Here is basically the problem, I have 2 sheets and want to copy/ paste them like this:
Sheet 1
Name of a product
Data 1
Data 2
Data 3
[Code]....
Can this be done in Excell 2007?
I am building a rather good size userform. It is getting really lengthy code-wise because I want certain things to be enabled and disabled on the form as they click on certain options.
I know I can hard code the lines but so I am trying to come up with some coding elements where I will not have to add 20+ lines of code for everytime I want to add a new feature.
Here is one of the functions that I have, There is going to be several of these:
Private Sub chkMore2_Click()
If chkMore2 = True Then
cboProtocol2.BackStyle = fmBackStyleOpaque
cboApplication2.BackStyle = fmBackStyleOpaque
txtLowPort2.BackStyle = fmBackStyleOpaque
[Code] .......
So If I click chkMore2 ... all of the 2nd elements will be editable. If I click chkMore3 ... then all of the 3rd elements will be editable, etc. etc.
So I tried to play with this code example:
Private Sub CheckBox1_Click()
If CheckBox1 = True Then
Call Changeit(1, "yes")
Else
Call Changeit(1, "no")
[Code] ........
Excel 2007 does not like the .concatenate element.
Writing code in VBA for splitting data into multiple sheets?
The split needs to be based on value in one of the columns and the sheet where the data will be sent to should get sheet name same as value in the column.
Following is the input sheet, the data needs to be split based on entry in the column "Job Type".
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair
04-Apr-13$20033456Contract Work10-Apr-13$40047896General23-Apr-13$100Input Sheet
Following tables are showing data split into multiple sheets and the sheet names are the same as entry under the column "Job Type"
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount21234Repair04-Apr-13$200Repair
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount23456Contract Work10-Apr-13$400Contract Work
Excel 2007ABCD1Invoice NumberJob TypeInvoice DateAmount27896General23-Apr-13$100General
I have a list of about 4,000 contacts each with about 2 or 3 products with us. Each product creates a new contact row.
I would like to merge each row with the same contact into one row.
I have attached an example : Example test.xlsx
is there a way to combine the info from several columns into 1 list?
All of my columns have information in rows 1-20, but I want it all to automatically combine into a list in column B on a new sheet.
This is Excel 2007
I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .
[Code] .....
And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
I have data in two sheets. None of the sheets the rows and columns are fixed.
I want to copy the data from the two sheets and paste it in the third sheet. I have attached a sample sheet for reference. I need to set it in page width so that I can print that.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View Relatedusing Excel 2007 on WinXP
Attached is a run down version of a spreadsheet that I am trying to find a quick way to compare information. [URL]
What I want to do is look at the data on Sheet "Roster" and compare it against the data on Sheet "Payroll" and where data is missing or doesn't match, then to write this to a new sheet called "Exceptions"
eg. Person 7 has no data on the "Roster" sheet, but has 2 entries on the payroll sheet with the "SIC" leave type, so this would be included on the "Exceptions" sheet.
I have approx 6000 rows of data in the main version of this spreadsheet to reconcile against, so really need to find a smart way to make this happen...
I have the following code which compares a string between two sheets. First sheet is 'data', second is 'saw'. I'm trying to copy an array of numbers (energy consumption for each hour of the day) based on machine ID and date (hence the compare string). How to modify it so it will copy the array of 24 number, not just the first number?
I have a few worksheets 'saw', drill, lathe. So I am using ActiveSheet, so I can run the same macro as all data is in the 'data' worksheet.
Sub test_copy()
Dim a, i As Long, txt As String
a = Sheets("data").Range("a1").CurrentRegion.Value
With CreateObject("Scripting.Dictionary")
.CompareMode = 1
[Code] .......
--------------------
datasheet below
--------------------
Excel 2007
A
B
C
D
E
F
G
H
I
J
K
L
M
N
1
sawing machine
2
100569
01/10/2012
0.1
0.25
0.89
0.25
0.22
0.14
0.56
0.47
0.58
0.45
0.47
[Code] .......
-----------------------
machine sheet
-----------------------
Excel 2007
A
B
C
1
100569
23/09/2010
2
100569
24/09/2010
[Code] ...........
Using Excel 2007, I have a workbook with 7 sheets. The first one is a Navigation Page where I have checkboxes (form controls, not active X) with the names of the other 6 sheets. When the box(es) are checked, the sheet(s) become visible. I have accomplished this by assigning macros I recorded.
I need to now add the opposite: When the box(es) are unchecked, the sheets become hidden. From googling and looking for other threads/forums here, I gather that I need to add code/ VBA, but I know nothing about these at all.
I am using Excel 2007. I'd like to merge multiple sheets (about 13) into one workbook. The sheets are placed in one folder, and they all include 2 sheets, - only the first sheet should be merged into the final workbook.
The sheets will be updated every 3 months and merged again (-thus replacing the old data).
I have two data sets across two worksheets. The first worksheet contains sales order numbers (Sheet1:column A) and other data . The second worksheet contains sales order numbers (Sheet2:column A) and the product details.
On sheet1, I had to manually duplicate a sales order number (inserting another row) if the number of units of the order is greater than 1. I then need to fetch the product details from sheet2 for each unit for that specific order number. However in sheet2, there are multiple products for one sales order number.
How do i create a lookup/match to fetch the product details for each sales order number without duplicating the product details if there are multiple products for one sales order number?
I know a simple vlookup function will return the values that it matches first and that is not what i want.
Example: Sheet1
Column A (Sales Order#) | Column B (Quantity)
0417436GPCP | 1
0417436GPCP | 1
0413412FACY | 1
0413412FACY | 1
[code].....
How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.
And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007
I am using excel 2007. My issue is i have a front sheet that I want to list all my tasks due within five days of the day of the month the spreadhseet is opened.
All the tasks are on two different excel sheets though and one of them i update with different tasks 2-3 times a week.
I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.
I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.
For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:
#123456
789
I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.
I have an Excel 2007 workbook which has five sheets in. I just wondered whether it is possible to hide all five of them when the workbook is first opened. Also I would like the user to be asked for a password when they wish to unhide a sheet, with the password being different for each of the sheets.
Is there also a way to do this which won't be affected by Excel disabling all Macros when the application initially opens.
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
I'm basically working from 3 sheets for this so I'll start with an example of the data I'm using:
1st sheet:
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
I have 180 rows of data like this one in the first sheet
Second sheet(named sheet 1) is not used for this
Third sheet(named sheet 2):
table.tableizer-table {
border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif
font-size: 12px;
}
.tableizer-table td {
padding: 4px;
margin: 3px;
[Code]....
Basically I'm trying to find column #3 value in my third sheet and return the second column value. Problem is that the data is located more than once in the third sheet so I need the value of each one of them. So, with this example, Q5942X is located twice in the third sheet and each time, it has a quantity of 2. I would need either to return the value 2 twice horizontally or even better, add the two together. The first sheet, the example is row #45.
This formula should be in the column following "majoration".
I am using excel 2007 and windows 7.
My business I work for is a collection agency and from time to time our clients send us files that are beyond recognizable for our collection software to understand nonetheless import into our database.
The file was a PDF at first but I have since been able to convert to excel format.
The data isn't too scrambled just scattered throughout rows. I would like to have rows of patient data into one row.
The file after being converted was all in row A but I have since used text to columns to divide into separate rows. However now one patient information is on multiple rows and I need each patient info on one row.
The file looks like:
|A---------|B-------|C----------|
1.John-----|Doe-----|123 Main St|
2.New York-|NY------|
3.11100----|SSN----|Balance Owed|
I would like the data from multiple rows to continue on row 1 like this:
|A--------|B-----|C------------|D----------|E--|F-----|G----|H-------------|
1.John----|Doe---|123 Main St.-|New York---|NY-|11100|SSN-|Balance Owed--|
I am no programmer in the least and have very little to no experience in pivot tables.
This file has about 7000 accounts with patient info spread through 3-4 rows for each set of data.
How I could go about doing this without manually copying and pasting into additional columns on the same row. That will take hours if not days.
I have a dataset that, due to the nature of how it is generated, separates certain orders into separate rows. Which orders these are is irrelevant, I just need a quick and easy way to make excel re-combine these rows in to one entry, and sum up the data in one particular column in the process of doing this.
The separate entries of a single order can be identified by the data in 3 columns matching - I have attached an example.
The constituent parts of the same order can be identified when the country, city, and code columns all have matching data as you read down. E.g., where
Country City Code
a 1 12345
a 1 12345
a 1 12345
Where this is the case, I want excel to automatically sum the count of shops for this order and then delete all but one of these rows, with the remaining row now containing this summed figure. Failing this, a new worksheet being generated/a new column giving me this data would be good.
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies View RelatedCombine to sheets in one sheets using macro ...
View 9 Replies View RelatedI am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
View 1 Replies View RelatedI want to be able to run a macro that will export some of the data from a worksheet called Generated Report into another worksheet called Matrix. The data will be taken Generated REport and grouped into sections of the worksheet. These sections will be defined by the BRID value.
The Data that i want to export will be from the first 5 columns within the Generated Report(note there are other columns which data is not required from).
The following columns will be exported from Generated Report -
BRID,Requirement, Bug Description, Bug ID and Alt Bug ID.
BRIDRequirement Bug DescriptionBUG ID Alt Bug ID
PQ115 PQ115-Login Bug Description text xihllloloj43712 123
PQ116PQ116-Landing Bug Description text ghghghgoot 43713 126
For Matrix
The data will be imported into Matrix worksheet into the following columns as part of the row headings
- Requirement, Description, Bug ID and VF Bug ID.There will also be other columns (outlined below) which i will use to manually enter data
The data will be grouped and imported into the relevant section by its BRID eg PQ115, PQ116 etc.
I want each section (marked by BRID number)to be separated by row headings.
These row headings are to be generated after populating all data within each BRID number.
When the data has been populated in each row there is a column called 'Status' which contains drop down list boxes which can be assigned.
The default status will be set to 'To Do'. The complete row headings are displayed with Output from Generated Report underneath
BRID Priority Requirment Description BugID Alt Bug ID PC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ115 PQ115-Login Bug Description text xihllloloj43712 123 To Do
BRID Priority Requirment Description BugID Alt Bug ID QC UpdateNotes Actual Result Type of DEfect Test Status Tested by
PQ116 PQ116-Landing Bug Description text ghghghgoot43713 126 To Do
So far the macro that i have been using allows me to locate the data for each specific BRID in Generated Report and copy into the corresponding BRID section within the Matrix. I have to repeat this step for each new BRID and i want to be able to whole automate this process.
I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
Excel 2007 / Windows 7.
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
A
2/25/2014
Customer 1
10
1
3
ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
B
2/25/2014
Customer 3
10
1
3
RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result
1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
Excel -2007 & Windows 7
I have a workbook (excel07) that I use to import data onto our purpose built database. I have some macros to sort the data and send it to the correct columns however the one stage I still have to do manually is assign each row its own unique sorting Code (in a bespoke column "B2:B999").
These are objectives and the code should contain three seperate parts (part 1a and b do not need to be seperated);
1a. The characters "PO" should be the first in the code (for sorting purposes)
1b. The persons initials (first letter of the first name and last name) found in column J2:J999. [They are sorted by name so It would also be good to add a number after the initials seperated by a space incase of multiple objectives however I could defintly live with typing these in manually]
e.g. "Joe Blogs" second objective = JB02
2. The numerical part of the stategic objective they have selected found in column H2:H999. [incase you need this these range from 1.1-1.4, 2.1-2.5,3.1-3.6 and 4.1-4.5 all with a short text strings after which shouldnt be included in the code]
e.g. "1.1 We are Committed to being nice" = 1.1
3. The year they are applicable for which will all be "12/13" however I will need to change this next March.
Therefore the final code should appear as "POJB02 3.1 12/13"
There is a 16 Character limit on these codes but all of that information is needed for sorting, filtering and report generation, the spaces could be replaced by "_" if that makes things easier.