I am attempting to show a User Form during the forms Initialize code. I Load the form after extracting data from a SQL Server database. The code that Loads the form is returned to after the form closes. The problem is that when I run through the Initialize code where criteria decides whether the form is actually shown to the user. If the criteria is not met there are no issue, but if the criteria is met, then the form is opened and the rest of the Initialize code is not stepped through. As there are many If Then and a Select Case and a couple With...'s I need the rest of the Initialized code to be stepped through so after the form is closed by the user and the original code which Loaded the form is returned to I do not get an error.
Oh and the big problem is that I am not getting an error message during this, the Load code is actually repeated because when the original code is actually returned to is returned on the Load UserForm code.
Private Sub UserForm_Initialize()
Dim i As Integer, Endofdata As Integer, wsheet3 As Worksheet, wbBook As Workbook
Dim wsSheet As Worksheet, c As Variant, gTotal As Long, Score As String, g3000 As Long
Dim gTotalAdd As Integer
On Error Goto ErrorHandler:
Application. ScreenUpdating = False
'cmbIDCountry.ColumnCount = 2
Set wbBook = ThisWorkbook
Set wsheet3 = wbBook.Worksheets("UpdateDetails")
Set wsSheet = wbBook.Worksheets("Data") ....................
I have an Access program that acts as a dashboard to open Excel reports. One of the Excel workbooks opens a form in the Auto_Open routine. My problem is that control is never passed back to access after the form opens. It appears that the code stops executing until the userform is closed. How can I open the excel workbook, show the Excel userform, and continue processing my Access code?
Set XL = Excel.Application With XL .Workbooks.Open FileName:=FileName, ReadOnly:=True . ActiveWorkbook.RunAutoMacros xlAutoOpen End With XL.Visible = True
' Excel Code Sub Auto_Open() Unload UserForm1 UserForm1.Show ' The code get "stuck" right here End Sub
I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
My code below works great all the way to the end. When the last message box comes up, If the user chooses Yes. I want them to be directed to the sheet "C123". But currently it just stays on the sheet that I named "Home".
What am I missing here?
Private Sub CommandButton1_Click()
Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("Log")
'find first empty row in database iRow = ws.Cells(Rows.Count, 1) _ .End(xlUp).Offset(1, 0).Row
'check for a Reason Code If Trim(Me.ComboBox2.Value) = "" Then Me.ComboBox2.SetFocus MsgBox "Please enter a reason code and ensure that date is correct!" Exit Sub End If
I have 3 Work books - one (WB1) checks its version number against an online record and if they dont match it opens WB2 which then proceeds to download the updated version copy information from WB1 to its self which it then pastes into WB3
WB1 then gets deleted and WB3 Renamed to the old name of WB1
the issue i have is when i open WB2 using the button that also checks for updates on WB1.
WB2's code seems to just stop when it gets to the point of updating WB3 no error messages or nothing it just stops!
I am using Excel 2003 work PC, and when i run this simple code it stops during the loop, I have had this problem a bit its like something is hitting the esc key or ctrl - break. But no keys are being hit or are sticking.
I have closed Excel and created new work book pasted the code in but it still stops at r = r - 1, haven't done a restart yet.
Sub Macro2() Dim r As Integer r = 10 Do Until r = 0 ActiveCell.Value = ("Shut down in " & r) Application.Wait Now + TimeValue("0:00:01") r = r - 1 Loop Application.Quit End Sub
I have 2 forms (A and B). Form B is initialized with values from a global array created in form A. When closing the B form it's still visible. I want it to dissapear.
The B form is opened from the A form
Private Sub cmd_ok_Click() frm_B.Show End Sub
When closing the B form it's still visible (modal)
'Within form B Private Sub cmd_cancel_Click() Unload Me End Sub
I'm using Excel 2007 and my s/s is 360000 rows deep. To cut+paste formulas+formats from one column to another I'm using the following Sub move_formula_and_formats_from_I_to_L()
Dim cell As Range
Application.ScreenUpdating = False
For Each cell In Range("I1", Cells(Rows.Count, "I").End(xlUp)) With cell If .HasFormula And Not .Offset(1).HasFormula Then .Cut Destination:=.Offset(1, 3) End If End With Next cell
Application.ScreenUpdating = True
End Sub The code stops working after 159000 rows and highlights (in yellow) the line: .Cut Destination:=.Offset(1, 3)
I have a before print event that shows a userform - the user can then select which worksheets they want printed and select a command button. I then have a loop set up that loops through the selected workbooks and prints them. The problem is I am not sure how to tell VBA to print without it going back to the Before Print event userform.
I created a Userform on top of an excel files. The userform uses data contained in the excel file. When my users open this file, I would like them to only see the userform and not the excel file in the background. I have tried the following but it prevents the userform from working.
Private Sub Workbook_Open() ThisWorkbook.Windows(1).Visible = False UserForm1.Show End Sub
Private Sub Workbook_Open() Application.Visible = False UserForm1.Show End Sub
I usually just use macros to clean up Data from non-excel sources. So I wrote a macro to do this, but the process requires a date to be added, so attempted to do this via an input box. The input box works, but the code doesn't, clicking the button to which the macro is bound spits out an error 91 (object out of bounds?) when it hits the search function right after the inputbox code. Both bits work as intended separately, so I guess it's just some moronic formatting error on my behalf.
The background is there are about 40 people who use a Excel based program that contains a pivot and a bunch of other tools that they use on a regular basis, this set of tools has a version number. In this excel workbook, it has a function that looks on the network drive that we have and checks the local version vs the version on our network drive, if its wrong, then the user gets a popup stating your tools are out of date, would you like to update, then they click yes and I have these lines of code
Public Function GetNewTools() Dim MyFullName As String
'Turn off alerts Application.DisplayAlerts = False
'Open the new version of tools Workbooks.Open Filename:= _ "Network DriveUpdate.xlsm"
End Function
The update file has this code that executes on fileopen in the thisworkbook section by calling the following sub
The main issue we're running into is near the very end, the code never makes it to "TEST 2". After the first workbooks close, the code just stops running. No crashes, errors, freezes, anything. It just stops running and never makes it to the second msg box.
I have a Userform that allows a user to select a year eg (2007) from a listbox called yearbox where Yearbox.Value = AddYear. When the user Presses 'OK' the following code runs: ...
I have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
I have code to open another workbook and run a specific macro. I plan to then take that and copy it over to my workbook.
The problem I am encountering is when I run this macro, at the end of the code, a form/msg pops up stating it is complete. This then automatically stops my code from running (from my original workbook). How do I close this form in order to keep my code running?
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize() Me.MultiPage1.Value = 0 TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value Dim hWndForm As Long Dim hMenu As Long hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000 hMenu = GetSystemMenu(hWndForm, 0) DeleteMenu hMenu, SC_CLOSE, 0& End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.
I am finishing a travel per diem form and I want to implement a user form where the current rates could be entered by the user and update specific cells used as my drop down list values. I have made the form and a box that activates it. I just can't write the code to place the inputted data from the form into specific cells on a sheet so the list boxes will have the current rates to choose from. I can only find information to have the data populate the next blank row of a table.
Is it possible to build a simple input dialog box with only code? I'd really like to avoid having a userform permanently in the project.
Ideally it would either display and be dismissed with code only, or be constructed as a real userform, displayed and dismissed, then deleted from the project afterwards.
I am aware of excel's built-in input dialog box, but I'd really like to get away from it's awkward keyboard functionality if it's somehow possible to do. Although that would be ideal if there were some way to make the textbox's behavior to the Home, End, Tab and arrow keys more like that of a normal textbox, but I am unaware of any such options.
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
I'm a rookie with combo boxes. This is my first one.
I need a pull-down list on a form that has the integers 1 to 40. Seems simple enough, but how do I add the integers to the combo box? I don't see a property to define the list.
I have the integers on a sheet called locked and the range is Y3:Y42 if that is required.
Also, I want the default value for the combo box to be 12 if that is possible.
The form is called frmNewData and the combo box is called cboAWG
Trying to write a UDF Code for a User Form. The User puts in the data for the element it is trying to find the pressure in mm Hg for.
I want a Msg Box to appear when the desired temperature is less than the lower limit temp. and the desired temp is greater than the upper limit temp.
I figured out how to get the message box to appear, but I have not figured how to get the If statement to continue with the calculation if the desired temp is within range. When I press the command button to calculate, the message box appears whether the temp is in range or not.
My code is as follows:
Private Sub CommandButton1_Click() Dim A As Double Dim B As Double Dim C As Double Dim Pvapor As Double
In a Userform, is there a way to run code that's listed under another UserForm event subroutine?
Example:
I have a Listbox and several Labels. When I click on a selection in the listbox, it populates the labels with various data from a spreadsheet. This code is in a "list_AfterUpdate()" subroutine.
If I change a piece of data and click a CommandButton1, I would like the labels to automatically update.
The only way I can think to do that (at present) is to run the code listed in the "list_AfterUpdate()" subroutine.
Is there a way to run that code without duplicating it in the "CommandButton1_Click" subroutine?
way to allow a user to add a control to a userform without going into the VBE. Here is the situation, I am developing a userform to calculate a projected budget. I want the user to be able to select the number of controls to add, and click a command button to add them. Based on other selections that the user makes, different controls would automatically be added. Is this possible? As a follow up, will I be able to atttach code to these new controls?
