I wonder how to capture de event when one choose to delete a sheet. Similar to vbyes or vbno?? Now it inmediatley goes to my sheet_deactivate_event, but then I don't know if it is beiing deleted? I mean capture if you do righclick sheettab
View 2 Replies
I am trying to capture the value of a cell before a change even. The attached Macro will report the value before the change but does not store it so that I can use it in another module. What I am trying to do is capture the value before the change and then look that value up in another worksheet (in the same workbook) so I can make the same change in the second workbook.
The values will always be in Column B and will always be string characters.
The code I am using for the change event is as follows: ....
Is there a way of capturing the print event to run some code?
I.e. The 'Print' button is clicked and then code executed in the sheet.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI have a spreadsheet that has two tabs that show different views of my report. In tab "Team View" I'd like to capture the information that is in "Cost Centre View" in the fields Nov09 to Oct10.
I want my formula in "Team View" tab to take the TOTAL "Run Rate Reduction" value in "Cost Centre View" ONLY and have the same "Initiative Type" in "Cost Centre View" that align to what is shown in "Team View" in column A (i.e. ISO).
I tried using a SUMPRODUCT but my formula didn't work.
Is there another formula that will give me this calculation?
There is 2 parts to my question and I will explain them as best as i can.
1. I have a front sheet and 12 other sheets ( 1 for each month of the year) they all have the same layout. On my front sheet I want to create a button which will capture the sheet onto my front sheet for the current month, whether this means to make 12 buttons to choose which month is displayed on the front sheet or one that detects the date by system time i dont mind.
2. These 12 sheets will ideally be hidden and what I am wanting is again, on the front sheet 12 buttons for each sheet to bring up the corresponding hidden sheet so they can be viewed, and then on each of the 12 sheets another button which will hide them and return the user to the front sheet.
I am using the following save as function on a template to save it as a workbook:
Sub SaveFileAsDate()
Dim WSName As String, CName As String, Directory As String, savename As String
WSName = "TMG Work Order"
CName = "C4"
Directory = "Maintenance Service Agreements"
savename = Sheets(WSName). Range(CName).Text & Sheets(WSName).Range("F3").Text & Sheets(WSName).Range("K4").Text & Sheets(WSName).Range("K8").Text
If Directory = "" Then Directory = CurDir & ""
On Error Goto errorsub:
ActiveWorkbook.SaveAs Filename:=Directory & savename & ".xls"
Exit Sub
errorsub:
Beep
MsgBox " Changes not saved!", vbExclamation, Title:=savename & ".xls"
End Sub
It works fine but I need to be able to capture future changes to the sheet as the same saved name but to add and extention like (-Rev1). Once it has been saved as -Rev1, each additional time it saves, the -Rev number would increase. I searched the forums but didn't find an exact match.
I'm using the following code. Basically it formats some cells in row based on the value in the first column of the row.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
Dim RowNr As Integer
If Not Intersect(Target, Range("A1:A65536")) Is Nothing Then
For Each cell In Target
If Target.Text = "" Then
icolor = 0
ElseIf Target.Text = "Row Loaded" Then
icolor = 4
ElseIf Left(Target.Text, 14) = "Row not loaded" Then
This works fine, except when I delete a row by clicking on the row number to highlight the row, and then right click to select delete.
The event fires for each cell in the rows, and takes ages to run.
Does anyone have any ideas on how to prevent this from happening? I tried substituting
For Each row In Target
when I press Delete a value within a Target Range in a sheet, the sheet event is trigered.
how can I press Delete a value within the Target Range without the event being trigered ?
I'm working on a time sheet, and to make it easier to enter time i created a macro that sets the auto correct to correct a "." to a ":", but when the workbook closes i want to run a macro that deletes the auto correct rule.
If possible, I'd like to be able to catch & handle the event of a User deleting a row (or potentially a column) from a specific Worksheet so I can then implement some automated "housekeeping processing" on other existing rows / columns.
I'm using XL 2010 so from what I've found so far it looks like I should possibly be using the Worksheet_Change() function, but beyond that I'm currently stuck.
I have a macro which makes an renames a new sheet for me using a button, how can I copy macros currently found in only one sheet to this new sheet? Mainly used in formating and formula display.
View 5 Replies View RelatedI need to declare an event that happens when a worksheet is renamed
the code that would trigger the event is
I have a worksheet called "Roster" with a list of names from D7:D17 each person on the list has a separate sheet that is called by their name. the sheets are not linked up. the names were just manually typed into the list and into each sheet name.
If any name is changed on the list on "Roster!D7:D17" i would like the sheet that has that name to change as well.
This is the code that i was sent, but i do not know enough about VBA code to understand exactly what is happening, thus i cannot diagnose the problem. I placed the following code into the page "Roster" (by right-clicking and then pasting the code) then i closed, but nothing happens. I can mess with the code and get an error message. but that is about it. error messages usually say something about the debugger, or runtime error or something.
there is the
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
OldVal(0) = OldVal(1)
OldVal(1) = Target(1).Value
End Sub
how to automate my excel sheet i have got.
It has code which when you click the "Save" button it saves the document and then converts a copy as CSV with the same name.
I have been trying to automate this to run every 2 minutes but everything i have tried does not work.
I have tried using OnTime events but again does not work.
I have a Combo Box on a Work Sheet that the user selects a subject from. When the Combo Box content changes I need it to run a macro. Ive tried putting this in the WorkSheet file for the sheet
View 3 Replies View RelatedI'm making a macro to show or hide rows depending on whether or not a checkbox is checked. I'm using Wingdings font checkboxes, not actual form controls. The question: My macro can't find the last row of the used range on the sheet. This is in the sheet's code, set to fire when the selection changes.
Normally the line in blue works just fine, but it's not working here. In the attached workbook, the macro thinks the last used row is row 19, when it's actually row 21. What's going on?
One of the things it does throughout the course of the run is unprotect the worksheet, do what it needs to and then reprotects the sheet (using a password). On the second run, the sheet protection input box is shown and I am required to input the password before the code will execute.
The code that I have written uses an Add-in that pulls data from a database. As part of that retrieval, the other add-in protects the sheet without a password. Would that be causing my error?
why this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub
I have many worksheets in a workbook that need to be saved if a user changesanything on them.
These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sht As Object
For Each sht In ThisWorkbook.Sheets
If LCase(Right(ws.Name, 2)) = "sd" Then
MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save
End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
I have the following code what it does, is when a user changes a cell it copies the row to another sheet along with the userstatus. Problem is if the user pastes more than one column of data into the sheet it copies the row more than once depending on the amount of columns the user pasted . I only want to copy the row once.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim SelRng As Range
If Not Intersect(Target, Range("A3:K30")) Is Nothing Then
Set SelRng = Target
Application. ScreenUpdating = False
For Each cell In SelRng
Range(Range("A" & (cell.Row)), Cells(cell.Row, Columns.Count).End(xlToLeft).Offset(0, -5)).Copy
Sheets("Tracking").Select
ActiveSheet.Cells(Rows.Count, 31).End(xlUp).Offset(1, -13).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ActiveCell.Offset(0, 13).Value = ActiveWorkbook.UserStatus
Sheets("Engine 1").Select
Next cell
Application.CutCopyMode = False
Application.ScreenUpdating = True
End If
End Sub
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value
If UserInput > 1 Then
NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2)
Application.EnableEvents = False
Target = NewInput
Application.EnableEvents = True
End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
Can this error be avoided..?
I have found that this only works on the sheet being viewed, how can I make it work on a different sheet than the one that I am on?
Option Explicit
Private Sub Worksheet_Calculate()
If Range("C1").Value = "5" Then
ActiveSheet.Shapes("rectangle 1").Visible = True
Else
ActiveSheet.Shapes("rectangle 1").Visible = False
End If
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Is there a way to have a macro run every time a sheet in a workbook is accessed? Something similar to the workbook open event, but for worksheets.
View 2 Replies View RelatedEssentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
I am trying to write a macro where it will delete rows in Sheet A if any condition is found in the row which is based of conditions in Sheet B.
Sheet A :
Column A Column B Column C Column D
1234 ABC tyu 4588
asd qwe www 4455
zxc zdaa 1234 4441
ghj llll 1111 poo0
Sheet B (where i kept my conditions in Column A: )
Column A
1234
1111
(and many more....)
the end results will be the Row 1 and row 4 will be deleted. I have tried to google but most only contains deleting rows with a specific conditions.
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies View Relatedi want to delete any sheet after sheet called "Summary"
View 1 Replies View Related
