Divide Cell By The Number Of Populated Cells In A Column
Apr 11, 2014
I have attached a sheet as an example, as i am trying to Divide a cell by the number of populated cells in that column e.g column (A) has a table of 16 but only has 13 populated cells in that column, the sum would be something like this =sum(A18/13. Sometimes the column will have less and at times more populated.
test sum skip blank cells.xlsx
View 2 Replies
ADVERTISEMENT
Aug 7, 2009
I am sure this should be REALLY simple, but i just can't find the answer i'm looking for. I have a sheet which changes daily in quantity of information. I want some simple code which counts up the number of populated cells in column A and returns the answer to a cell in another worksheet - or just automatically use it to print that number of pages.
I think i should be able to do the printing side, but, currently have no idea how to count up the number of populated cells in the row. If someones feeling very generous though, giving me the code for printing that number of pages too would save me some work (the worksheet which needs printing is different to the worksheet which needs the number of cells adding up.)
View 2 Replies
View Related
Aug 27, 2009
I really struggle with the following scenario:
A1=5 B1=4 C1=0 D1=0 E1=5
What I want to do is to divide the sum of those cells with the number of cells with a value > 0 (but all cells must be controlled to check if the value > 0).
In real life it's easy to see that I want to do 14/3 (A1>0, B1>0 and E1>0 equals three cells), but how to write this formula in Excel?
View 3 Replies
View Related
Feb 6, 2014
I am trying to add 2 groups of cells and then divide the number by 60?
I can't get it to divide? It will only total.
=SUM(T807:T832)+SUM(T837:T846)/60
View 2 Replies
View Related
Nov 15, 2006
Is it possible to count the number of cells in a row which contain data?
View 2 Replies
View Related
Jun 30, 2009
I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.
=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)
View 14 Replies
View Related
Jul 9, 2008
I am wondering if it is possible to create a formula in a cell that will divide whatever number is entered into that cell by a set or fixed number.
ie. I enter the number 9 in the cell and when I press enter, the 9 is instantly divided by 15 and the answer is displayed in the cell where I just typed the 9.
View 14 Replies
View Related
Mar 10, 2014
I have a lot of cells containing numbers. Some numbers are small, some are big.
I want to divide all numbers which are greater than 300 by 1000.
IF cell A2 > 300 THEN divide by 1000.
How to do that? Is it possible to convert value in the same cell like using conditional formatting principle?
View 7 Replies
View Related
Jun 26, 2013
Excel 2010
Sheet 1 contains range B12:B353 with names of people. Sheet 2 range B12:B353 contains a formula to extract the names from Sheet 1 if range D12:D353 contains a certain value:
=IF(Sheet1!D12:D354="A",(Sheet1!B12:B353)," ")
At the bottom of each column in Sheet 2 I am trying to get a total count of populated cells (a running count of names actually visible). I have inserted formula:
=COUNTA(B12:B353)
Which should count the number of cells with text in them, right? But I believe it's somehow counting the formula as text because I inserted the value of "A" in Sheet 1 Column D for 3 names. It returned a number of 331 at the bottom of my column in Sheet 2. First off, a return of 331 doesn't make sense in any way (still scratching my head at this return. It should have returned a value of 3.
View 3 Replies
View Related
May 29, 2013
Some code that will remove blank cells from across five columns (A:E) so that after running code all data in each column moves to the top of sheet?
View 9 Replies
View Related
Sep 30, 2008
I'd like to get a reference to the last row or cell in a column of data.
View 9 Replies
View Related
Feb 27, 2009
Im wondering if this can be done in excel..
2 columns
if the value in column O=$0.00 then I need to divide the adjacent cell in column L by 0.3 or multiply by 30%
this is the way I was trying to do this...
=IF((O2:O6722)=0,DIVIDE(L2:L6722).3)
I have tried it several different ways and cannot get it to work - is it my formula or can this even be done because I can't reference just one cell?
View 9 Replies
View Related
Feb 9, 2013
I have attached a sample file. I would if possible like to have a hyperlink at the top of the sheet that when pressed would take you to the last populated cell in column G. I can do a normal hyperlinks but over time the hyperlink would take you to the wrong place as the sheet is filled in more and more. Is this possible?
I have tried to adapt various macros I have found on this forum but they on't seem to do want I ask of them I also seemed to have acquired an extra vba project (Ubitmenuo4) in the worksheet and can't get rid of it, so just ignore that
View 4 Replies
View Related
Jul 21, 2009
I have a column array with various cells in that array populated. In every subsequent cell in that array I want a formula that finds the previously populated cell and that value added a cell that is in the same row but two columns to the left.
View 13 Replies
View Related
Feb 6, 2009
Basically i have a manpower chart with months along the top and names down the far left. People are going to start work in different months so i want to know at the side of each persons name the month they start. Heres a simple example
I have column headers starting at B1 thru F1, with the following values Month1,Month2,Month3,Month4,Month5
In cell D2 i have the value 1
I want Cell A2 to return the value Month3
Whats the formula i need to input in A2
View 9 Replies
View Related
Jul 3, 2012
DATA
DATE
PRICE
DATA
20120621
118.1000
[Code] .......
I have 3 columns (data, date & price). What I would like to do is find the last populated cell in 'date' column and autofill it based on column 'data'. The tricky thing is that the date form is text and while autofilling manually it changes.
View 6 Replies
View Related
Mar 8, 2007
I have a template worksheet that several people use and print from.
The range on this worksheet used is A1:C499
I want the VBA to look at tha last cell that is populated in column A and set the print area to suit.
i.e. the last cell used in column A could be A277. then I'd want the print area to be A1:C277.
View 9 Replies
View Related
Feb 6, 2009
i have a manpower chart with months along the top and names down the far left. People are going to start work in different months so i want to know at the side of each persons name the month they start. Does that make sense? Heres a simple example
I have column headers starting at B1 thru F1, with the following values Month1,Month2,Month3,Month4,Month5
In cell D2 i have the value 1
I want Cell A2 to return the value Month3
Whats the formula i need to input in A2
View 9 Replies
View Related
Jun 24, 2006
get a cell to return a value depending on whether or not a cloumn is populated
for example. If i Have 3 columns EUR, GBP and CHF and there can (99% of the time) only be one entry in any of the 3 on any given row. How then can i get a 4th column to return the value EUR, GBP or CHF on the same row as an entry. I have a relatively complicate nested IF fromula but i think this is slowing down the worksheet as there are 500 or so rows containing it. Ive attached an example segment
View 6 Replies
View Related
Apr 21, 2014
In cell H5 there is list of dates and in H7 there is codex, based on these two conditions in H11 a data validation list should be populated from the code_sheet using column B. The populated list should be unique entries, as the column B in code_sheet has duplicates.
View 9 Replies
View Related
Nov 28, 2008
I having a bit of trouble entering numbers in Excel, every time I try to enter a number it seems to divide it by 100. For example : - 1 entered in to a cell becomes 0.01, 100 becomes 1....etc. I've tried formatting the cells and had no luck, tried Tool>Options but not sure where to look.
View 2 Replies
View Related
Sep 6, 2005
=1/25%
is it that you want a UDF
Function MyFun(a,b)
MyFun = a / b
End Function
Usage:
=MyFun(1, 25%)
Mangesh
"Gonecoastal1" <Gonecoastal1@discussions.microsoft.com> wrote in message
news:B257DADD-0042-4CF8-88DF-1D17AEAFF627@microsoft.com...
View 14 Replies
View Related
Apr 4, 2009
I have an array in my code and I need to divide each elements of the array with a constant.
View 9 Replies
View Related
Oct 2, 2008
I basically have lots of lists of 12 cells. how ever some of those lists contain errors (e.g instead of having 12 numbers it will only have 10)
so instead of doing =sum(a1:a12)/12 i want to divide by the amount of numbers in that area in this case 10 so i can get an average.
View 3 Replies
View Related
Oct 5, 2007
I have a simple formula that adds two numbers and divide the result by another number
K1: SUM(E1,F1) / H1
K2: SUM(E2,F2) / H2
K3: SUM(E3,F3) / H3
K4: SUM(E4,F4) / H4
K5: SUM(E5,F5) / H5
etc, etc
and then I average the results
AVERAGE(K1:K5)
etc, etc
When H1, H2, H3, etc is 0, it generates a #DIV/0! (since you cannot divide by 0)
I want a formula that I everytime a H1, H2, H3, etc is 0, I want to set it to a specific number H1, H2, H3, etc to 15.00
For example:
IF (H1 = 0, 15.00, sum(E1,F1) / H1)
If the number provided (H1) is 0, set it to 15.00, otherwise add the two numbers (E1, F1), and divide this result by the number provided (H1)
But this is where the problem is:
In every single cell that I have NOT yet provided information, it treats the BLANK cells as if it was 0, and has set every single cell to 15.00.
View 9 Replies
View Related
Aug 15, 2012
code that will count the number of cells under a "title cell" that is recurring in a column, and then divide the result by 2. The result will then be displayed in another column preferably aligned to the "title cell" (in this case "Items") in column A.
For example:
Before code is applied
A1: Items
A2: Items
A3: four-legged
A4: dog
A5: two-legged
A6: chicken
A7: Items
A8: four-legged
A9: cat
[code]....
After code is applied to column A
A1: Items B1: 0
A2: Items B2: 2
A3: four-legged
A4: dog
A5: two-legged
A6: chicken
A7: Items B7: 1
A8: four-legged
A9: cat
[code]....
View 9 Replies
View Related
Apr 10, 2014
I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
View 3 Replies
View Related
Feb 10, 2014
I need a formula that will divide a number and if the answer is greater than a 100 then blank.
i've been using this =IFERROR(SUM(H4/C4,"",IF(K4>100,""))) but no luck.
View 6 Replies
View Related
Apr 2, 2009
I'm trying to create a formula which will allow me to do the following
1. Enter the number of jobs received
2. Divide it by the staff available without ending up with decimals.
As an example. Say I have 60 jobs to be allocated and there are 13 peeps to distribute them to I'm currently getting 4.62. What I need to do is make sure that the jobs are only issued as whole numbers. E.g 5 peeps gets 4 and 8 get 5. I also need to factor in jobs on hand etc but I have already cracked this.
View 2 Replies
View Related
May 31, 2013
I have 4 columns labelled 1st Year, Frequency, Spread and cost. then I have columns spanning upto 30 they represent years but can be labelled as 1 to 30. My challenge is that I want a formula/function/macro that depending on what I type in the first 4 columns it will populate the remaining 30 columns with either cost or 0.
Example: if I had £9,000 at a frequency of 10, starting on the 5th year with a spread of 3.
The cost represents the cost of each frequent. so in the example I would get £3,000 on each of the 5th,6th and 7th years then another £3,000 on the 15th,16th,17th years and finally another £3,000 on the 25th, 26th and 27th years.
what I want to be able to do is have one function/formula that I can paste across all of the year cells. I currently have a formula that can copy the cost at different frequencies but I cant figure the spread out.
=IF($K:$K>0,IF(OR($8:$8=$J:$J,MOD($8:$8-$J:$J,$K:$K)=0),$L:$L,0),0)
where K is frequency
8:8 is year
J is cost
what is the best way to approach this?
View 2 Replies
View Related