The following code displays the message box and loads a userform if the Active cell offset 1, -1 when within G column equals "LAST ROW".
[Code] .....
How can I change it so instead it performs those same actions (displaying the message box, and loads the userform) if the number of rows between the last data entry in G and the last data entry in F is equal to 0?
I use a userform to make sales data entries into a database. The userform contains textboxes for:
Invoice No.Invoice DateGrossVatNet The Invoice No. is the first entry box on the userform and it is important that users enter the correct format (which is alphanumeric).
It is also important that a checking is carried out to ensure that the Invoice Number being entered has not already been used.
I use the following code to ensure that the numbers are entered in the desired format:
Code:
Private Sub txtInv_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If txtInv.Value = vbNullString Then Exit Sub
If (Not UCase(Me.txtInv.Value) Like "ST###") And (Not UCase(Me.txtInv.Value) Like "ST####") Then
MsgBox "Non Valid Invoice Number.”
Cancel = True
End If
End Sub
And this code is pasted lower down the VB editor window. And it seems to be working fine!
For the checking to ensure that the invoice number being typed into the textbox has not already been used, I use the following two codes combined together:
a) to check for invoice No.:
Code:
check for Invoice Number
If Trim(Me.txtInv.Value) = "" Then
Me.txtInv.SetFocus
MsgBox "Please Enter Invoice No."
Exit Sub
End If
b) And to it I add the following additional code for CHECKING that the no. does not already exist in the database (the invoice nos are located in Column A of the database):
Code:
Dim x
X= Application.Match(Me.txtInv.Value, Columns(1),0)
If Not IsError(x) Then
MsgBox Me.txtInv.Value & "Invoice Number Is Already Used"
Me.txtInv.SetFocus
Cancel = True
Exit Sub
End If
My problem with the second set of codes in (a) & (b) (for the Checking of already existing No.) is that the code allows the user to key in the Invoice No. and go through filling in the other textboxes. It is only after clicking the ‘Add’ button that a msgbox comes up to indicate that the ‘invoice no. is already used’.
I need a tweaking of the codes so that the moment an invoice no. that has already been used is typed into the textbox and the TAB button pressed, a msgbox will show up at that stage to indicate that the ‘Invoice no. is already used’. This will reduce time and avoid filling in the other textboxes and clicking the ‘Add’ button before the checking is done.
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI need a vba code to run a macro when a specific word entered in a cell. i.e. when a word "Duplicate" entered in a cell O2, the macro run automatically.
View 1 Replies View RelatedI have a macro that is intdended to run after the user has selected a cell in column A:A (any position except A1)
Once the user has selected their desired cell, they press a button and the macro runs.
Occasionally a user will press the button without selecting a cell in the proper column.
I would like a message box to pop up to tell the user "Please select an account in Column A" and bump the cursor (active cell) to A2 so at least it's in the right column to help get them started.
Sheet 1 holds aprox 30,000 lines of data, each line of data has values populated in columns A:P
Each row in column A holds a unique number (displayed as TEXT) made up of ddmmyy plus number in two digits, for exampls 18011209
how using code I can check each number through column A for duplicates and delete that particular row of data when found
So let's say I have a table like this:
Apple
Banana
Cherry
Banana
Durian
And when I tick one row:
Apple
Banana
Cherry
Banana
✓
Durian
The rest of rows of same values will also be ticked:
Apple
Banana
✓
Cherry
Banana
✓
Durian
I would like to have the macro/VBA for this.
This question was also posted at:
ExcelForum: [URL]...
MrExcel: [URL]....
I'm writing a function that sums the values in a range of cells but some are errors due to my formula's. any way i can check if a value is a number in VBA?
View 2 Replies View Related1) check if in cell A1 there is a number. Something like
If .Cells(1,1).Value is number then ....
2) how to get the "code" of cell A1 in VBA (i.e =code(A1)).I tried
.Cell(1,1).Code
but it didn't work.
I have a cell built into my spreadsheet that serves as an error check (i.e. returns the word 'ERROR' if certain criteria are fulfilled on the spreadsheet). I'm trying to write something into a Macro that will check this cell and not allow it to run if it states ERROR, returning a dialog box to notify this, is this possible?
View 2 Replies View RelatedThe loop is putting the correct formula into the cell - but THEN... - I wish to (within the loop and before it moves on) check if the value is equal to OR greater than 1 - if it is, make it a value of 1 (this '1' is then used at the bottom of the column of data to give a total). I need to do this before it moves onto the next cell. What am I doing wrong? Is it because once it puts formula in the cell, it then moves down - do I need to select the cell again first? As I had originally posted on this site - link: url]http://www.excelforum.com/showthread.php?t=641970[/url]
View 2 Replies View RelatedIn need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.
View 2 Replies View RelatedI have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
View 7 Replies View RelatedI am trying to create an input sheet with a specified number of rows. My plan was to hide all the empty rows in the table and ask how many rows were required in the table. A button would then be pressed to unhide all the relevant rows thus giving a table of the correct size. My best effort so far looks something like this:
Sub UnhideRows()
Dim i As Integer
Dim myRow As Integer
myRow = Range("A1") + 2
Application. ScreenUpdating = False
For i = Selection.Rows.Count To 1 Step -1
If WorksheetFunction. Sum(Selection.Rows(i)) > myRow Then
Selection.Rows(i).EntireRow.Hidden = True
End If
Next i
Application.ScreenUpdating = True
End Sub
the cell to give the size of the table is A1 and the table starts in A3. The first cell in each row has an index number (=row() - 2), all other cells would be empty to begin with. My attempt did not work.
a1=aaa
a2=111
a3=222
a4=333
a5=bbb
a6=444
a7=555
a8=ccc
a9=909
a10=234
if a1 = aaa then copy a1 to b1 until the cell =bbb
if a5= bbb then copy a5 to c1 until the cell =ccc
if a8= ccc then copy a8 to d1 until the cell = ddd.........
I am attempting to build a mileage tracker based on a master list of code numbers. After submitting the date in cell A, in the next cell, B, I would type a code number from the list, say 7. Seven is the massage parlor that is 15 miles away. So 15 would come up in the next cell C.
View 3 Replies View RelatedI wrote the following basic code earlier (which will end up being part of a larger code)
Code:
Dim DateInput As String
Dim LastCell As String
Sub LastRowInputBox()
LastCell = InputBox("What is the last row number in the range?", "Last Row Input")
[Code] ......
As you can see, all the ColumnCopyInsert Subroutine does is copy select/copy four columns (E:H), inserts the copied selection immediately to the right, inserts formulas and autofills down to the last row required. I added the LastRowInputBox routine as the range of rows varies from week to week (inserting new rows, deleting others).
The code works great...up to a point unfortunately. If ran as it is, everything that should be copied/pasted will be and cells autofilled to the row specified via the InputBox. Here comes the problem, if any rows are either inserted or deleted then the code throws out "The object invoked has disconnected from its clients" when it reaches the first instance of the following line:
Code:
Selection.Insert Shift:=xlToRight
At which point, Excel hangs (or maybe in some sort of loop) and I have to open Device Manager and close the Excel exe process.
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
View 8 Replies View RelatedLooking forward VBA coding for:
If input is entered into column C (range C2:C100), then row cells for columns D, E ,F, H or I must NOT be blank upon save.
Could be that one or more of these row cells are left blank by mistake.
An error msg pops up upon attempting to save, stops the save and colors each cell yellow that needs info entered into.
Using Excel 2010.
I have test file so i want to program when i click on button, it will check every 10s on Heet2.cell(i,4) until that cell has value (take by hand) then check next cell (Cell(i+1),4). I used timer code (pls view code on test.xls file) but it not work properly.
[URL]
How can I check if a cell has data validation with a VBA procedure?
I want to do this because I am using a procedure to add data validation and I get an error if the cell already contains data validation.
I have several files of data that are from a data logger. The data is broken up by day. Each day has roughly 43000 rows of data, at its sample rate. This has made charting the data a nuisance. Is there a way to resample the data so it fits in the 32000 points excel can chart? In the future I will set a sample rate that will keep the number of points below the 32K per series. I would like to be able to have the total number of points reduced by averaging the data not by simply deleting one of every four rows.
View 5 Replies View RelatedThis vba code will delete all the rows which have data in. At present it starts on A2 (so doesnt delete anything above A2. Which part of the code in red would I need to change for it to be A3 and which would I need to change for it to be B3.
View 5 Replies View RelatedIn my macro, I need code that will select all the rows that contain data in a given column, minus the first row which has a header.
View 6 Replies View Relatedi have a large table, columns A:F, would like a code which would look at the text in column F and create a new row for each bit of text separated by comma
probably easier to show what i mean, here is a section of the table, in this example store 13121 needs multiple rows.
start with this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th { background-color: #104E8B;
[code] ......
and turn it into this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th {
[Code] .....
VB code to carry out the following task?
Look at name in cell BC2, check the name in cell BA2 and if is the same delete the name in BA2 and BC2.
If is different then leave both cells as they are and move onto checking BC3 against BA3
carry this loop thru BC2 : BC40
a code that will delete blank rows between data, below is sample of my data, the header row is 8
From this ....
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)