Can Split Currency Into Two Separate Columns Showing Pounds And Pence?
Dec 1, 2012
I have a mileage expenses form from work that I am trying to fill in using Excel, instead of filling it in by hand.
Column R shows the miles travelled.
Column S shows the Rate per Mile.
Column T (should) show the pounds.
Column U (should) show the pence.
Searching has led to T11, for example, using the formula below to show the pound value.
Code:
=INT(R11*(S11/100))
However, I am having less luck on finding a way to display the pence amount in U11.
Ideally, I would like the cells in column U to show the pence without a leading zero or decimal point and just the pence value only.
View 7 Replies
ADVERTISEMENT
Aug 12, 2014
In A1 I show the following content: 5,12,27,36,124
How can I make this split to show the following layout:
A1: 5,12,27,36,124 B1:5 C1:12 D1:27 E1:36 F1:124
My worksheet has thousands of lines so hoping for a quick and easy formula that I can pull down and copy for the entire sheet?
View 7 Replies
View Related
Aug 20, 2014
After I imported this data, the date and time is in the same column in the format of "mm/dd/yyyy hh:mm:ss" military time. How do I write a VBA code to split up the date and time into two separate columns. One column would only have "mm/dd/yyyy" while the other only have "hh:mm:ss" in military time.
Eventually, I need to extract information from the data by looking for a specific time. I would also plot time vs something.
I don't know if treating it as a string would work, because it would just become a text rather than a time, right?
View 10 Replies
View Related
Apr 26, 2007
I have a spreadsheet with a few thousand rows, yeah i know..lol Each one of the rows has contact details for individuals. I have the address for each person in one field with up to four different sections, seperated by tabs. How do I go about seperating each part of the address so it is in a different column? I have tried text to columns, and it only seperates the first portion of the address, seperated by the delimiter 'tab'.
View 9 Replies
View Related
May 22, 2014
I need to split the data into worksheets (see attached) by the Advertiser column and then by the deal year and deal code columns. I need each worksheet to be named per advertiser and deal year_deal code. I took off and replaced the data since it is sensitive information.
creating a macro or implicating one into the workbook to run for future reporting.
View 13 Replies
View Related
Mar 13, 2009
I would like to "reverse concatenate" an address text string as follows: ....
View 9 Replies
View Related
Jun 20, 2014
Im trying to come up with an automated way of splitting concatenated information but putting each concatenated value in a seperate row.( i have columns of data that need to stay with each concatenated value) Eg
Concatenated comma delimited data
Cust Name Cust Identifier Locations
L Kim 543545 California,Chicago,Florida
S David 31434 Maryland,Vermont,Maine
D Bryant 572575 Texas,Oaklahoma,Nebraska
i need to to get a result that looks like the below example im currently just doing text to column filterting and copying all the columns over and stacking them on top of each other. i need to find a way to automate this process but i cant seem to think of one
Customer name Customer Identifier Location
L Kim 543545 California
L Kim 543545 Chicago
L Kim 543545 Florida
S David 31434 Maryland
S David 31434 Vermont
S David 31434 Maine
D Bryant 572575 Texas
D Bryant 572575 Oaklahoma
D Bryant 572575 Nebraska
View 2 Replies
View Related
Apr 8, 2014
I have the cell data as below
How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?
I still want the original data as I need to check that the splits worked well?
16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5
View 2 Replies
View Related
Feb 27, 2010
I have a file contains thousands of rows of purchasing order. the purchasing value is in different local currency,the data(number) format is "Accounting" .
Is there a way to separate the currency sign and the number into different column?
I need to the currency sign to be able to convert data to desired currency. But Excel read the data as number. so I was doing it row by row. Such a pain and not efficient.
View 9 Replies
View Related
Dec 30, 2013
I have a spread sheet which totals the amounts in 2 columns D and E, which are pounds and pence. The formulas for each one are:
Pounds
=SUM(D3:D8)+ROUNDDOWN((SUM(E3:E8)/100),0)
Pence
=MOD(SUM(E3:E8),100)
These work very well and give me the correct figures.
What I would like to do is to add up the values of each row based on the criteria of column C and have just one value in ONE cell (as shown on lines 13 & 14), so for instance:
When added together the values of rows 3,4 & 6 are 7.25 (based on a value of "W")When added together the values of rows 7 & 8 are 5.00 (based on a value of "F")
I have tried to show this as an example in the image below:
A
B
C
D
E
[Code]....
I'm using Excel 2010 on Win 7 Pro.
View 3 Replies
View Related
Jun 22, 2013
I have a list of user names and UIDs, all in one column. I'd like to split the numbers into a separate column. How can I do this? Here's an example:
A'Aross Hd 798027047
A'Yolanda Gallegos 100004367799914
Aaiky Sweet 100000984883871
Aarchie Alin 100000295447271
Aasusana Azanza 100000086329219
Ab Raf 100000223369007
Abigail Cadenas 100003769100097
Abigail Gopaul 100002988007633
Abod Rezk 100002010187332
Btw, I'm an Excel newb and don't know a lot. I did try Data/Text to Columns with a delimiter of spaces, but there's really no rhythm with the spaces so it splits it all whacky.
View 9 Replies
View Related
Sep 26, 2013
I would like to separate data into multiple workbooks based on a unique value in the column. For instance if I have Departments in Column F, that has data of accounting, HR, etc. I would like to put all accounting data into a accounting workbook and all HR data in a HR workbook.
View 4 Replies
View Related
Sep 25, 2008
every month I import (from SAP) Local Authority staffing data for 200 schools into an Excel template. After a bit of tweaking I end up with a single spreadsheet showing formatted and adjusted data for all schools, with relevant headings separated by page breaks.
This is fine if for distributing a hard copy to schools, but I want to email it. I've seen macros that would allow data to be split onto separate tabs, but is there a way to break it down into 200 separate spreadsheets? I confess to not knowing any VBA, so be gentle with me
View 9 Replies
View Related
Jul 7, 2009
I have a large workbook with many worksheets which are all grouped into pairs - i.e. Sheet1 & Sheet2 go together, Sheet3 & Sheet4 go together; Sheet5 & Sheet6 go together, etc. etc.
I need a macro to divide this workbook into separate workbooks where each group of worksheets has a separate file of its own and I want to name the new workbooks after the second sheet in each group:
i.e. A new workbook for Sheet1 & Sheet2 called Sheet2.xls; a new workbook for Sheet3 & Sheet4 called Sheet4.xls; a new workbook for Sheet5 & Sheet6 called Sheet6.xls; etc. etc. etc.
View 12 Replies
View Related
Oct 30, 2010
I have a macro below which splits the data in my workbook (Attached) into seperate workbooks on the basis of each change in data, and saves the new workbooks with the value available in column A. Everything else works perfectly with this code I just want the code to take the workbook name from Column B, not Column A as it is currently taking.
Sub Test()
Dim Sh As Worksheet
Dim Rng As Range
Dim c As Range
Dim List As New Collection
Dim Item As Variant
[Code] ......
View 9 Replies
View Related
Aug 7, 2012
Is there a way to separate the suffix from various addresses i.e
A1= FOSTER AVE
A2=WISE
A3=EL DORADO ST
A4=OLD HIGHWAY 221
Some of the addresses are up to 5 words and numbers, some are missing the suffix all together.
View 6 Replies
View Related
Aug 28, 2009
The following code takes a large range of data (currently 20K+ rows) and breaks it out into separate worksheets. This takes a while, and I have been trying to insert a progress bar into this macro, but the progress bar goes in reverse (from 100 to 0) but the userform will not unload at the end.
Sub MoveCells()
Dim objBook As Workbook
Dim objSheet As Worksheet
Dim lngRowSpace As Long
Dim strName As String
Dim lngTimeRow As Long
Dim lngStartRow As Long
Dim lngInteration As Long
Dim strDataSheet As String
Dim boolError As Boolean
Dim counter As Integer
Dim PctDone As Single
View 9 Replies
View Related
Jun 3, 2008
How do I split data in one cell into three cells?
example:
From
(A1)100 CARIBBEAN VILLAGE DR
To
(B1)100
(C1)CARIBBEAN VILLAGE
(D1)DR
Not all the data is the same, some have more words than others.
View 4 Replies
View Related
Sep 1, 2013
My spreadsheet has a column formatted as 'currency' (because it's a column of prices).
I need to have accurate values in the fields, including pence, eg. '£24.32'.
However the vast majority are round numbers with no pence eg. '£34.00'
So I am looking for a way to not display the pence when their are none, eg. '£34' rather than '£34.00', but I don't want to round to the nearest pound.
View 2 Replies
View Related
Apr 11, 2012
I am looking to split data in a worksheet into separate sheets based on Column C which contains Either Babycare or Homecare or Industrial or Professional. Eventually there maybe more names. If possible I would also like to name each sheet.
My VBA skills is limited to this particular task.
View 2 Replies
View Related
Jul 15, 2014
splitting out date/time strings to separate cells, but I cannot find how to split the following.
I have the serviceable date of an aircraft delivery set as 'S hh:mm dd-mmm-yy', which is due to being used by an external application in this format. This is entered by the user and I need to be able to extract the date time strings and switch them to dd-mmm-yy hh:mm, excluding the S from the result as a formula in another cell.
I keep getting a #value error or returning the whole string result.
View 3 Replies
View Related
Nov 20, 2012
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
View 5 Replies
View Related
Oct 9, 2013
How can I separate the following numeric/text combination into two (2) separate columns in Excel?
302ALTO
406AMZN
451AMRC
404AMAD
605ANCC
405ADRC
The result would be:
302 ALTO
406 AMZN
451 AMRC
404 AMAD
605 ANCC
405 ADRC
View 6 Replies
View Related
Jun 13, 2013
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
View 3 Replies
View Related
Jan 10, 2014
I need to write a macro to split an excel file into separate workbooks and automatically email our project managers.
View 1 Replies
View Related
Mar 11, 2012
How to make EXCEL 2007 Automatically convert all my CURRENCY symbols in all cells formatted for CURRENCY in THE SAME SHEET to the one and ONLY currency selected in JUST ONE cell ? (i mean, after conversion, all of them are Not just display currency symbols, but Calculable monetary values like regular Excel's built-in currency format)
I am a dummy in VBA so I really am not familiar at all if the solution is really one of VBA. I don't even know how to start programming VBA at all in Excel.
View 3 Replies
View Related
Apr 23, 2009
I have several rows which lists different currencies - USD, GBP, EURO, JPY etc.,
A1 usd 5000
A2 GBP 7000
A3 USD 3400
A4 EUR 12000
A5 JPY 89000
A6 EUR 1000
At the bottom I want to show the total of each currency separtely.
View 13 Replies
View Related
Jan 5, 2010
I've got some time values in an Excel Sheet in the format hh:mm:ss. I need to split them into columns (including the colon) like below:
hh: | mm: | ss
I can do this manually using text to columns but when I use text to columns in my macro, it automatically changes the time format to h:mm:ss PM
View 2 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Feb 20, 2009
I have four columns of data, as follows:
label 1, value 1, label 2, value 2
I need to create a formula in the fith column that for each line will tell excel to:
look for entry in 'label 1' in 'label 2' if there is a match, then subtract value 1 from value 2, display result.
I have tried doing this with SUMIF but am getting nowhere fast....
View 7 Replies
View Related