Macro To Check If Range Of Cells Values Are Balnk.
Jan 8, 2009
I am looking for a macro that will check 2 things....then do something.
The first is if a range of cell values in are blank. lets say
Sheets("Sheet1").Range("D6:G48").
Next is if a particular cell contains a given value ,
Sheets("sheet1").Range("E5") should equal "Year 1" if true.
If both these are true then I want the macro to copy a range of cells from
Sheets("Sheet2").Range("H6:H48") to Sheets("Sheet1").Range("D6:D48").
I tried to use IsEmpty but it seems to return a "False" if a range of cells
are being tested.
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
I have cells that they're values should be equal B6=B11, B7=B12, B8=B13, E6=B14, E7=B15, E8=B16, I want a macro that if the values are not equal then the background should be RED and a pop up message "The values should be equal".
At the moment I have 2 columns, A1:A5 and B1:B5. Normally A1:A5 and B1:B5 are all 0's. Every 5 minutes numbers will show up in column B and I do a procedure outside excel(feedback of DDE's) and they all go back to 0. Now sometimes the cells in A1:A5 are not all 0 after the numbers show up in B1:B5. I can reset A1:A5 to 0 with a macro button. I already built that macro, lets call that macro 'Mike'. So now I have to press that macro button every time when B1:B5 are showing zero's after the procedure and A1:A5 are not showing 0's. Is there a way a macro can constantly check if A1:A5 is non zero and B1:B5 is zero that the macro Mike is called?
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
I have a column that I want to check if a column contains any instances of particular values. If any are present I want it to return a 1, if not then return a zero.
I want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B? =(IF(A5>0,A5/B5,""))
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
I have a requirement where i need to check whether a value is entered in cells within a collumn and if so, it would set a default value to a cell on the same row but with a different collumn. this needs to occur on the run.
there are columns that i need to check and change the status column cell in accordance.
column client_name clumn date column start_time column end_time column status
first the macro is to check whether there is a client_name, if a value exist (example, smoth, doe, allen) it would set a default value to the status column on the same row as deviation (options are served, queued, deviation). then it would check if the date & time columns have value and is less than current date time, it would change the status cell to queued.
i know that there are several nested checks (if then if then if then) the problem is that vba is not one of the languages that i master hence im totally lost here.
i can add the finalizing features and rollout the spreadsheet.
and one more thing. i have multiple sheets with the same layout where these checks and changes need to be performed
Each sheet contains also: State - D1 Role - D2 Staff ID - D3 Date - D4
Activity group name in column A (starting from row 8) Activity type in column B (merged with C and D) (starting from row 8) Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range) CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
Upon deactivation of a worksheet I am trying to check a range of cells("B8:M8") for empties. If any cells are empty I want to generate a MsgBox that asks the user to remedy the situation. It is not necessary to tell them which cell is empty but it would be nice. Can anyone help me format this code?
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
I have X amount of cells (formulasheet) , these are used to input data, which is then summarized into a sheet on the same file. I'm trying to find a code that forces the user to fill out all the fields. If the user do not, the "submit button" will not proceed, at least not work. Almost like a forum registrating, where it is required to fill it all some mandatory fields in order to proceed.
The cells datatypes are mixed, some are Integer and some are String.
Is there anyway that are code can be written "if the cell(s) is FALSE (nothing in the cell) then display message.
Is there a way to prevent a workbook from closing or being submitted until information has been entered into the following cells? B78, B80, B82, B84, B86, B88, B90, B92, B94, B96, B98, B100, B102, B104, and B106?
The application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.
Sub check_clear() Range("g1:g8").clear If IsEmpty(Range("a1")) Then Range("g2") = "A1 empty" End If If IsEmpty(Range("b1")) Then Range("g3") = "B1 empty" End If If IsEmpty(Range("c1")) Then Range("g4") = "C1 empty" End If If IsEmpty(Range("d1")) Then Range("g5") = "D1 empty" End If..............
The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution
Is there any way to use formula or VBA to highlight cells which contain the correct spelling?
For example i have columns A filled with words in each cell but need to highlight which ones have the correct spelling, as there are more with incorrect so i need to visually see the correct spelling.
I have completed a formulation and included in a macro but I dont know about coding to check for specific cell string values before macro will take off. I want macro to check that if specific cell text are not matched, use MsgBox to display the wrong versus correct cell string text, then vbOK to exit macro. Also, if Range(B2:G2,J2) are completely blank, use MsgBox to display "missing data", then vbOK to exit macro.
cell B =REQ cell C =SS cell D =Current Stock cell E =PO cell F =Sales Order cell G =In-coming cell L =unit cost
If these cell texts (U or L case will do) are in their specific cells, macro will proceed. If either one or some of these cell texts are not matched, display MsgBox of the wrong and correct cell texts. Then button OK to stop macro run. If Range(B2:G2,J2) are completely blank, use MsgBox to display "missing data", then vbOK to exit macro.
Column 'N' and 'O' will be used for inputting information and will never be hidden
Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro
Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden
The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )
If the loop finds 'Req' it will search in column 'N' of the same row for any data at all If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all If it finds data in column 'O' also, then all 3 parameters have been met
The loop should continue checking for these 3 items through row 500
If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"
Upon closing the message box, the file should save and then exit
If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'
In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'
That last part will give the user a tool to see where they might have forgotton to enter data.
