Organizing A List
Jun 8, 2006
I have attached a file that I need a little guidance on. The list of information on the left needs to be organized and put in the appropriate tables on the right. Each row represents one person and I need to know how many people from the list fall into each category. For example: The first row has a gender of "1" and the age is "46" and the status is "1". Therefore, this person falls into the category associated with "K11", I filled it in already. My list will vary in length from 20 rows to 20,000. I am not sure how to go about this and have been frustrated by failed attempts.
View 6 Replies
ADVERTISEMENT
Oct 15, 2008
I make our employee schedule at work, and so in Excel I have eight sheets for one workbook. (Employee schedule, then each day of the week) On each day is a table separating the shifts. Morning, Split and Night.
I was wondering if there was a way for Excel to look at the schedule sheet, and then automatically place each employee and their shift on the following day sheets. (example: Joe has 2-10 on Monday, 10-6 on Thursday and Friday) So the Excel puts Joe underneath Split 2-10 for Monday, and Morning 10-6 on Thursday and Friday.
View 10 Replies
View Related
Jun 27, 2013
I'm looking for a opinion on what might be the best way to organize some data for sorting later.
I work for a company and we have a lot of equipment. I have a spreadsheet with each piece of equipment in a row. Column A has the equipment name with all the following columns having info about the equipment. One example would be voltage, some equipment runs at 120v and some runs at 208v, some runs either or and some runs at other odd ball voltages, although this is rare. I am trying to determine what the best way to enter data like this would be. Would I be better off entering one column labeled voltage and filling in the voltage, but this becomes problematic when a piece of equipment can run multiple voltages. The other though is to do multiple columns, one labeled 120v, one 208v, one 480v or whatever and go from there. Than put a "X" or Yes or something in the columns that apply.
I have this same scenario for multiple variables like connectors, hardware accessories and things like that. I am trying to think this through before entering all my data of what could be the negative effects of this.
Would it be possible/make sense to do a radio box?
My end result is hopefully to be able to say I want a piece of equipment that meets multiple scenarios like runs 120v, this accessory and this connector. Ideally setting up some sort of easy sort method in my column headers.
View 2 Replies
View Related
Nov 26, 2013
I have a spreadsheet converted from pdf having more than 30 Columns .for Example( name, address, tel. website , products etc).
Problem is that data is not consistent in all columns.Some have full range(all 30+ columns having data) and in some not( only some columns having data )
I want to organize data as per headers and leave cell blanks or fill in (N/A) where data is not available for that field. How can I correctly populate it.I need data as per headers in rows.
Here i am dealing with 2k rows with 30+ columns.
View 3 Replies
View Related
Nov 16, 2011
I have a list of 35k files and the number of files keep changing every week. At the end of the month I manually have to sort the files i.e move files to the respective folders, delete them or take no action. This takes me an entire day. There are useless files which needs to be deleted.
Si NoFile nameFile PathNew PathAction
1Store C:Jay PersonalDesktopRXProjectSix SigmaStore.xlsC:Jay PersonalDesktopNewProjectSix SigmaMove
2AppointmentC:Jay PersonalTeam QualityAppointment.pptC:Jay PersonalTeam QualityAppointment.pptDo Nothing
3QualityC:Jay PersonalDesktopRXProjectSix SigmaQuality.docDelete
The format is as follows. File name is the file which I intend to move, File path is the current file path, New path is the path where I want the file to be moved, Action (Move, Do nothing, Delete) is the action i intend to take on the file.
View 3 Replies
View Related
Jul 11, 2014
I'm setting up a type of form in excel where I have some validated drop down lists and I'm trying to use a macro that will, upon a button click, take the data from the drop down lists that are entered into the boxes, and organize them into a chart on a different sheet of the document. This would be the form with some drop down lists.
Juice Type
Apple
Juice Size
8 oz.
Juice Buyer
Ronald
I want to add it in to a table with every button click filling in a new row in a table like this,
Juice Type
Juice Size
Juice Buyer
Apple
8 oz.
Ronald
View 3 Replies
View Related
Apr 19, 2007
Is there a way to sort the worksheets in a workbook after they have already been entered. My clerk put 200+ worksheets in one workbook....out of order.
View 7 Replies
View Related
Sep 11, 2013
I have a question on how to organize cells from lead sheets that I load inside excel, when it loads it shows as is:
Name, Last, Address, City, State, Zip, Phone #
I need it to be organized so when I print they read:
Name
Address
City, State
Phone#
Instead Of them All together in a landscape view.
View 1 Replies
View Related
Dec 31, 2011
I'm looking for a formula that would arrange the numbers from column K into the sum table, according to their sum total from column L, the formula should begging in cell P3 to maybe T3 and down to T30 I suppose ?
KLMNOPQRSTU1NumberSum Sum Table 2
30235 0 40246 1 50279 2 602810 3 702911 4 80347 5 023 903710 6 024 1003811 7 034
1103912 8 1204711 9 027234 1304812 10 028037 1404913 11 029038047 1507815 12 039048237 1607916 13
049238247 1708917 14 239248347 182349 15 078249348 1923712 16 079349 2023813 17 089278 2123914 18 279
2224713 19 289478 2324814 20 479 2424915 21 2527817 22 2627918 23 2728919 24 789 2834714 25
2934815 26 3034916 27 3147819 3247920 3378924 34
View 9 Replies
View Related
May 13, 2014
I am in process of making an appraisal system for my organization through excel templates .Each employee will Have 2 KRA templates .One specific to their roles and other in the area of their interest.
So while rating i will select role of the person and his interest area.Then the comprehensive template integrating both templates should be generated from the master templates which are in place.If i make any edits in Integrated template,it should not be reflected in master templates
View 2 Replies
View Related
Jan 31, 2014
I have a bar chart that monitors month over month activity. I use Layout 5, which allows for the numbers data to neatly be organized in a table below the bar chart. However, i recently started using the data on a secondary axis to accurately reflect trend lines. It works great, but now the data table below displays redundant information. see attachment.
example.jpg
I just want that data in the data table to be displayed once, completely leaving of the axis legend.
View 2 Replies
View Related
Jan 31, 2009
I'm a novice in VB and can't work out how to solve the following problem:
I have imported NMEA-data in text format from a GPS into Excel. This data is acquired in real-time at 10Hz, which borders what the GPS in capable of calculating. As a result the data isn't quite reliable enough - there are strings missing and some lines have been skipped by the GPS. This is a typical example of what sometimes happens: ...
View 15 Replies
View Related
May 13, 2009
Sub SplitOut()
Dim DataSH As Worksheet, OutSH As Worksheet
Set DataSH = Sheets("Input")
DataSH.Activate
lastrow = Cells(Rows.Count, "D").End(xlUp).Row
For Each ce In Range("D2:D" & lastrow)
Application.StatusBar = "Actioning " & ce.Row & " of " & lastrow.............
I am working on this spreadsheet that has a lot of information that will only get bigger as time goes on. I would like to organize the contents of one column into separate spreadsheets. So if I have "stacking" in one cell of that column, the whole row associated with that cell will go to a new spreadsheet labeled "stacking".
I have attached the sheet. I would like column D (Type_Code) to be organized by the words in that column. So I would have 5 or so worksheets labeled stacking, cartoner, wheel, inspection, etc. The data here is input by a machine.
View 3 Replies
View Related
Mar 30, 2009
I want to manipulate team statistics and having a bit of trouble trying to figure out how to do it. I am relatively new to excel and am using Excel 2007.
I have attached the excel file for your reference (the same file).
What I need to do is first find out the team number using the table on first sheet named "Teams". User will enter team name on call B4 of sheet "Team entry" then in cell C4 there should be a formula to find the team number (is beside name on sheet "Teams) and displays it (on C4). Then on cell D4 of the same sheet "Team entry" there should be a formula that displays cell A1 (shows a statistic for that team) of the team sheet. Each team has its own stat sheet named by its team number (easier for me to keep track). So basically D4 should show cell A1 of the sheet that shows stats of the team entered. In addition cell E4 of "Team entry" should display stat2 (of the sheet "stat2")for the team entered.
View 2 Replies
View Related
Jan 12, 2014
how I can list 3 different values to a list of list of 3 in a combo box, is.
combo box
select high = 35
select middle 30
select low = 25
I have the names in the box I just need it to add a value (which I have listed 1 in each separate cells) to each selection
View 9 Replies
View Related
Apr 18, 2013
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
View 1 Replies
View Related
May 19, 2014
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies
View Related
Jun 20, 2008
I can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies
View Related
Mar 8, 2012
I'm using Excel 2010 on a Windows 7 machine.
I have one sheet with a large list of dates and total prices.
I have a second sheet with a list of dates and unit prices.
I want to divide the total price in my first list by the unit price on my second list.
I want to somehow point Excel to the date in the first list, and then lookup the corresponding date in the second list to use the correct unit price.
My thoughts thus far have been along using VLOOKUP with WEEKNUM and YEAR but I've been unsuccessful.
View 2 Replies
View Related
Jan 28, 2007
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies
View Related
Jun 15, 2007
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
View 4 Replies
View Related
May 17, 2013
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies
View Related
Apr 11, 2014
It is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
View 8 Replies
View Related
Jan 20, 2014
I need to consolidate these two lists of data into one list.
First set is just a basic list of individuals with their data.
Second set is multiple entries for those same individuals. Each entry shows a subscription to a programme. The final single sheet should have one row per individual which shows all of the programmes they are subscribed to.
See attached, example sheet.
The real list is 3000 IDs, so need some kind of formula to do this.
View 4 Replies
View Related
Feb 14, 2014
I have a list in column L2:L352. I would like to be able to start at AD2 and drag horizontally so that AD2 = L2, AE2 = <BLANK>, AF2 = <BLANK>, AG2 = L3, AH2 = <BLANK>, AI2 = <BLANK>, AJ2 = L4, etc.... until L352 has been autofilled.
View 2 Replies
View Related
Mar 27, 2014
I have a large amount of data, 40,000+ rows about how students do in remedial classes including from whom they took the classes. I have pulled from it a subset of student success as relates to the separate instructors. Now I would like to extract a consolidated list of those instructors for whom the student gain on criterion based pre and post course assessments is above a specific level. I have no trouble writing if statements that will look at two types of data, the course taken and the average student increase to determine which instructors meet or surpass the criterion, but I can only do that within a list that includes all the instructors. Because there are more than an hundred such instructors, it would be easier for the dean if I could provide a short list of those that meet specific criteria. I believe that it would be an array that I should use, but I have been fooling around with this for 2 days now, and am finding myself at a series of deadends!
View 5 Replies
View Related
Jun 24, 2009
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
View 8 Replies
View Related
Feb 8, 2013
I'm currently working with 3 dropdown lists depending on each other using data validation and =indirect(). I arranged them like in a top-down approach where you have a mother-list and child-lists (categories-->subCategories-->subCategoryCriteria). The user should easily chose first a category then a subCategory etc... This part works perfectly
My question is: when a user chose in the dropdown list e.g. a category, a subCategory and a subCategoryCriteria and he now maually deletes the value in the highest level, which is the Category (mother-list), all sub level values like subCategory and subCategoryCriteria will stay. It shouldn't be that way, because it's not logical. If you turn a tree upside-down (top-down approach) and cut one of the higher positioned trunks, all lower positioned trunks will fall off as well, right? So, my question is: can I use a conditional formatting or a formula to delete or fade out the value in the lower lists when the higher list value is being deleted?
I tried to use If-formula in combination with indirect in data validation, like =IF(A1="";("");INDIRECT(B1))...just and example.
The value doesnt need to be deleted, it could also be automatically face out like white on white or something. It's just confusing for the user if he deletes the highest choice and the lower choices still stay.
View 8 Replies
View Related
Jun 11, 2013
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
View 7 Replies
View Related
Nov 21, 2013
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies
View Related
