Increment Through Checkbox To Check Status And Change A Value?
May 1, 2014
I have a userform that has 28 checkbox's that we go through that we check which ones apply to a report.. To keep those boxes checked as the supervisor's cycle through the reports, I am leaving a 28 digit code next to the report which is created as they check/uncheck the proper checkbox's.
[Code].....
So if say CheckBox10.value = True, then the 10th digit of the ID will change to 1 while keeping the rest of the ID the same.
View 6 Replies
ADVERTISEMENT
Oct 17, 2011
I currently have a user form and am trying to make a counter to that will increment if the check box is not selected, but will not increment if the check box is selected.
I am assuming I could use an if then statement for this, under the command_click OK. but I cant get it to work.
View 9 Replies
View Related
Sep 9, 2007
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
View 9 Replies
View Related
May 31, 2014
I have a survey template with several options buttons (made from Form toolbar and grouped by Group Box).I would like to have a check box that would activate these option buttons for specific question if unchecked and vice versa.
I have copy & paste below formula in VB, but is shows 'Run time error 424' & when I Debug it shows 2nd line highlighted by yellow colour.
VB:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then [code]....
View 3 Replies
View Related
Dec 23, 2011
I check on the status of Purchase orders all day long and have to send out email to different vendors asking if they received it.
I would like to create a VBA code that will open up a new email and have a general question inserted in the email (question below). I can fill in the PO number and email address on my own.
Please confirm that you received the following PO and verify the Qty, price and delivery date.
View 5 Replies
View Related
Jan 7, 2010
I'm trying to check the value of a checkbox that I created in my workbook, but both of the if statements below say "Object does not support this property or method"
View 6 Replies
View Related
Apr 7, 2014
I have a company and I try to keep a record of all my clients in Excel. Below, you can find a simplified example:
2014-04-07_105615.jpg
Now, I have so many clients that my Excel file is quite large. So when I want to change the status of a contract, I have to manually look up the file number and change the status manually.
What I ideally would like, is a form that says:
Change status to paid: xxxxxxxx
Where the x's are, I would have to enter the file number, press enter and the corresponding status should change to "paid". I have about 30 contracts a day that change status.
I tried to "draw" what I mean:
2014-04-07_110609.jpg
Is this possible in Excel? And how is it done then?
View 1 Replies
View Related
May 14, 2014
I have a userform1 with textbox1, checkbox1, checkbox2, checkbox3 and checkbox4. What i want to accomplish is
[Code]....
View 3 Replies
View Related
Aug 22, 2008
I am trying to write a macro for an option button, that when selected it checks to see if another option button is selected then continues to automatically change the value of 5 other option button within in 5 other group boxes
Sub SetFilter()
'check to see if filtering is required
If Sheet1.Shapes("Option Button 54").value = True Then
'set non-specific filtering
Sheet1.Shapes("Option Button 28").Value = xlOn
Sheet1.Shapes("Option Button 38").Value = xlOn
Sheet1.Shapes("Option Button 44").Value = xlOn
Sheet1.Shapes("Option Button 52").Value = xlOn
End If
End Sub
View 2 Replies
View Related
Nov 14, 2006
I have a spreadsheet that I use for people to make requests.
They can only select from the dropdown menus or the check boxes in the spreadsheet. Some fields are required.
I have a button that they click on to save the workbook.
When they click on it a macro checks if all required fields are completed. If they aren't, The user receives a Message box asking them to complete all required fields.
The problem I'm having is with 5 checkboxes each linked to a cell (B11:B15).
The user can check any or all of the boxes but they need to select at least one.
how I can check if the user selected at least one and if not then I would display a Message box asking them to select at least one?
Here is my code ...
View 4 Replies
View Related
Dec 14, 2007
I have a problem to check the value of a checkbox when I write the code in Module1. I have several worksheets, and in each worksheet there is a CheckBox1. I want the macro (in Module1) to perform a given code when the CheckBox1.value = true and visa versa.
The code I'm using is as follows:
Option Explicit
Global ws As Worksheet
Application. ScreenUpdating = False
For Each ws In Worksheets
If CheckBox1.Value = True Then
'Do code1
Else
'Do code2
End If
Next ws
Application.ScreenUpdating = True
End Sub
When the Macro is run, an error msg is showing "RunTime error '91'.
Does anyone know how to make this macro function? I've searched the forum, but couldn't make any of the codes suggested to work.
View 3 Replies
View Related
Mar 18, 2009
I received a spreadsheet form containing some checkboxes that I need to tick. The problem is I dont know how can I tick/show the check mark on the checkbox. everytime I double click it, macro vb screen appears.
View 4 Replies
View Related
May 18, 2009
It might be very simple, but all I need is if I have data on A1, and i have 3 check boxes labeled: NEW, EXISTING, and ARCHIVED. I want it to automatically check the corresponding boxes. So if "NEW" is typed under A1, it'll check "NEW" box. "EXISTING" will check "EXISTING" check box and so on.
View 4 Replies
View Related
Oct 1, 2006
How do i check a checkbox on an excel worksheet?
View 5 Replies
View Related
Jan 6, 2008
I have created a checkbox which places a "TT" on a master sheet when checked on the NEW8 sheet. What I want to know is how do I get the "TT" to delete from the master sheet when unchecked on the NEW8 sheet. Below is what I have...
View 9 Replies
View Related
May 12, 2014
I have some vba code that currently copies a status table out of a worksheet, into a temp file for an email. The status table in excel has a column D which can have different status. I want to select everything in the table except rows that are 'Descoped'. Currently my code looks like:
Set rng2 = Sheets("Execution Status").Range("B2:F420")
This picks up everything without looking at the status. I want to change it so it doesn't pick up the rows where Column D contains 'Descoped'.
In pseudo code I would describe it as:
Set rng2 = Sheets("Execution Status").Range("B2:F420") where value in D5:D420 is not equal to 'Descoped'.
I have tried:
Set rng2 = Sheets("Execution Status").Range("B2:F420").Value "Descoped" and nothing gets selected.
View 1 Replies
View Related
Sep 13, 2007
I have a check box that when checked needs to take information from multiple cells and copy into multiple cells and then when uncheck remove the data from the cells.
I have attached a sample.
View 4 Replies
View Related
May 30, 2012
I am having with Excel 2007.
When I hover the mouse over a cell with comments, the status bar displays a message; for example "Cell A12 commented by A satisfied Microsoft Office user".
I only get this message for one column. The cells in all other columns give my first and second name as the author of the cell comment.
Why it is only effecting one column. I have been unable to change the annoying "commented by A satisfied Microsoft Office user" to my own name.
Is there a macro that can do this? I tried two macros I found online, both from a few years back, but neither of them worked.
View 2 Replies
View Related
Aug 17, 2009
I have built a model which aims to calculate various information/statistics based upon 2 inputs which I can change (see 'Mov_Avg_Chart' tab cells C6 and C8). In cell C6 I have identified the moving average period that I would like, and in cell C8 the period for moving average of the gradient/standard deviation of the gradient.
I have created 4 data tables (one for annualized return, sharpe ratio,max drawdown, and annualized risk/reward). The first data table can be seen in cells AE15:AH18. In cells AE16:AE18, there are the moving average period inputs (as in cell C6) and in cells AF 16,AG16 and AH 16 are the moving average gradient inputs (as in cell C8). What I am trying to do is create a table that will allow me to state a minimum moving average period (as in C6) and a maximum moving average period (as in C6), and an increment which I would like to look at the data in. Thus, in this example, the minimum moving average period would be 20, the maximum would be 40 and the increment would be 10. Also, I want to create a minimum moving average gradient (as in C8) and a maximum moving average gradient (as in C8) and an increment figure. Thus, in this example, it would be minimum of 75, maximum of 125 and an increment of 25. The point in the example is to see which outcomes based on the inputs are the most favorable.
I am having difficulty with setting up a minimum and maximum range and the incremental period. The trouble is, I don't know how to put these as additional inputs and have them drop into the data table (in place of cells AE16 to AE18 for example). Would anyone have any ideas? Also, the automated recalculation of the data table is needlessly slowing down the spreadsheet; is there a way that the data table can be recalculated only when there are changes to the input functions? I have set the calculation method to 'automatic except data tables' because otherwise it takes 15 minutes for the file to open. Thus, the data table isn't calculating automatically. That is, cells C6, C8 and the minimum and maximum range cells that I am seeking to create? Would someone be able to help me with this?
View 14 Replies
View Related
May 28, 2008
I am trying to allow the Command Button when clicked to go through multiple conditions before making a decision. So, when someone clicks on Command Button 3 the code should look to see if CheckBox1 is true, then it should check today's date, and if it is between a range of days, or even months, then it would add the number in TextBox1 with the amount already in cell H18. This event will happen every time someone clicks on the Command Button.
The end result is to have several sheets (4 total) for each quarter in the fiscal year, and if the dates are within those parameters, the clicking of the command button will update the correct sheet.
View 9 Replies
View Related
Aug 4, 2014
I am trying to use VBA to change the caption of checkboxes in "Sheet 2" when I change the value of a cell "A1" in "Sheet 1".
This code is working:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
Worksheets("Sheet 2").CheckBox1.Caption = "New Caption"End Sub
But there are 6 checkboxes in Sheet 2 and I would like to do something like this:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
For i = 0 to 5Worksheets("Sheet 2").Control("CheckBox" & i+1).Caption = "Box" & i+1Next iEnd Sub
This doesn't work.. So I guess the Control-function is wrong.
View 3 Replies
View Related
Jun 3, 2014
I have a sheet with many active x check boxes already created but with visibility off. I want code that turns on the visibility, repositions, and checks certain check boxes whose name is based on values in an array named configs.
Here is the code with the problem line indicated:
[Code] ........
The repositioning and visibility work fine. I get an "object doesn't support property or method" error on the indicated line. What is the proper syntax to do this?
View 4 Replies
View Related
Jun 4, 2008
I currently have a spreadsheet with a userform that has multiple checkboxes. I want these checkboxes to change the value of cells depending on whether or not they are checked. 1 for not checked, 2 for checked. The column of the named range the cells are in is constant for each checkbox (though it is different for each checkbox and some checkboxes will need to change the value of a cell in multiple columns). The row changes depending on the value of a combobox on the userform. I have sorted out a code that works, but it seems very long, slow, and inefficient. I'm hopping someone can show me a better way to do it.
Private Sub CmbFinish_Click()
Dim rClSkills As Range
Dim rClLookup As Range
Dim var1 As Integer
Dim iDecision As Integer
Set rClSkills = Range("TblClSkills")
Set rClLookup = Range("ClassLookup")
iDecision = MsgBox("Are you sure you wish to change Skills?", vbYesNo, "Continue?")
If iDecision = vbYes Then
var1 = Application.WorksheetFunction.Match(cboClass.Value, rClLookup, 0)
If CboAppraise.Value = True Then.............................
View 6 Replies
View Related
Jan 30, 2013
How do you changethe font size in acheckbox in excel 2010?
View 1 Replies
View Related
Aug 22, 2014
Any way to change the font color of a chart axis when a checkbox is set to true.
let checkbox be checkbox5 and chart be chart5. What I would like to happen is that if checkbox5 is true then the font color of the horizontal axis changed to grey (RGB 166,166,166), if it is false then I would like the font color of the horizontal axis to be black (RGB 0,0,0). I also would like this macro to be run every time the checkbox changes, or the corresponding cell changes to TRUE or FALSE (it is in another sheet, say sheet2). This is the code I have so far but all it is doing is showing the chart as selected and not changing the font color. I would also like it to not physically select the chart, this is for a dashboard so the selecting of the chart throws off some of the visuals a bit, but not sure how to do change the chart values without selecting it.
[Code] ......
View 7 Replies
View Related
Nov 29, 2011
I'm trying to make cell values in a range change so they appear blank when a checkbox is checked, and when it is unchecked, I need the original value to appear. I have the following so far:
Private Sub CheckBox1_Click()
If CheckBox1.Value = True Then Range("BTS").Value = ""
End Sub
...However I do not know how to change the cells back to the original value before it was made blank.
View 2 Replies
View Related
Jan 25, 2012
I have a page that is protected so formulas are not changed mistakenly, and have check boxes on the paged that link to cells and display True of False based on the checking of the box or not. If I leave the page unprotected I risk the True or False being changed. Is there a lay to protect those cell from the user but still change when the box is checked or not. The checkboxes are Form Control type.
View 6 Replies
View Related
Jun 13, 2006
I would like to set up some option buttons so that the will be become visible and enabled when a check box is checked, and the opposite when the same checkbox is not check. This is my problem
Private Sub cbpDiscAlum_Click()
Dim myOption As Control
Dim myValue As Boolean
myValue = cbpDiscAlum.Value = True
If myValue = True Then
For Each myOption In pDiscounts.Controls
myOption.Visble = True
myOption.Enabled = True
Next myOption
Else
For Each myOption In pDiscounts.Controls
myOption.Visible = False
myOption.Enabled = False
Next myOption
End If
End Sub
It is the 5th command where it gets hung up: For Each myOption In pDiscounts.Controls. I am sure I am spelling both of the names correctly: the checkbox, and the group name.
View 3 Replies
View Related
May 25, 2013
CAB HELP.EXCEL.xlsx
We are looking to have the unit number yellow box (A1) change to match the unit status box color (I15:I19) with RED being first priority then ORANGE, YELLOW and final GREEN. If any-one box is say 'Inspect" ORNAGE and the others are all GREEN, the unit number should go ORANGE; and so on. If we can get this working then we want to do a MASTER that matches in the same way that would just have unit numbers. There will be several hundred by the time we're done!
View 2 Replies
View Related
Nov 20, 2013
I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies
View Related
