Index Formula Should Display Blank?
Jul 22, 2014I am trying to use Index but problem is where there is no Value Index should show Blank instead it is putting 0 or N/A
View 5 Replies
ADVERTISEMENT
Prevent Blank Date In If And Index Formula
Aug 10, 2009Prevent blank date in if and index formula. I have the following formula:
View 2 Replies View RelatedFormula To Display Data When Some Cells Are Blank
May 6, 2013I have attached a spreadsheet that is causing me difficulty. I currently have a formula that is displaying in V3 the highest grade when it looks up the data in A3,H3 & O3. Then this is repeated for W3 when the data is looked up in B3, I3 & P3 etc etc... BUT
I need the formula to work if only block one is complete i.e. (1 Explore grade, 1 Plan Grade, 1 Make Grade etc).(please see the example to understand what is meant by a block)
The current formulae will only display a grade if all cells are complete i.e., A3,H3 & O3.
So I am looking for the formula to:
If A3 has a grade in it I wish V3 to display it because its the only grade. (even if H3 & O3 are blank)
As and when H3 has a grade filled in I want the formula to select the highest and display it in V3 (again even if O3 is blank)
As and when A3, H3 & O3 has a grade in it I wish the formula to lookup and display the highest in V3
Ans this repeated for all different areas, Explore, Plan, Make etc.
example doc with formula.xlsx
Row Indexing Formula To Only Display Non Blank Cell Values
May 30, 2014In range B4:M4 some cells contain values and some are blank. I am trying to write a formula that will omit the blank values and just give me the nonblank values. The code below returns the FIRST nonblank value, but I can't seem to figure out how to drag it across a row to get the others. I want to ensure that the numbers stay in the same order (so no largest/smallest formulas), but the blank cell values need to be removed.
This would then need to be repeated for (B5:M5, B6:M6, ETC).
[Code] .....
Display/Show Blank Cell Via IF Formula/Function
Sep 27, 2006The following are on a sheet:
A1 = 5700
B1 = 235
C1 = 17:14
D1 = 5922
$E$1 = 09:01
$F$1= 3
$E$1 and $F$1 are (the only) absolutes/constants.
A2 contains the following:
=IF(A1>D1,B1,IF(A1+B1<D1,"d",IF(AND(C1<$E$1,B1<$F$1),"",B1))))
This translates as:
=IF(5700>5922,235,IF(5700+235<5922,"d",IF(AND(7:14<09:01,235<3),"",235))))
The result is a variable/number (235), "d" or a blank cell ("").
This formula is in a column and works fine where there are numbers in corresponding cells. The problem arises with corresponding cells which appear blank (show no values) but contain references to other cells: they result in a "d" when nothing should be displayed.
So while a corresponding blank cell is correct if it shows no values, it gives me this problem - I don't want "d" or anything.
Excel 2010 :: VLookup Result Blank If Column Index Number Is Blank
Mar 3, 2014The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
Filter With Formula: FILTER A Range And Display The Unique Items, One Below The Other, WITHOUT Blank Cells
Feb 10, 2008How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedIndex Function To Display Results In Same Cell
May 29, 2014I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
Index And Match - Display Customer Name Taken From Table
Jul 27, 2014Look at the image I've attached.
I'm trying to have the table on the right match the first two columns to display the customer name taken from the table on the right.
testtable.jpg
Index/Match To Return A Blank Cell
Feb 25, 2009make an adjustment to my Formula so that if the Index match locates a cell that is blank it returns a blank cell rather than a 0. I know we need to add in =IF(iserror( but i am aving trouble..
View 5 Replies View RelatedDisplay Nothing When The Sum Is Blank.
Dec 6, 2008when I use the =sum command of a certain cell and that cell contains no data I am getting a $0.00. I understand why, but can I display just a blank cell if no data is found in the cell?
View 3 Replies View RelatedDisplay Blank If Condition Is Met?
Jan 17, 2013The two formulas below are used for splitting a cell reference in two after the "-"
Formula:
I need to be able to add an extra formula to the above which will only display if the source cell of the reference is NOT "0000 - Extra Core Hours".
IFERROR Won't Display Blank Cell
Mar 13, 2014I am using this formula, but if the referenced cell is blank, it keeps putting a 0 in the cell. I want the cell to be blank if the referenced cell is blank.
=IFERROR(INDIRECT($E$1&"!$C4"),MATCH(INDIRECT($E$1&"!$C4"),""))
How Do I Get Concatenate To Display Blank Instead Of False?
Dec 9, 2008I am using concatenate to create a list of bottles based on other data, so that each cell contains a different combination of bottles.
The problem is that the list appears but there is also FALSE for every bottle that doesn't relate to that cell.
Is there a way to create a formula such that nothing appears if it is not true?
And is there a shorter way of writing what I am after, I can't quite finish the formula becaise it is so long.
This is what I am using: .....
Blank Display If Figures Not Yet Entered
Jun 19, 2009I have this formula in a cell:
=IF(AND($D4=H4,$F4=I4),3,IF(SIGN($D4-$F4)=SIGN(H4-I4),1,0))
but i need to somehow incorporate a formula that only shows this if a cell has a value present.
I know as an example its something like:
=IF(C2="","",C3)
but i dont know how that would go in my existing formula as i dont know how to stack IF statements?? (a very kind person on this forum did the original formula btw)
the cell that i need to have as the 'blank or not' is D4.
Check For Return Of 0, Then Display Blank
Aug 27, 2009I have a vlookup formula I would like to add another If statement to.
=IF(ISNA(VLOOKUP($O2,Table!$A$2:$I$72,9,0))=TRUE,"Not In Table",VLOOKUP($O2,Table!$A$2:$I$72,9,0))
This works fine, but if the field that it is returning (9 in the case above) is blank, I get a zero in the destination cell.
Can I add another check in this formula to see if the destination cell is zero, but display a blank?
Display A Message If There Is A Blank Row Between A Range
Jan 9, 2007I've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
How To Format Selected Blank Cells To Display 0
Feb 21, 2013Would like to use formatting and no formulas.
View 2 Replies View RelatedDon't Display Blank Entries In Drop Down Menu
May 10, 2007If i make the listfillrange of my combobox a named range, is there a setting in the combobox that allows it to ignore any blank cells in the named range.
Lets say my named range is cells A1:A5 but only A1 has a value, the rest are blank.
The combobox drop down menu will display the value of cell A1 and then 4 blank rows. Can i make the combobox igoner the blank rows and only display cells A1 in the drop down menu?
VBA To Display Combo Box In The Next Blank Cell In Column A
Jul 8, 2009Been doing pretty good up till now but I can not figure out how to get a combo box in the first blank cell of column A. I am using the named range 'Units' and there are almost 900 of them so I need the combo box.
View 8 Replies View RelatedMake A Cell Display 0 Or Remain Blank Instead Of #N/A?
Aug 15, 2009How can I make a cell display 0 or remain blank instead of #N/A?
I have several cells that are either VLOOKUP or just normal sum functions but they all display #N/A.
Leaving Blank Cells Blank In Dragging Formula Combining Different Formulas In One Cell?
Aug 2, 2014I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedIF Blank Or If Not Blank Function That Works With Adjacent Cell With Formula In It?
Aug 12, 2014I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
Change Display Of (blank) Cells In Pivot Tables
Feb 2, 2010i've attached a pivot table where some cells are empty (see GCP tab). i want the empty cells to appear empty, and not as they currently appear, with the word "blank" in parentheses. i am aware that if i enter 2 spaces in any cell and press return, all empty cells in that column will also appear empty. is there any other way to have empty cells in a pivot table appear empty?
View 4 Replies View RelatedDisplay 'Date' Cell As Blank Instead Of Default Year 1900
Nov 19, 2009Three columns.
A - Date last checked
B - Due Date
C - Actual Date checked
Currently column B is formatted to Date and simply has =A+84 and will display a date 3 months in future. However if there is no date in column A, then column B displays a default 1900 date.. Is there a way of making this blank if there is no date in col A?
Conditional Formatting For Blank Cells To Display Custom Text
Feb 17, 2012I have a range of cells with numeric values or blanks. I set up a Conditional Formatting rule with this range selected: New Rule > Format only cells that contain > Format only cells with: Blanks; then I set the formatting to a light green fill and on the Number tab > Category = Custom > Type: "blank"
The blank fields get the light green fill, but no text; that is, the value displayed is still blank.
I go back to edit the CF rule and change Blanks to No Blanks. The results are what I expect: the cells with numbers display the text blank and have a green fill; the blank cells have no fill (white).
This is my testing criteria. I eventually want the empty cells to display 0 (zero). I tried setting Custom > Type: 0 (the number placeholder zero) and Type: "0" (literally the number zero), and neither works.
I have tried this with Format only cells with Cell Value equal to [the address of a blank cell].
I tried to set the value as "" but kept getting =""""; and ="" became ="=""" ???
I have tried this with Use a Formula... using the len()=0, isblank(), and other approaches, all with the same results.
I also made sure the option [x] Show a zero in cells that have a zero value is checked.
With all approaches to identifying the blank cells, they ARE obviously being recognized as blank values: the fill color is being applied to the right cells; and when Not Blank is the criterion (or a negation of a formula), the blank ones are not formatted. But blank cells will not display the text as defined in the Custom Formatting.
And this isn't an issue of "If the cell displays 'blank' it's no longer blank, so the rule doesn't apply" - HERE'S WHY: I set up a second CF rule that sets the Font to red when the value is greater than zero and had this CF rule follow the CF rule for No Blanks (the test above that works). Cells with positive numbers displayed blank in red, cells with zeros or negative numbers displayed blank in black. This clarified that the actual value of the cell is being evaluated, not the displayed value after Custom formatting is applied.
Excel 2007 :: Average Of Set Range - Display Blank If Cell Contains 0
Mar 13, 2013I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
Can't Use Index With If Formula
Jan 13, 2014I have the following data and i want to get the highest value over average using if, i wort this formula
=IF(INDEX(D3:D12,ROWS(D3:D3)>AVERAGE(D3:D12),"Greater","Lower"),
But it doesn't work.
Index Formula : How To?
Jan 10, 2008The first sheet is called Sites and the second sheet is called Call Log-Jan-08
On the Call Log in cell A3 we put the division # and then we want the information to automatically fill out for the cells B3, C3 & D3. We want this information to come from the Sites list. In the sites list the information starts in A2 thru K2 (A1 thru K1 is the header info) and goes thru A645 thru K645.
I can't figure out how to get my Index formula to work.
Index Formula ..
Feb 18, 2010in B2 want to have value of cell T1
in B6 want to have value of cell T2
in B11 want to have value of cell T3
in B16 want to have value of cell T4 etc etc..
so actually in every 4th cell in B row need to have formula which will show data from T row as in example above!