Check Range For Any Data
Jul 19, 2007
If my cell range in Sheet 2, K2 to K25 is empty/blank, then I want to fill that blank range with the same number/Value. It can be a 0 or a 1 or any other Value as required. But an Error 13. Type Mismatch message appears. Where is the error if I'm trying to fill the range with a Value if blank ?
Sub Macro_2()
Sheets("Sheet2").Select
Sheets("Sheet2").Range("K2").Select
If Sheets("Sheet2").Range("K2:K25").Value = "" Then
Sheets("Sheet2").Range("K2:K25").Value = "1"
End If
Sheets("Sheet3").Select
End Sub
View 2 Replies
ADVERTISEMENT
Apr 12, 2009
I am using the following code to check data is entered in certain cells...
View 2 Replies
View Related
Jun 9, 2014
I have 400 source files containing (among others) 8 sheets with daily results: "Fri 23", "Mon 26", "Tue 27", "Wed 28", "Thu 29", "Fri 30", "Sat 31 (if applicable)", "Mon 2".
Each sheet contains also:
State - D1
Role - D2
Staff ID - D3
Date - D4
Activity group name in column A (starting from row 8)
Activity type in column B (merged with C and D) (starting from row 8)
Activity time in columns E:GV (starting from row 8). Usually, there is none or only one value in whole range (e.g. E8:GV8). But sometimes there are two values.
Customer ID in row 6 (value appears only if time was reported in E:GV range)
CC Number in row 7 (value appears only if time was reported in E:GV range)
It's all about transferring values from all daily sheets in all files (.xls) sitting in folder C:WADFinal to one simple table (WAD_Consolidation_file.xls, sheet "Consolidated") consisted of 9 columns: Staff ID, Role, State, Date, Activity Group, Activity Type, Minutes, Customer ID, CC Number.
Additional note if two values exist in the same row they should be copied as two separate entries to consolidation file.
View 9 Replies
View Related
Jan 14, 2009
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
View 4 Replies
View Related
Nov 20, 2009
Is there a formula that I can use to check that all the depths are in a range of 1 to 5. If one depth is say 6 then this must be flagged up
View 4 Replies
View Related
Aug 17, 2008
Is there a way to test if let's say range a1:a10 contains a value of cell b1.
I would be thankful to get the VBA code to do that
View 9 Replies
View Related
Mar 26, 2010
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
View 8 Replies
View Related
Dec 18, 2008
I need some code that will check the valueof a combobox to see if it is a named range. i'm not sure where to start really? i know i probably need to use "ListNames" in there somewhere?
View 5 Replies
View Related
Jan 13, 2009
Hi all, this might sound really easy but I have a Named Range in excel 2003.
Now I'd like to write a VBA code to check if this range exists before carrying on futher computations.
View 4 Replies
View Related
Jun 16, 2009
If I have a named range ("colors") which contains a bunch of different colors, and in a separate cell, I want to test whether a particular color is present in that range, how would I do that? For example:
Red
Green
Blue
=if([range contains "yellow"],1,0)
this formula would return 0.
=if([range contains "green"],1,0)
this formula would return 1.
I'm having trouble with the part in []'s.
View 5 Replies
View Related
Jan 20, 2012
I have this code that checks for blank cells and it works fine:
If Range("A15").Value = "" Then
I would like to change it to look in six specific cells, but the following code doesn't work:
If Range("A15:F15").Value = "" Then
View 4 Replies
View Related
Mar 7, 2012
What would be the best way to check if e.g. all the values in range A1:A4 were the same?
View 9 Replies
View Related
Aug 22, 2012
I have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.
Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""
[Code]...
But this won't start too after processing the do while line. How this .value command works.
View 7 Replies
View Related
Sep 8, 2009
I have a spreadsheet in which I have named columns. All columns have associated columns in different tabs. Using a toggle button I want to hide or unhide these associated columns on all tabs at the same time. Here is what I have so far:
Private Sub ToggleButton1_Click()
Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
My problem is I want to have a single string to hide/unhide the following Named columns on all sheets -- (Sheet 1 (COLU), Sheet 2 (DRCOLU), Sheet 3 (F1CCOLC), Sheet 4 (MSCOLC), Sheet 5 (PSCOLC) and Sheet 6 (POCOLC)
I was hoping to use something like -- Range("COLC, DRCOLU, F1CCOLC, MSCOLC, PSCOLC, POCOLC").EntireColumn.Hidden = True
I receive an error when I try to use it because only one of the names is used for each sheet. It needs to first verify the name exists on the sheet and if so, perform the Hide/Unhide function and if not move to the next name. When all names have been used, move to the next worksheet and perform the same action until all worksheet have been gone through.
View 9 Replies
View Related
Apr 23, 2006
is there a way to check for a value in a range, and return the value if it is not in the range, else return nothing?
H1 =85
B | C | D
25 | 50 | 75
40 | 30 | 10
12 | 9 | 66
None of the following IF statements will work:
{=If($B2:$C4="","",If(B$2:C$4<>H$1,H$1,"")}
{=If($B2:$C4="","",If(B$2:C$4=H$1,"",H$1)}
View 2 Replies
View Related
Apr 26, 2006
I have attached a sample for better understanding. First of all, I need to check for the highest value in Col B and lowest value in Col C in the range from Time 0900 to 1100 only. I need to use the check time function (which i have no ideal how) rather than selecting the number of rows to check.
View 9 Replies
View Related
Jan 11, 2009
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
View 12 Replies
View Related
May 28, 2014
This does not seem to be working and I do not know why.
If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If
View 1 Replies
View Related
Dec 11, 2008
Upon deactivation of a worksheet I am trying to check a range of cells("B8:M8") for empties. If any cells are empty I want to generate a MsgBox that asks the user to remedy the situation. It is not necessary to tell them which cell is empty but it would be nice. Can anyone help me format this code?
View 2 Replies
View Related
Sep 1, 2009
I am trying to search a column for specific values.... if the cells in the column equal X, Y, or Z then I want to keep them. Anything else, should be deleted....and not just the cell the entire row that it is in.
So I'd like it to search column E for a number of different values, if equal keep the data. If not (say E6 is not any of those values) then delete that row (all of row 6)
View 11 Replies
View Related
Sep 28, 2011
I have a list of strings as such
A1: A
A2: B
A3: D
A4: E
How can I check to see if this range is sorted with vba?
I have searched but havent found anything for strings.
I can only think of adding each cell to an array, creating a copy array, sorting the copy array and then comparing the two arrays. I want it to return TRUE, FALSE or 1, 0
View 3 Replies
View Related
Dec 13, 2011
detecting if a range has colored cells. What would the correct syntax be for the line in red?
Sub CheckForDups()
Dim ColumnNumber As Integer
ColumnNumber = 1
Columns(ColumnNumber).Select
Selection.FormatConditions.AddUniqueValues
Selection.FormatConditions (Selection.FormatConditions.Count).SetFirstPriority
Selection.FormatConditions(1).DupeUnique = xlDuplicate
[code]....
View 1 Replies
View Related
Feb 7, 2012
If I want to check a range of cells how would I modify this to do that?
Single Cell (working):
=IF(AND(Sheet1!T42=Sheet2!J68),"Yes","No")
Range (not working):
=IF(AND(Sheet1!C64:J64=Sheet2!C33:J33),"Yes","No")
View 2 Replies
View Related
May 14, 2012
If the data entered in Column "I" starting from row4, exists in range "X4:X12" then "Pend for audit" should appear in Column "R" of the corresponding row.
below is the coding Iam using.
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim StateName As String
Dim CName As String
Set Cells_Changed = Target(1, 1)
[Code]...
View 1 Replies
View Related
Apr 12, 2013
If a name is entered in cboRepName combo box, I want to check if the name matches the list of names in the named range "Names" found in sheet repInformation. If the name is not found, then perform tasks.
Here is what I have so far, of course is not working, but I think I am close.
Code:
Private Sub cboRepName_BeforeUpdate(ByVal Cancel As MSForms.ReturnBoolean)
Dim repName As String
Dim nRange As Range
[Code].....
View 2 Replies
View Related
May 23, 2014
I need to judge whether a number falls between a range of 2 numbers.
Ex:
A1=332.024 B1=349.956
C1=335.23 So D1 must give 1 (since between the range) else 0.
If C1=332.02 D1=0
If C1=349.9566 D1=0
If C1=332.024 D1=1
If C1=349.956 D1=1
What formula should be punched in D1?
View 8 Replies
View Related
Dec 10, 2007
I have this formula =COUNTIF(WallA,D35) which works great unless the named range is deleted. Is there a way to check to see if the named range is valid in formula?
View 9 Replies
View Related
Nov 3, 2008
I have an if statement as follows:
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
View 9 Replies
View Related
Nov 4, 2008
If I have the following cells and values
A1 = 0
A2 = 0
A3 = ""
A4 = 0
I want a vba if statement that makes A5 = "Numeric.
If I have:
A1 = 0
A2 = 0
A3 = A
A4 = 0
I want A5 to = "Non Numeric"
Similarly if:
A1 = ""
A2 = ""
A3 = ""
A4 = ""
I want a5 to = "Non Numeric"
Is there a way to do this without looping through each cell in the range?
View 9 Replies
View Related
Nov 10, 2006
I am trying to have a macro to take a value from a text box and see if it is matches a value that is in a specified range. If it comes back true then it shows an error message. This code is working for text values, but if it is numeric it will not find find it.
Sub SearchForMatch()
'Procedure level declarations
Dim rngCell As Range
Dim bMatch As Boolean
' Loop through each cell in the nominated range
For Each rngCell In Range("B4:B50")
'If there us a matching value then set your
'boolean flag to true and exit the loop
If rngCell.Value = TextBox1.Value Then
bMatch = True
Exit For
End If
Next
'If a match was found then alert the user
If bMatch Then MsgBox ("Name already exsists.")
End Sub
View 4 Replies
View Related
