Specific Formula Executed In Column Of Data Depending On Selected Value In Cell
Apr 4, 2013
I have a sheet with a country in it in A1 (validation list).
Depending on the country in A1 a country specific IF command has to be executed on a column1 with first cel = A3. This IF command also relies on the values in column 2 and 3 on the same row. (B3 and C3 are in the IF cmd)
I taught to do it like this : =IF($A$1="Spain";$A$5;0) with A5 being the country specific IF command which should be executed when spain is selected. however when I do this, this only works for the first cell ( I cannot drag this formule down, since it will always give the value calculated in column 2 and 3 on row1.
I'm not sure if the best way to 'select' the country specific IF cmd is with another IF command..
I'm trying to identify the Active Cell for the formula that is executing.
Currently, using VBA, if the last manually clicked active cell (where the cursor resides) is different than the cell containing the executing formula I get the wrong cell, row, or column using ActiveCell.
What I would like to do with the information that I have put together on a different workbook is to reference an Agent (column A), and a time range (Date is in column D) and then copy the row from A to I for each occurrence during that range of dates so we can see how many and what errors have occurred during any range of dates selected. (I will have different people inputting errors at different times so the dates will not be sorted unless they have to be). I want to be able to select different agents/date ranges to be able to get a glance of how that particular agent did during this time frame.
Here is an example of the work sheet where the data is originaly.
[Removed]
Here is an example (in a different workbook) of what the sheet should look like if I was searching errors for Albert Ozier between 1/25/2010 and 1/28/2010.
MONDAY xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc. Hours State1 - Hours State2 - Hours State3 - etc.
TUESDAY xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc. Hours State1 - Hours State2 - Hours State3 - etc. WEDNESDAY xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc. Hours State1 - Hours State2 - Hours State3 - etc.
Each team leader would then input hours in each state each day on their column. Make sense? Easy Peasy...
My question........... is it posible to have a userform where a TL would select their name (Column) and Day (Monday=Row 3, Tuesday=Row23 etc) from a dropdown and then input figures in txt boxes to submit them in the correct location?
I need a formula that displays the word "Day" or "Days" depending on cell entry i know the formlula =IF((B12)>0,"Day","") to show the word day but i want it to show "day" if a 1 is entered or "days" if any number over 1 is entered.
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value 'If FindRemove = "" Then End
' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select
' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
I have some delivery ratings from suppliers, and I want to assign a specific letter to each rating, depending of the obtained number. Criteria is:.........
I want to create a macro that when selected will take me to a specific row and column in another worksheet, this will be the outcome of two cells, so far i have it to take me to the row but no reference to the column can anyone help.
code i have so far.
Sub Find_Todays_Date() Dim FindString As Date Dim Rng As Range FindString = Sheets("Dynamic Whereabouts").Range("B1:B1") With Sheets("whereabouts 08").Range("A:A") Set Rng = .Find(What:=FindString, _ After:=.Cells(.Cells.Count), _ LookIn:=xlFormulas, _
I have a macro that loops through several workbooks and copies data to one common sheet. Works great with one flaw that I have not been able to resolve. I am using the End Property example below, this works great as long as there are more than one cell with data. With one cell having data this takes you to the bottom of the sheet.
Need code to select from a specific cell to the last cell in that column with data where when the selected cell is the only one with data that would be the only cell selected.
I am looking or a code, (Or formula if one exists) to hide or un-hide columns depending on what is entered into a cell. I have attached an example to help clarify what i mean. Basically i want:
If A2 is empty, hide columns C, D, E & F If A2 = Apple, Unhide columns C & D, but keep E & F hidden If A2 then becomes Banana, rehide C & D and unhide D&F
Sub Auto_Open() Sheets("Data").Select Range("A2:E32").Select Selection.Copy Sheets("May").Select ActiveWindow.SmallScroll Down:=-9 Range("A2").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Range("A1").Select Sheets("Data").Select Range("A1").Select ActiveSheet.Paste Range("A1").Select Sheets("Sheet1").Select Range("A2:E32").Select Selection.ClearContents Range("A1").Select End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following: Within a workbook the 1st sheet is the data entry. In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example: Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry. G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken Cow Donkey Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
I have data in several cells, and I want to extract only the information in the cell up to a /. For example "joesmith/shipping" I would like to have only joesmith in the cell next to it.
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before: Column A Column B one test one test two test two test three test three test
After:
Column A Column B one test one test Coz two............................
I was wondering if there is a formula that will search a cell for a word or other specific criteria then if it finds it, puts the requested data / word in the formula cell
Example:
If I have a list of vehicle descriptions all in different formats:
CAR1 1.4 SRI 3 door Hatch CAR2 5 door saloon GSI 2.0 V8 2.2 CDX 5 door CAR3 Estate CAR3 Estate 5 Door CDX
Say I want to know which ones are CDX varient I need the formula to look in the cell and return "CDX" or "YES"
I have a worksheet that has a months worth of data on it. The sheet is divided into sections with each day of the month being given 10 rows. So day 1 of the month will occupy rows 1 to 10, day 2 rows 11 to 20 and so on.
In each of these sectors, I would like to have an editable tick list that displays when a certain cell is selected. For example in day 1, selecting cell A3 will display the tick box. If I need a tick list for each day, would I need to create a fresh userform for each day or is it possible to have just one form and have excel remember the setting.
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
Let's say I have data validation on column A, which only allows 2 values, "Number" and "Letter". Easy enough. If the value "Number" is selected in A1, when the user moves to B1, I want a validation list of 1,2 and 3, when they move to C1, I want a list of 4, 5 and 6 and when they move to D1, a list of 7, 8 and 9. However, if "Letter" is selected in A1, when the user moves to B1, I want a list of R, S and T, when they move to C1, U, V and W, and when they move to D1, a list of X, Y and Z. I tried using dependant validation, but can only get all three columns (B, C and D) to either be 1, 2 and 3, or R, S and T. The validation lists would be existing named ranges on a separate sheet.
In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata() Sheets("ConsolidatedYTDReport").Select Range("E2:H4202").Select Selection.Copy XXXXXXXXXXXX ActiveSheet.Paste End Sub
Let's say I've got nine entries of data. Column A is aligned like this:
One One One Two Two Two Three Three Three
What I would like to do is write a macro so that the three entries with "One" in Column A get cut and pasted into a newly-created sheet named "One." All of the Two's get cut and pasted into sheet "Two" and the same thing with the Three's.
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
My formula works fine, but I need the first number of the answer displayed with only two decimal places. The formula averages a set of numbers, then adds " of " and a cell reference.
I want the answer displayed as 2.43 of 3. Here is the formula.
=IF(AVERAGE(W12:W123)>0,(AVERAGE(W12:W123))&" of "& Z9,"") it works perfectly but displays 2.42857142857143 of 3.
The cell is formatted to NUMBER with two decimal places. . Changing the format has no effect, but changing the formula does.
If I use =IF(AVERAGE(W12:W123)>0,(AVERAGE(W12:W123)) or =AVERAGE(W12:W123) the result is 2.43. When I add the next portion, &" of "& Z9,"") it changes to 2.42857142857143.
I've tried reformatting cells and nothing changes. This is the only cell I'm having problems with. The worksheet seems to be working fine.
