objects has its own style to display data on userform which is set in its properties itself.
Before loading userform to display, program creates database from manual entry (which is made by user on their working sheets) to database entry sheets (which is made to make compatible to show on userform). Upon loading, it also loads/populate all datas required in their objects to display.
All works perfect when I am in editing mode. It doesn't matter how big the database can be and works as required. This Project is now Password Protected and distributed among all staffs in our company to work with.
Error Occurs, when I tested in non-editing mode. The moment I triggered the macro to load the program, it takes some few times and pops-up with Excel Recover error message box asking whether to send Error Report and to whether recover & start Excel application again??
I don't know what is wrong. Sometimes it also run successfully when in non-editing mode even there is no changes in program codes.??
Sometimes I feel there can be a virtual memory issue, but my Pc is more than enough with 1GB ram. I hv also increased virtual memory limits and tested but all vain attempt...
I have a user form called frmAddRepresentative. Under the Initialize event I have the following code.
Private Sub UserForm_Initialize()
'This procedure runs when the frmAddRepresentative form 'is initialized. The procedure sets the repInformation 'sheet as the look sheet sends the focus to the combo box 'used to enter the name and updates the combo list
Set WS = calcRepInformation
I am getting the following error: Could not set the List property. Type mismatch. I have the exact same code on other sheets and it works fine.
I have a userform that has a multi page on it with 4 pages. I notice that there is no way to have the individual pages be set to a click event- or none that I see anyways. What I am wanting is for a series of events to happen based on what page the user chooses from the four (like a userform initialize type event).
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I am finishing a travel per diem form and I want to implement a user form where the current rates could be entered by the user and update specific cells used as my drop down list values. I have made the form and a box that activates it. I just can't write the code to place the inputted data from the form into specific cells on a sheet so the list boxes will have the current rates to choose from. I can only find information to have the data populate the next blank row of a table.
I have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Private Sub theCal_AfterUpdate() Select Case ActiveUF Case "AddForm" application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value Case "EditForm" '.... etc end select end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
Is it possible to build a simple input dialog box with only code? I'd really like to avoid having a userform permanently in the project.
Ideally it would either display and be dismissed with code only, or be constructed as a real userform, displayed and dismissed, then deleted from the project afterwards.
I am aware of excel's built-in input dialog box, but I'd really like to get away from it's awkward keyboard functionality if it's somehow possible to do. Although that would be ideal if there were some way to make the textbox's behavior to the Home, End, Tab and arrow keys more like that of a normal textbox, but I am unaware of any such options.
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
Trying to write a UDF Code for a User Form. The User puts in the data for the element it is trying to find the pressure in mm Hg for.
I want a Msg Box to appear when the desired temperature is less than the lower limit temp. and the desired temp is greater than the upper limit temp.
I figured out how to get the message box to appear, but I have not figured how to get the If statement to continue with the calculation if the desired temp is within range. When I press the command button to calculate, the message box appears whether the temp is in range or not.
My code is as follows:
Private Sub CommandButton1_Click() Dim A As Double Dim B As Double Dim C As Double Dim Pvapor As Double
way to allow a user to add a control to a userform without going into the VBE. Here is the situation, I am developing a userform to calculate a projected budget. I want the user to be able to select the number of controls to add, and click a command button to add them. Based on other selections that the user makes, different controls would automatically be added. Is this possible? As a follow up, will I be able to atttach code to these new controls?
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form 2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden) 3: user then does work on 2nd workbook, 4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code: Unload Me ActiveWorkbook.save Windows("ABC.xlsm").Activate Sheets("Request Sheet").Activate Call Sheets("Request Sheet").ForceClickOnBouttonXYZ Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!! Windows("xyz.xlsm").Close ABC is the 1st workbook xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code: Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode = vbFormControlMenu Then Application.ScreenUpdating = True Unload Me RestrictedOptions.Show Else Cancel = True End If End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
I have a worksheet (named Deduction Worksheet) that is a running record of all part removals. A removal is denoted by a row entry that contains removal particulars. The first column (Column A) in each row contains a unique number for each part. Column K shows how many part units were removed in that removal:
Column A ... Columns ... B to J ... Column K Unq001 various
In the code above 'crng' is the criteria range, 'sValue' the criteria and 'srng' the sum range (which follows the normal SUMIF function within a worksheet). Both the 'crng" and 'sValue' values contain text, / and numbers.
note that other elements on the userform code look at data on other worksheets (not sure if this will effect this).
I have a time sheet which is used by around 15 people. Part of the timesheet is a userform which adds a new sheet and names it with the seleted month and year. I have made a few changes to my timesheet which I wish to update on other peoples sheets. I am going to send out a speadsheet with a macro that people can run and it will automatically make the changes to their timesheet. I have done all the work for updating the various formats and formuals but I have hit a bit of a brick wall when trying to change the code on a user form via a macro. It would be great if I could either overwrite all of it or add a some lines of code from a specific line number.
I have just discovered the exciting world of the additional controls that can be added to userforms. provide me with some sample code to make a progress bar increment and to activate a windows media avi file from a user form. I only need to know the code (I know how to add the controls etc)
Is it possible to scroll down in a UserForm Frame with a VBA Code in excel. My frame in the userform has a scroll height of 600 and a lot of option buttons. Based on a selection in a ComboBox(using If statement), I'd like to scroll down to a certain amount in the Frame.
I have a VBA function that shows a user form. In the form, the user has to select a value from a combo box. Once they do that and click the submit button, I want to return to the next line in the function. So far I've been unable to accomplish this
I have a userform with multiple text boxes and combo boxes. Firstly, the Tab Key Behavior setting for all of these boxes is set to false, and so is the Multiline setting, which should make the tab key always move focus to the next object in the Tab Order, but sometimes the tab key will ignore these settings and enter a tab in a text box instead of moving the focus to the next text box.
secondly, I have some code which should run for key presses in these text boxes to only let you enter certain characters in them. Whenever the tab key problem above occurs, this code seems to stop working and lets you enter any character you want.
I have a multipage userform with about 7 pages. When page 5 is activated, it caused excel to completely lock up. This does not happen everytime but randomly, and I can't seem to figure out what is causing this.
Here is the code - If Me.MultiPage1.Value = 5 Then Call LaborCosts End If
If Not Range("A46").Text = "" Then frmpricingtemplate.Label29.Visible = True frmpricingtemplate.TextBox46.Visible = True frmpricingtemplate.Label29.Caption = Range("A46").Text Else
I'm making a form in excel to retrieve a number of welds. This number needs to be passed on to the next form to dynamically create an identical number of input fields (a set of text boxes and labels essentially). Any ideas on how I might do this? Is it even possible? I would like to avoid having 100 (my assumed maximum, it could get changed) sets of input fields and hiding the unused ones,