I have a worksheet where the first two cells in the header are blank but the third and last cell is not. I'm trying to find the code which would give me the last populated cell in the header.
View 2 RepliesBasically i have a manpower chart with months along the top and names down the far left. People are going to start work in different months so i want to know at the side of each persons name the month they start. Heres a simple example
I have column headers starting at B1 thru F1, with the following values Month1,Month2,Month3,Month4,Month5
In cell D2 i have the value 1
I want Cell A2 to return the value Month3
Whats the formula i need to input in A2
i have a manpower chart with months along the top and names down the far left. People are going to start work in different months so i want to know at the side of each persons name the month they start. Does that make sense? Heres a simple example
I have column headers starting at B1 thru F1, with the following values Month1,Month2,Month3,Month4,Month5
In cell D2 i have the value 1
I want Cell A2 to return the value Month3
Whats the formula i need to input in A2
I have a column array with various cells in that array populated. In every subsequent cell in that array I want a formula that finds the previously populated cell and that value added a cell that is in the same row but two columns to the left.
I am trying to write a Macro that will identify a particular column by its field header (i.e. first row) and will run a specific set of code on that particular column.
My current code looks like this, coverting New York to NY:-
Cells.Replace What:="New York", Replacement:="NY", LookAt:=xlPart, SearchOrder:=xlByRows
This code applies to 'New York' found in the entire sheet. I need to identify a column that is named 'State' and then make the code run ONLY on that column.
I am now looking for a command that will return if a cell is populated. I.e. I need something that will find out which cell is the last one populated in a column (populated = contains data) and then will move 2 cells down, and then will enter some data into the following cells.
View 4 Replies View RelatedI've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
I've created a very simple formula which counts the number of days from Today and excludes blanks.
I'm trying to set it up so the formula *stops* counting the days once a cell in column C is populated.
Formula so far...
Code:
=IF(A3="", "",A3 - TODAY())
It looks exactly like this this [URL] .....
How would I write something that finds the first populated column in a row, starting at column C and moving to the right?
View 9 Replies View RelatedI'd like to get a reference to the last row or cell in a column of data.
View 9 Replies View RelatedI have attached a sample file. I would if possible like to have a hyperlink at the top of the sheet that when pressed would take you to the last populated cell in column G. I can do a normal hyperlinks but over time the hyperlink would take you to the wrong place as the sheet is filled in more and more. Is this possible?
I have tried to adapt various macros I have found on this forum but they on't seem to do want I ask of them I also seemed to have acquired an extra vba project (Ubitmenuo4) in the worksheet and can't get rid of it, so just ignore that
DATA
DATE
PRICE
DATA
20120621
118.1000
[Code] .......
I have 3 columns (data, date & price). What I would like to do is find the last populated cell in 'date' column and autofill it based on column 'data'. The tricky thing is that the date form is text and while autofilling manually it changes.
I have a template worksheet that several people use and print from.
The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit.
i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx‎
I am sure this should be REALLY simple, but i just can't find the answer i'm looking for. I have a sheet which changes daily in quantity of information. I want some simple code which counts up the number of populated cells in column A and returns the answer to a cell in another worksheet - or just automatically use it to print that number of pages.
I think i should be able to do the printing side, but, currently have no idea how to count up the number of populated cells in the row. If someones feeling very generous though, giving me the code for printing that number of pages too would save me some work (the worksheet which needs printing is different to the worksheet which needs the number of cells adding up.)
For column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies View Relatedget a cell to return a value depending on whether or not a cloumn is populated
for example. If i Have 3 columns EUR, GBP and CHF and there can (99% of the time) only be one entry in any of the 3 on any given row. How then can i get a 4th column to return the value EUR, GBP or CHF on the same row as an entry. I have a relatively complicate nested IF fromula but i think this is slowing down the worksheet as there are 500 or so rows containing it. Ive attached an example segment
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
[Code] ......
This works, UNLESS "My Column Header" is the last column, or second to last column, then it jumps left two columns, instead of landing on the correct column.
The purpose of this script is to select a cell directly in that column that I was searching for.
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
I'm looking for a formula that will return the column header (a date) of the first instance of a number greater than 0. For example if columns A through S had dates as in row 1 (header row), and in row 2, every column contained a 0 up until column P, I would want the date (Row 1, Column P) returned? I think this might be a sort of index/match formula, but I am not very familiar with these.
View 3 Replies View RelatedI have a spreadsheet with several columns (all column names are in row 1).
I have 2 of column names. Note that their actual column# might change so the macro would have to look for the column name and NOT the column position ...
I would like to add the column header to each of the row item and price, we maintain masters in the matrix format, butthe application supports only the row item mapping with the customer and pricing. Attached excel file
View 2 Replies View RelatedI need a formula to lookup and retrieve data from a table of values. Given an EMP-ID in column A of the row that contains the formula and given a column name in row 1 of the column that contains the formula, I need to do a lookup. So, in effect, I am doing a lookup based on two values .. the column header and the row header.
I have attached a small model to illustrate what I need. Cell C-3 in the first worksheet will contain the formula to lookup and retrieve the value in cell C-7 in the second worksheet, based on the values in cell C-1 (column header = “Database Col 2”) and in cell A-3 (row header = “257”) in the first worksheet.
Is there a way to reference a column depending on its header? Is there a way of doing this without the need of surveying one-by-one all the column headers with a for loop? I need this cuz if I have a very dinamic program which moves columns arround and depending on the state of the program the position of a column can change.
View 2 Replies View RelatedHave a set of dates as column headers across a worksheet. Rows are product names. When a product is delivered, the cell is marked "delivered" for the date (in the column header) it was delivered. Need a formula that will look across each row (product), and return the date of the first cell with the value "delivered". I have: =INDEX(F19:AS19,1,MATCH("delivered",F19:AS19,0)) <for row 19. right now, but its just giving me "delivered" as the value and I cant figure out why.
View 2 Replies View RelatedI have software (SAS Add-In for Microsoft Office) that loads external data into Excel. The data has a title, header, and rows/columns. It automatically creates a named range such as Table1. The named range does NOT include the headers.
Here is an example:
Code:
SASApp:SASHELP.CLASS
Name
Sex
[Code]....
As above, can I dynamically derive the column number based on the header row of the named range, where such named range refers to a table?
On a related topic, can I derive the column name given the column number? For example, in pseudocode:
Code:
For currCol = firstCol To (firstCol + lastCol - 1)
' Assume a function called ColumnName
Debug.Print ColumnName(currCol)
Next