Compare Values From Different Worksheets And Write In Adjacent Cells
Aug 17, 2013
I am new to programming in excel but am looking to make a VBA that allows me to see if a value entered exists in a second spread sheet. If it does then write a comment next to it. If not then write a different comment.
This is what my spread sheet currently looks like:
Sheet1 contains all the important information:
A
B
C
D
E
F
Load
PO
Delivery
Email
Item
ShipCon
1
3456
6543
Y
5219
5129
2
2345
5432
Y
1234
4321
Sheet2 contains the items that contain a shipping condition. There are two shipping conditions Fragile and non-Fragile. The list is of Fragile items.
Item
5219
1234
I am looking for a way to have it set up that when i enter an item number in sheet in 1 it searches in sheet 2 to see if it is fragile, if it is then returns, in sheet 1 column F next to that specific item 'Fragile'. If it doesn't find it in the list returns 'non-fragile'.
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
I have another problem with this damn address file. Column H and I have data in them that is often mixed. As shown below, I have used A and B below, but its normaly in Column H and I. I would be greatul if some could write a macro to split the data into the two columns.
Rows 2-8 is what Im presented with. I would like them to look like 11-17
Note that the number in row 8 does not match, so is left for manual intervention....
I need to look at the values in Column B Sheet1 and compare to Values in Column K in Sheet2. If there is a match, I want to put "Cashed" in the cell adjacent to the cell in Sheet1.
I have two ranges of numbers stored as text on two different sheets. The first one is from product code and the second is from product category. The problem is both ranges are of different lengths and I have to find out if a product from the right is part of a particular product category. Even if the length is different the first digits are indicative of the belonging of a code. For example 1234 and 12345 are “family”-their first 4 digits match. Just to give you an example of what is desired:
So, the loop should do the following:Compare the first string from the “Category” column to each and every entry on the right, if a match exists (we have no match here for 2200) write “ok” next to it. Next trim one digit from the right from every string in the “Code” column. Compare same first string from the “Category” column to each trimmed string from “Code” column (here we should have a match 2200=2200) Write “ok” next to it Now the loop goes to the second string from “Category” column and for this one we will have to trim 2 digits from the right of each string in “Code” column to achieve the result (2323=2323) and so on.
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
Is there a way to compare specific data from three separate worksheets to see if they are equal?
I receive three daily reports that contain some of the same information that must match in order to correctly compile an Executive Report. Currently, I am doing this manually. Is there any way to automate the process to have a warning or something similar pop up if the numbers do not match?
I want to design a macro that will compare the student's completed worksheet to the model answer worksheet. This will allow the class to work at different paces depending on ability.
For each exercise, the two sheets should look identical; and so, I would like the macro to highlight any different cells in the student sheet in a colour. I would also like cells with identical values, but different formulas to be highlighted - this is why I could not use the solution posted in : "Compare two worksheets and highlight the one sheet's difference from the other one".
I need to compare 2 worksheets, one containing a list of IP adresses that need to be checked (interfaces), and another containing a list of IP addresses that have been checked (Scanned hosts), there are over 100000 scanned host entries.
I need to search the "Scanned hosts" worksheet to ensure that all of the IP addresses listed in the "Interfaces" worksheet have been scanned. I then need to place an entry next to the IP address on the "interfaces" worksheet to indicate the check date and the name of the person who checked it. It also needs to change the colour of the cells to indicate if it has been found or not found.
The code I have written so far (from piecing together different threads from MrExcel), at first glance, seems to work perfectly. However, if I replace an ip address in the "interfaces" worksheet, with one that I know does not exist - it still marks it as found.
Interfaces; IP Address System Date Checked Checked By
1.2.3.4 fred bloggs
1.2.3.5 fred bloggs
[Code] .....
Scanned hosts is just a list of IP addresses and text (168000 rows) in a single column. Format is xx.xx.xx.xx ^IP^^^^Jul 29 2012 08:01:29:000PM
Sub Compare() Dim X As Long, CurrentRow As Long, FindRow As Long, WS1 As Worksheet, WS2 As Worksheet
Set WS1 = Worksheets("Interfaces") Set WS2 = Worksheets("Scanned Hosts")
I have a results table that i want to be able to rank into a simple list 1 - 4. However the results are not in cells beside each other.
I tried using a helper column and then the Large function, however cannot get it to work.
I have attached an example sheet, and in column L4 - L7 i would like to put the team names (taken from column B) into the right order from the results shown.
I have to replicate this over a number of different pools in a number of different divisions. This is just one pool.
I have a matrix in excel to show % and $ for multiple columns - set up like this:
Rows Part 1 Part 2 Part 3 Criteria 1 % $ % $ % $ Criteria 2 Criteria 3
the $ columns are conditionally formatted to highlight the top 10 values on the matrix. is there a way to have the corresponding % cells also highlighted? The % and $ aren't both top 10, so the % would have to be highlighted based on the $ top 10 cells.
I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses). If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
There is no fixed pattern for the values, but they are separated by commas only. All i need is to compare col A and col B and return me the value in Col C like this,
Col C (col C is to know the removed value from comparison) F (for line 1)
Col D (to find the letters that are added from comparison) T (for line 2)
In the attached excel file I have two macros that create hyperlinks:
1. BalloonToNumber - Creates hyperlinks from "Oval" shapes on sheet "Op60_1" to sheet1 (column D).
2. NumberToBalloon - Creates hyperlink scheme from sheet1 (column D) to sheet "Op60_1" "Oval" shapes.
In Q #1 my macro seems to skip some shapes on sheet "OP60_1" and I simply can not figure out why.
In Q #2 my macro creates hyperlinks to shapes that do not exist and hyperlinks to numbers that are not a "100%" match, IE: 182 and 82 would share the same hyperlink?
If you open the workbook and use the hyperlinks on sheet1 they will take you to sheet "Op60_1" and shape hyperlinks from sheet "Op60_1" take you to sheet1. On sheet "Op60_1" there are some red arrows indicating the shapes that get skipped when running the "BalloonToNumber" macro. Shape color changes as the hyperlinks are selected from sheet1.....
I would like to know of a macro that can compare each two cells(start from E2 and compare with E3)to see if the values are NOT equal.
If they are equal, do nothing and if they are NOT, highlight the value.
Example: compare E2&E3, E4,E5,E6,E7,.... if for example E2&E3, E4,E5,E6,E7,.... each hat same string, do nothing, but if they were not the same highlight it with red.
This code checks two cells and highlights one cell when there is duplicate, I like the opposite one, but don't know what to change!
Code:
Sub CompareCells() Dim r As Range, cell As Range Range ("E2", Range("E" & Rows.Count).End(xlUp)).Name = ("MyRange") Range("MyRange").Select ' clear all colors from selection Selection.Interior.ColorIndex = xlNone ' loop through cells and compare Set r = Selection Set r = Selection.Resize(r.Rows.Count + 1) For Each cell In r If cell.Offset(1, 0).Value cell.Value Then cell.Offset(1, 0).Interior.ColorIndex = 3 End If Next End Sub
I'm curious if there's a way to use the Vlookup function to compare TWO values in TWO cells with two values in two OTHER cells (same row though) and return one value from another column. Something like
Vlookup(A2 & C2, Sheet2!A1:C400, 3, FALSE & FALSE)....? Does that make sense?
Say the values in A2 and C2 are in A24 and B24 respectively in Sheet2. Can it return C24 for me?
I am having a problem using data from my combobox to find the cell on the worksheet and write to the adjacent cell.
Worksheet name is Fleet ComboBox Name is ComboBox7 TextBox name is TextBox3 CommandButton1
I would like to be able to take the text from ComboBox7, find this text in Col A of worksheet Fleet and write the Value of TextBox3 in the adjacent cell in Col B. when the CommandButton1 is pressed.
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top. The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F), Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That 1. puts the name of the sheet I am copying from in column A 2. the deadline date in Column B (that date is always in C10 of each worksheet) 3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet Dim DestSh As Worksheet 'worksheet in which to paste summary Dim Last As Long Dim CopyRow As Long 'row to copy Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1) End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I want to compare cells and use a range of values to calculate totals (i.e. count if cell A1=boy and cell A2 equals either "fat" or "skinny")? Also, I tried using wildcard character "*" in the SUMPRODUCT formula, which didn't work (i.e. if cell A1="boy*" would return at TRUE if the cell contained "boy", "boys", "boy and girl", etc.). Is there a way to include wild card characters in a SUMPRODUCT formula like the ones described above?
I have two sets of data from columns A:N (O is blank) & P:AC. Column A & P are account numbers. I want to compare columns A & P for exact matches, there will never be any duplicates in either of these columns by themselves. If there is a match I would like that entire row to align, if there is no match I would like a row to be inserted. I have attached a copy of a worksheet of what I am looking to have done.
I have a column of numbers (column A) which I'd like to compare to an adjacent column of numbers (column B) and, by row, determine if the number is larger.
If it is, I'd like to place a different colour on the cell. What is the formula I need to use to accomplish this?
Ex: Col A Col B 30,000 5,000 - A is larger than B, therefore A is formatted RED 20,000 20,000 - A is the same as B, therefore no format applied 10,000 15,000 - A is less than B, therefore A is formatted GREEN
