I have data from another worksheet that has up to 400 rows, containing duplicate data. The new sheet only needs 200 of the same rows with out the duplicates. how can i select every other row in a column to delete it.
View 9 RepliesI am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View RelatedI am trying to select something in VBA code in the Messages part of the ribbon and then Email Tags section of the outlook ribbon called Choose classification but not sure how to select this object. It is only available when you send a new email. I have been unable to paste a picture which would explain it better.
View 9 Replies View RelatedI have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
find a row containing text. Like when opening a PDF file with Excel, all the pdf code is in column A. I would like to create a formula that would search column A for the text "Example" and have the row number be the result.
I've tried using index, match, find, search, etc.. and nothing seems to work.
I got 2 columns A and B, I need to find if the cells in colume B are in cloumn A and do some copy pasting. But sometimes when it cant be find in column A, then VBA shows an error message. What I want is if it cant be find in column A, then skip it and go to the next cell of B and find it in A again. I think it can be done with On error resume next, On error goto 0, but i cant make it work.
View 2 Replies View Relatedget a cell to return a value depending on whether or not a cloumn is populated
for example. If i Have 3 columns EUR, GBP and CHF and there can (99% of the time) only be one entry in any of the 3 on any given row. How then can i get a 4th column to return the value EUR, GBP or CHF on the same row as an entry. I have a relatively complicate nested IF fromula but i think this is slowing down the worksheet as there are 500 or so rows containing it. Ive attached an example segment
Excel Userform
VB:
'enables user to click [U]highlight and select[/U] an item in ListBox1 and ListBox2 item (same row in index) is also [U]highlighted[/U] (highlighted only not selected)
Private Sub ListBox1_Click()
ListBox2.ListIndex = ListBox1.ListIndex
End Sub
Question: Is it also possible to enable a user to click to select an item in ListBox1 and ListBox2 item is also selected simultaneously (same row in index). Is there excel vb code to do this?
I think the code may be along the lines of the ListBox SelectedIndex property. What would be the Excel VB code equivilant for the ListBox SelectedIndex property, if so?
numberdesc
1_______yellow
1_______yellow
1_______blue
2_______purple
2_______purple
3_______green
3_______orange
4_______black
I need some way that can identify when the item in the description column doesnt match the first item of the same number- for example, here the 1-blue and 3-orange would be flagged because they should match the 1-yellow and 3-green.
I need to do this on a much larger scale (approximately 20,000 data points), so I wanted to create a formula or macro that could do this for me.. I thought making a reference page with would work but I keep getting an error.. I haven't done VBA in a while, so I may have syntax errors.
If Range("A2:A9").Sheets("Sheet1") = Range("A2:A6").Sheets("Ref") And Range("B2:B9").Sheets("Sheet1") = Range("B2:B6").Sheets("Ref") Then
Range("C2:C9").Sheets("Sheet1") = "x"
End If
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I am using a vlookup and have a problem. I am assigning a category to an item number based on the first two characters of the item number. For example item number 60123 would equal scrap because of the first two characters of 60. But the item number can begin with either a number or letter. Here is the formula I am using that works for item numbers that begin with numbers:
=VLOOKUP(VALUE(LEFT(E2,2)),Sheet3!A:B,2,FALSE)
It works fine until I reach a item number that begins with a letter, then I get the dreaded #Value error. If I take the value out of the formula then it works for the letter based number items but not for the number based item numbers.
Here I would like to get your valued guidance for the usage of "IF" formula. I am having two sheets one is new XL-1 and other is old XL-2. I want to have a item number from the old file corresponding to the same item descprition in the new file. I am attaching the snap shots of two files which is more explanatory than describing in words here.
View 2 Replies View RelatedI am using Vlookup to compare our item number with the suppliers item number but the result is removing the decimal point on some but not all items.I have included a small sample but it concerns almost 10.000 items.
View 9 Replies View Relatedhow I can, in a formulae, identify the last item(s) in a list of values. For example I have data in rows 1-25 with numeric data in. I want to put a formula in, say, row 100 that averages the last three data items above in the same column, but the number of data items will increase over time to use row 26, 27, etc. and I don't want to change the formula in row 100.
View 4 Replies View RelatedI am trying to find the std dev for each items below. I have tried to look for online tutorials but all tutorials I have seen only teach me to do a std dev for 1 set of item.
ItemQuantityC3C4D4A4B4A4B4C4C4B4B4A5D5C5D6B6C6D6B6A6D6A6D6B6C6D6C6D6D10B10A10B10C10D10A10D10A10C10C10D10B10
I have problem with filter more than 10,000 different item using Excel 2010, any other way to filter?
View 3 Replies View RelatedI need a macro to add the last 2 items in column G, if they are both positive or negative. If one of the values is either positive or negative, then they must be subtracted.
In the example below the formula in G45 = G43+G44
The data is imported so the range will allways change foe rg G45 must become G75, then the formula will be G73+G74 if they are either both postive or negative or if either one is positive and the other is negative then G73-G74 ....
I need to sum every third item in cloumn B begiinining with b2, B5, B8 etc. Is there a formula that I can use to calculate every third row
View 9 Replies View RelatedI have a combo box(form control) and have it populated with data.
I want each item to do something so that when one is selected it triggers and event.
the items are:
Rounds 1 - 5
Rounds 6 - 10
Rounds 11 - 15...just like that all the way to 30
the worksheets are labeled "Rd 1", "Rd 2", "Rd 3" ...etc
When I click "Rounds 1 - 5" in the combo box, besides the "Summary" worksheet (which is where the combo box resides) only "Rd 1 - Rd 5" should be visible, I want all other sheets hidden, and when I click "Rounds 6 - 10" I want "Rd 6 - Rd 10" visible and all else hidden.
how I can match an item in a row with another row?
I have a row of data A2:J2. A persons name could be in any column in that row.
I have another two rows of data where the peoples name and department name appear Where L2:L7 = peoples names
where M2:M7 = peoples department
I want to match a name in A2:J2 with one in L2:L7 and if matched put the department name in K2. Then obiviously i will copy the formular down column K.
I have a list in column B starting in B11.
The list can have one or many items in it, and will not have blank cells between any populated cells.
Is there a way in Excel to determine the last item in the column without using VBA?
I am trying to add up the same item until it changes. I have attached the file with the desired outcome in the 2nd column.
View 1 Replies View RelatedI have a list that kind of looks like this. I sorted it by date, then by location, and then by time. I need to find the earliest item in one location on a given day and display as a list.
datelocationtime
6/1/2013 A730
6/1/2013 A745
6/1/2013 A750
6/1/2013 B800
6/1/2013 B810
6/1/2013 C730
6/1/2013 C745
6/1/2013 C800
6/1/2013 C815
6/2/2013 A730
6/2/2013 A745
6/2/2013 A800
6/2/2013 A815
6/2/2013 B700
6/2/2013 B800
6/2/2013 B815
6/2/2013 C800
6/2/2013 C815
When copying the formula =SUMIFS(G3:G103,I3:I103,"3") how do I modify it so that only the "3" rolls to the next integer and the rest of the formula remains constant? In other words the 3 would roll to a 4 when copied down a column and the rest of the formula does not change?
View 4 Replies View RelatedI have a table, which has pairs, e.g like this:
A=1
B=2
etc
how to give the value to variable based on this pairs? I mean something like this:
If left(mystring;1)=A, then
myvar=1
I used the case-structure, but maybe there is a better solution, which can use an array in order not to write all of the items whenever I need it.
I have a userform that allows users to choose their name (cboName) and an item (cboItem) from comboboxes.
Now, 2 specific items can only be selected from certain people
Lets say there's ItemA, ItemB and ItemC, and the people are named Joe, Bob and John
Now, only Bob and Joe can select ItemA or ItemC. How do I formulate If statements that prevent John from selecting ItemA or ItemC? Something like:
[Code]....
I've created a dropdown list using "Data Validation" containing 5 items.
Each item in dropdown should run a macro when selected.
Should i use worksheet selection change event? or anything else.
how can i do the following:
command text that is written in textbox to appear in cell,
and the next text that is written in the cell below the previous cell?
What code do I use?
Textbox_tekst
cell A4
cell A5 and so on
My question is about removing items from a ComboBox. I've created a ComboBox with an array of items as follows:
View 2 Replies View RelatedI have the attached workbook. I have one sheet (materials) using Vlookup onto a second sheet (price list). If I put in a qty against 2 or more items with the same part code on the price list only the first item is displayed. It does get shown multiple times.
I need to try and get all items displayed, even if the part code is the same.