At the moment I have 2 columns, A1:A5 and B1:B5. Normally A1:A5 and B1:B5 are all 0's. Every 5 minutes numbers will show up in column B and I do a procedure outside excel(feedback of DDE's) and they all go back to 0. Now sometimes the cells in A1:A5 are not all 0 after the numbers show up in B1:B5. I can reset A1:A5 to 0 with a macro button. I already built that macro, lets call that macro 'Mike'. So now I have to press that macro button every time when B1:B5 are showing zero's after the procedure and A1:A5 are not showing 0's. Is there a way a macro can constantly check if A1:A5 is non zero and B1:B5 is zero that the macro Mike is called?
I am trying to copy a range of cells, based on a set of criteria that changes constantly.
In Column A, I have numerical values that are present every 10th cell. In columns B through D, I have various text data that corresponds to the number in Column A. So for example, in A50, I have the number 46975. In the range B50-D59, I have text data that goes with the number in A50.
Each day I run a few calculations and based on the number I get, I want to find the exact match in column A, then copy all the data in columns B through D that are related. So if my calculations result in 46975, I want to automatically copy over to another worksheet the range B50-D59.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
I have a column that I want to check if a column contains any instances of particular values. If any are present I want it to return a 1, if not then return a zero.
I am looking for a macro that will check 2 things....then do something. The first is if a range of cell values in are blank. lets say Sheets("Sheet1").Range("D6:G48").
Next is if a particular cell contains a given value , Sheets("sheet1").Range("E5") should equal "Year 1" if true.
If both these are true then I want the macro to copy a range of cells from Sheets("Sheet2").Range("H6:H48") to Sheets("Sheet1").Range("D6:D48").
I tried to use IsEmpty but it seems to return a "False" if a range of cells are being tested.
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
Each sheet contains also: State - D1 Role - D2 Staff ID - D3 Date - D4
Activity group name in column A (starting from row 8) Activity type in column B (merged with C and D) (starting from row 8) Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range) CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
Code: Sub StaffDateFiller() TodayDate = Worksheets("Program").Range("I8") StaffName = Worksheets("Program").Range("I9")
[Code]....
Is there a way to either:
A) make this run constantly (as it stands now, the code works as I want it to, but I have to run the code for the operation to take place)
B) perhaps write it somehow using indirect reference (I am not sure how to do this), so that I do not have to constantly have the code look through a bunch of rows.
I simply want to check if an 8-digit value occurs in column 7, and take information from somewhere else and paste it into column 8 and column 9 of the same row.
The macros I have written are used to help me format raw data reports into something more visually pleasing. When I start out with the finalrow code, it works great, but as the macro runs, it inserts rows and deletes rows, constantly changing my FinalRow.
SO..when I have "Do until activecell.value FinalRow" or something similar, it always either stops before the true finalrow, or in some cases keeps running past the true finalrow.
Is there a way to make it recognize the finalrow at any given time in my macro? For now the only way I could think to fix it was to just have my first macro add "End" to the row below the finalrow, and all my code just calls to look for "End" to stop.
With Application.FileSearch .LookIn = "K:Departmental FoldersAccountingMonthly Accounting Package20074_2007Green BookHighlights" .Filename = "110 Summary Income Statement-Month, YTD" If .Execute > 0 Then Workbooks("Greenbook_Schedule_Preparers").Activate Dim rFoundCell As Range Set rFoundCell = Columns(1). Find(What:="110", After:=Cells(1, 1), _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False) rFoundCell.Interior.ColorIndex = 35 End If End With
End Sub
to highlight cells if a file is found in the system.
These files are saved by other users and I would like this macro to be "running in the background" while I have the file open so if someone saves a file it will automatically update. I don't want to start the macro every time I want to know if a file is saved. Can this be done?
In Exel, how can I record the highest value (automatically) from a row of numbers that changes each day. At the end of the year I still need to have the highest number recorded over the whole year even though each previous day's numbers disappear.
I don't think there is such a function but is there a way that I can have a function that constantly adds the numbers in a column and when the sum of 240 is reached it adds 30. I need it to do this only once and not keep adding at every 240 point.
to enter date/time on a sheet that is used to create a printed form. I want to ensure that the date/time are current when the form is printed, but they will actually only reflect when the workbook was opened. So, if the employee opens the workbook, then takes a break or answers the phone, when he prints the sheet the date/time may be wrong.
I need to have the worksheet either:
1. actively update the date/time information constantly 2. update it before printing, 3. or possibly have the workbook "time out" and close if there is no activity for 60 seconds or so.
I already have code entered to prevent a "do you want to save changes" promt when closing. And I am using a command button for print which closes the workbook automatically once the employee prints the form (to ensure that all other data is entered fresh everytime the workbook is used).
I have created a spreadsheet which uses data validation to allow a user to select a company, start Date, end date, and projected months in order to output different figures. I have attached a spreadsheet to this post in case that was hard to understand.
Since there is data validation, indexing, and matching going on, as different selections are made, various tables change as a result. What I mean as you open the example sheet and start messing around with the data validation boxes.
The problem I am encountering now, is creating a chart that will also keep changing as the user changes their selections in the data validation boxes. I am unsure if this is even possible, but I figured it was worth a shot to ask. On the example sheet, I have included a graph similar to the one I want, but it only contains data in a certain range of cells, rather than dynamically changing to accommodate whatever data is outputted.
Here is what I am looking for in the graph:
1. Whatever dates are selected by the user in the data validation boxes, along with the projected dates will be on the x-axis.
2. The PMPM figures associated with the selected dates, and the projected dates on the y-axis.
3. Ability to make different selections from the data validation boxes and still have a dynamic chart that keeps updating itself.
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
I want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B? =(IF(A5>0,A5/B5,""))
A B C D Result 200 250 Apple 600 Melon 251 450 Orange 225 Apple 451 700 Melon 325 Orange 751 900 Grape 457 Melon
So based on my example above, I have those data from column A to column D Now, how do I check if the value from column D belong to which category from column C based on the column A and B?
225 -> 200~250 -> Apple 325 -> 251~450 -> Orange etc.
I'm quite new in VBA and it can become a painful process to complete a working code. What I'm working on is a small process which looks up in individual cells within a range (ccy), for a particular value (EUR or USD) and if it finds that value, another cell in the same row with the value found is entered a certain text. What I wrote is:
Dim ccy As Range Dim zone As Range Dim i As Integer ...
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
