I have attached a sample for better understanding. First of all, I need to check for the highest value in Col B and lowest value in Col C in the range from Time 0900 to 1100 only. I need to use the check time function (which i have no ideal how) rather than selecting the number of rows to check.
Is there a good way to check two columns at the same time and return the value in the 3rd?
Example
12 0.07 8
12 0.37 10
12 0.82 12
12 1.30 15
12 3.90 22
12 8.00 28
12 15.00 35
I look for 12 in the first column with vlookup but I need to also look for a figure in the 2nd column which is greater than my figure. So say I want 12 & 6.0 I would want the formula result to be 28 because the nearest larger number in the table column 2 is 8.00.
Is there a simple function to check if a time has been or is entered in a cell, just like the IsDate function.
View 8 Replies View RelatedI am using VBA to determine the data type of the active cell value. I have the following:
'To check Number
IsNumeric(ActiveCell.Value)
'To check Date
IsDate((ActiveCell.Value)
'To check Formula
ActiveCell.HasFormula
'To check Text (*not perfect solution)
WorksheetFunction.IsText(ActiveCell.Value)
However, I cannot find the way to check for Time. In addition, the method IsText will return True even if the active cell value is a date.
I have a spreadsheet in which a check box fills the corresponding cell with the value "TRUE" if checked and "False" if unchecked. I use this check box for several functions (e.g. assigning a unique ID number). One of the functions I would like to make is a time and date stamp in another column when a user checks a box.
I have perused some of the past topics on this subject and there are a few hiccups in the other fixes.
1. I can't simply set the iterations to one because this sheet also is used to calculate expenditures, fund balances, etc. I need the calculations to be ongoing.
2. I currently have a check box macro that placed a check box on a thousand rows. It may require more rows later on. I need a solution that sets up a time stamp for all of these rows, not just a macro for one row at a time.
3. I need the time stamp to be static. I need to know when entries were made. I cannot use track changes, because we will be using this data to measure the effectiveness of our process. I need to be able to add and subtract the time between the timestamps.
I've done quite a bit of searching in the forum and online and haven't found anything that's generic and can be used at anytime.
What I'm looking for is a way or for code that tells you how long it takes a macro to run from start to finish, something that can be used to time any macro. I've seen some threads in the forum where people indicate that it took x amount of seconds for their macro to run but not sure how to do it.
I have a column A with some dates at this format "dd-mm-yyyy hh-mm".
In this list, some hours are missing, and I don't know which ones.
In order to find the missing hours, I created an additional column B, displaying all the hours, this way:
B1=01-01-2006 00:00:00
o
B1=A1
And then : B2=B1+"01:00:00"
Then, in column C, I compare both columns A and B:
C1=IF(Value(B1)=Value(B2),ok,missing)
As a result, I first get some "ok", and then more and more "missing" statements, even though the dates look the same.
I checked the numerical values of my dates. At the first "missing" statement, I saw that there is a slight difference in the numerical values, at small decimals...
Can you tell me how to define my date /time in a good way, in order to avoid this kind of problems, please?
(I could take the int part of the numbers, but this could lead to further errors, so I prefer to define my dates in the right way, from the beginning).
what I want. It relies on an input box asking the user to enter a part code, which when found creates a duplicate copy. However, if the user enters a part that doesn't exist I get a run-time error. Can anybody point me in the right direction so when a user enters an incorrect part they get a message telling them it doesn't exist.
Private Sub SortTest_Click()
Dim s As String
Dim r As Excel. Range
Range("A2").Activate
s = InputBox("Enter the number you wish to find")
If StrPtr(s) = 0 Then
MsgBox "You must enter an existing part number!"
Else
Set r = Cells.Find(What:=s, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
Range(Cells(r.Row, "A"), Cells(r.Row, "AH")).Copy
Sheets("APL").Cells(r.Row, "A").Insert Shift:=xlDown
Application.CutCopyMode = False
Application.Goto Sheets("APL").Cells(r.Row, "H")
Selection.Offset(-1, -5).ClearContents
Selection.Offset(-1, 0).Select
End If
End Sub
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
What I need is a formular/vba code that can divide hours into different time ranges. The picture below shows an explanation.
In example 3 there time range analyzed goes from saturday till monday. Here Sunday should get 24 hours and the time range 23-08 for weekdays is at this point 00-08.
I've tried everything I could imagine to get this one working,
1) I need to add an edit check
2) have a copy of Active Workbook Path stamped onto spreadsheet with date and time to create a visual record of where the file has been saved (described after the code below).
1) I need to verify that two cells (S7 and S9) are not blank before running my code below (=IF(OR(S7<>"",S9<>""),RUN CODE,"You must select your Provider or Division before you can save this document")).
- If both of these cells are blank a message box should notify the user that they must select the provider and/or division before they can continue with the save.
- If one or more of these cells are not blank the code below should run.
I found this formula similar to other formula
NETWORKDAYS(D1,F1)-1)*"18:00"-"9:00")+IF(NETWORKDAYS(F1,F1),MEDIAN(G1,"9:00","18:00"),"18:00")-MEDIAN(NETWORKDAYS(D1,D1)*E1,"9:00","18:00")
By the way ....D1 = start Date
F1 = End Date
E1 = start Time
G1 = End Time
It's GREAT! But now I need include time from 6:00 a. m. to 10:00 p. m. (I already modified your formula:
(NETWORKDAYS(D1,F1)-1)*("22:00"-"6:00")+IF(NETWORKDAYS(F1,F1),MEDIAN(G1,"6:00","22:00"),"22:00")-MEDIAN(NETWORKDAYS(D1,D1)*E1,"6:00","22:00")) because are regular working hours in Colombia but:
1. All the days (Monday to Saturday) are working days
2. I just want to calculate the time in shifts, I don't specify the start date and end date. Example: 8:00 p.m. to 11:00 p.m. Result: 2 hours, because 1 hour is after 10:00 p.m.
This are two different options, so I need two separate formulas.
I need a formula to calculate the time (in hours/fractions of an hour) that is "covered" for each hour of the day between a range of times. In other words, I have a "START TIME" and an "END TIME" and for each hour of the 24-hour clock, I want to know how much time this range covers.
For example, if my start time is 3:30am and my end time is 5:15am, for the 3am hour, the formula would return 0.5 hours, for the 4am hour it would return 1.0 hours, for the 5am hour it would return 0.25 hours, and for all other hours it would return 0.0 hours. The range of START TIME and END TIME can be up to 24 hours (but not more), but the tricky part is that the START TIME can be on the day BEFORE the END TIME (e.g., START TIME of 10:35pm and END TIME of 5:45pm the next day).
I want to copy and paste a PARTICULAR RANGE from one workbook to another workbook. I want to select the data range from "09:55:00" to "10:00:00" which is in the cells in Column "A" an copy paste it to another workbook. The rows are not constant. The data "09:55:00" to "10:00:00" can e present on any row but is present on the same column i.e "A".
View 2 Replies View RelatedIs there a formula that I can use to check that all the depths are in a range of 1 to 5. If one depth is say 6 then this must be flagged up
View 4 Replies View RelatedIs there a way to test if let's say range a1:a10 contains a value of cell b1.
I would be thankful to get the VBA code to do that
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
View 8 Replies View RelatedI need some code that will check the valueof a combobox to see if it is a named range. i'm not sure where to start really? i know i probably need to use "ListNames" in there somewhere?
View 5 Replies View RelatedHi all, this might sound really easy but I have a Named Range in excel 2003.
Now I'd like to write a VBA code to check if this range exists before carrying on futher computations.
If I have a named range ("colors") which contains a bunch of different colors, and in a separate cell, I want to test whether a particular color is present in that range, how would I do that? For example:
Red
Green
Blue
=if([range contains "yellow"],1,0)
this formula would return 0.
=if([range contains "green"],1,0)
this formula would return 1.
I'm having trouble with the part in []'s.
I have this code that checks for blank cells and it works fine:
If Range("A15").Value = "" Then
I would like to change it to look in six specific cells, but the following code doesn't work:
If Range("A15:F15").Value = "" Then
What would be the best way to check if e.g. all the values in range A1:A4 were the same?
View 9 Replies View RelatedI have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.
Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""
[Code]...
But this won't start too after processing the do while line. How this .value command works.
I have a spreadsheet in which I have named columns. All columns have associated columns in different tabs. Using a toggle button I want to hide or unhide these associated columns on all tabs at the same time. Here is what I have so far:
Private Sub ToggleButton1_Click()
Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
My problem is I want to have a single string to hide/unhide the following Named columns on all sheets -- (Sheet 1 (COLU), Sheet 2 (DRCOLU), Sheet 3 (F1CCOLC), Sheet 4 (MSCOLC), Sheet 5 (PSCOLC) and Sheet 6 (POCOLC)
I was hoping to use something like -- Range("COLC, DRCOLU, F1CCOLC, MSCOLC, PSCOLC, POCOLC").EntireColumn.Hidden = True
I receive an error when I try to use it because only one of the names is used for each sheet. It needs to first verify the name exists on the sheet and if so, perform the Hide/Unhide function and if not move to the next name. When all names have been used, move to the next worksheet and perform the same action until all worksheet have been gone through.
is there a way to check for a value in a range, and return the value if it is not in the range, else return nothing?
H1 =85
B | C | D
25 | 50 | 75
40 | 30 | 10
12 | 9 | 66
None of the following IF statements will work:
{=If($B2:$C4="","",If(B$2:C$4<>H$1,H$1,"")}
{=If($B2:$C4="","",If(B$2:C$4=H$1,"",H$1)}
If my cell range in Sheet 2, K2 to K25 is empty/blank, then I want to fill that blank range with the same number/Value. It can be a 0 or a 1 or any other Value as required. But an Error 13. Type Mismatch message appears. Where is the error if I'm trying to fill the range with a Value if blank ?
Sub Macro_2()
Sheets("Sheet2").Select
Sheets("Sheet2").Range("K2").Select
If Sheets("Sheet2").Range("K2:K25").Value = "" Then
Sheets("Sheet2").Range("K2:K25").Value = "1"
End If
Sheets("Sheet3").Select
End Sub
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
This does not seem to be working and I do not know why.
If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If
Upon deactivation of a worksheet I am trying to check a range of cells("B8:M8") for empties. If any cells are empty I want to generate a MsgBox that asks the user to remedy the situation. It is not necessary to tell them which cell is empty but it would be nice. Can anyone help me format this code?
View 2 Replies View Related