I wrote this code that works on named ranges fine as it was originally intended!!
Dim Arr, Cel
Arr = Array("MainName", "PostCode", "SourceOfBusiness", "CallOrientation", _
"URN", "ApplicationReference", "ACFRep", "BranchSalesperson", "Branch")
For Each Cel In Arr
If Range(Cel) = "" Then
MsgBox Cel & " is empty, please fill in and try again!"
Range(Cel).Select
Exit Sub
End If
Next
How can I amend this to work against Textbox's in the array..?? Textbox2, Textbox4 etc etc?!?!
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Code: Sub populate() Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I had an "If" formula that would grab my numeric data from one cell and dump it into the corresponding cell depending on my letter code. I had to change my code vales from apha to numeric. I enclosed the attached spreadsheet and highlighted the cells in yellow that are in my formula that don't work any longer. I was hoping someone may have a solution.
I have some code for changing the scale of my chart axes so that when new data is inserted into the column which the chart sources from (say column B), the axis scales on my chart will automatically adjust (as the Excel algorithm sometimes leads to charts which are a bit squashed). This code works fine, and I have included it below.
I have then tried to introduce an ActiveX listbox so that when you select an item in the box, the reference number generated (1,2,3...etc) then determines which data series is inserted into column B using a vlookup function. However, when I do this, the original VBA code for automatically adjusting the chart axes no longer works.
Option Explicit Private Sub Worksheet_Change(ByVal Target As Range) With ActiveSheet.ChartObjects(1).Chart
The answer is probably "because I'm stupid", but I really can't get my head around it! I'm playing with variant arrays for the first (and possibly last) time,
The code I have is:
Sub test() Dim vSheetColours As Variant Dim iCounter As Integer vSheetColours = Range("Colours").Interior.ColorIndex For iCounter = 1 To UBound(vSheetColours, 1) MsgBox vSheetColours(iCounter, 1) Next iCounter End Sub
(Obviously this code doesn't do anything useful - but if I could get it to work, I might have a chance of making my real code work!)
Colours is a range of 8 cells. Each one has some text in, and has a different background colour. I'm trying to store the colours.
If I run this code, I get a runtime error 13 type mismatch, and it highlights For iCounter = 1 To UBound(vSheetColours, 1)
But if I replace vSheetColours = Range("Colours").Interior.ColorIndex with vSheetColours = Range("Colours").Value
I am developing a form to get the user's name. I want to put some default text in the textbox where the user types their name. I want the form to delete the default text when the user clicks on the text box or after they start typing their name.
Attached is the form and code that runs the form : UserName.xlsm
I am trying to simply change the text inside a textbox named (TextBox 2). My current line of code is giving me the error "The item with the specified name wasn't found". Any thoughts on how to troubleshoot this?
This code works fine, the problem is if I put a number in, and then backspace in the textbox to change the number, I get a runtime 13, type mismatch. This error only occurs when I delete all the numbers in the cell. For example, say the number in the cell is 5025. If i change it to 5123, that is I did not have to delete the first 5, it will work. If I want to change to something like 4167, i must delete the first 5 and it will give the error. I have only been using VBA for a couple weeks, I assume it's something simple.
Private Sub TextBox1_Change() Dim StaffCost As Single Dim AvgDriveTime As Single Dim AddlDrives As Single StaffCost = OLEObjects("TextBox1").Object.Value AvgDriveTime = Range("E5").Value AddlDrives = Range("F5").Value With Range("G5") .Font.Bold = False .Value = StaffCost * AvgDriveTime * AddlDrives End With End Sub
is there a a way to get an Array formula to work in a shared workbook? when this was put in the workbook It worked perfectly but I didn't think about the fact the workbook was going to be shared !
is there a way of changing the text direction for an ActiveX textbox? I need it to show the text in some of the boxes vertically but in other boxes horizontal.
I am trying to use the SUM IF Array formula to sum a group of numbers that fall under a heading of reference numbers over several sheets of data. For example purposes lets say my spreadsheet looks something like the below.
A B C D E 1 2600000248391 2600000393805
[code]......
The first two digits of the heading numbers are the criteria I am trying to use to separate and sum the data. For example I need to sum the value of the data below headings that falls between 1400000000000 and 1499999999999.
For the example above I used the below formula for the current Sheet and it works fine.
I wish for a text box (drawn Text Box, from the "Shapes" tab) to conditionally change its background color based on whether a cell in a different sheet says "Online" - in which case it should be green, or "Offline" - in which case it should be red. So far, the code that I have that doesnt work at all, which I'm not even sure where to place (I tried in the Workbook - Open?), is the following:
[Code] .....
I also need to do this for a total of 9 Text Boxes, if that changes anything.
I have a spreadsheet representing a month where I am trying to figure out different scenarios for employees. One scenario is that an employee could have to move to a temporary position. In that case, I need to calculate the salary payments to temporary employees in a particular work unit. I've tried several different approaches to this problem, but am still getting the error.
One method has been using this sumproduct formula:
I have a userform where the user enters prices for up to 12 items in textbox controls, and these prices are stored in an array. The textboxes are titled tbPrice1, tbPrice2, etc. I'm having an issue with the line of code I am using to store the values in an array. Every time I attempt to store them, I get runtime error 13 type mismatch, but I don't understand why.
dim PartPrices(1 to 12) as Currency
For x = 1 to 12PartPrices(x) = IIf(Trim(Me.Controls("tbPrice" & x).Value) & vbNullString = vbNullString, CCur(0), CCur(Trim(Me.Controls("tbPrice" & x).Value)))Next
A little more explanation here. Not all 12 parts will have prices, so I use the IIf statement to store the value 0 whenever the user has left a price field blank. I use trim in case they leave spaces in the price textbox or something. When the field is not blank, I take the value entered in the textbox, convert it to currency and attempt to store it in the relevant element of the array.
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
I have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code: Sub TestCode() Dim pt As PivotTable Dim pf As PivotField Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems If pi.Value = RolePick Then pi.Visible = True Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray) pf.PivotItems(i).Name = myArray(i, 1).Value pf.PivotItems(i).Visible = True Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
In a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
In column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
