I have data in two sheets. None of the sheets the rows and columns are fixed.
I want to copy the data from the two sheets and paste it in the third sheet. I have attached a sample sheet for reference. I need to set it in page width so that I can print that.
Here is basically the problem, I have 2 sheets and want to copy/ paste them like this:
Sheet 1
Name of a product
Data 1
Data 2
Data 3
[Code]....
Can this be done in Excell 2007?
What I would like to do is combine all data (from sheet: Page1,Page2, and Page3) into one sheet named 'Consolidated'. Unfortunately, as you will see from the attached file, my programming and understanding of VBA programming is pretty naive.
What I am after is, when I combine the data, from all sheets into the one, the data should be
1. Automatically Sorted by Patient Name
2. Group, results of the same patient from all sheets one below the other in seperate rows
3. Delete any other rows that may have a patient name and ID, but rest of the rows (New Mole,Clinically Suspicious......Benign Naevus) are blank. (This happens because of the way I have designed my userform. For first visit the details are entered in Page 1, then for second Visit Details are entered in Page2, and for third visit in Page 3. So when I enter the first visit details, the Patient Name and Patient Number are copied into Page 2 and Page 3 even though the other details remain blank. I have done it this way because, if say the Patient comes for visit the second time, the clinician may or may not be aware which visit this would be for the patient. So as soon as they enter patient number, it will give them a message that Patient already exists. So when they click Open Existing Patient Record, the form autopopulates with any notes from their previous visit into the respective page (i.e Page 1,Page 2 or Page 3).
Page 1 (Page 2 and Page 3 are exactly the same)
Patient Name
Patient Number
New Mole
Clinically suspicious
Changed from mapping Photo
Level of Suspicion: Score
Monitor
[code].....
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies View RelatedI have a workbook in which a userform pops up which I use as an assessment form on my fitters. It goes through a series of questions on then when the submit button is clicked a sheet is added to the workbook which is named with the fitter's name and the current date - all this works fine...... what I now need to do is to create a summary page which will include basic information from each sheet in the workbook, bearing in mind that new sheets are constantly being added to the workbook.
View 9 Replies View RelatedIs there a way to take 4 workbooks with each one containing 4 worksheets into one content page?
For Example, I would like to have a table of contents on one worksheet referencing 4 workbooks where a person could click on a hyperlink that would open to a named workbook that contains 4 separate worksheets.
I am using excel 2002
I need drop-down combo box to change a graph based on the option selected in the drop-down
Challenge: my Combo box resides on the First sheet only, but the items that populate in the drop-down list are dynamic and change depending on how many sheets exist for this document. The options in the list are Overall, Week 1, Week 2, ... Week N. Overall needs to sum up the data (or I can pull just from the summary page if I am lazy) and the Week N corresponds to a specific sheet added.
I currently am able to get my drop down to populate items correctly, and my macros to create the sheets dynamically with templates just fine (not bad for newbie).
So what I need to figure out is how to tie my drop down to make a scatter plot/bar graph based on the selected option and action. I can't find an attachment option here but here is some code:
Sheet 1 Code:
Code:
Private Sub Worksheet_Activate()
Me.ComboBox1.Clear
Me.ComboBox1.AddItem "Overall"
[Code].....
I have a sheet with a data dump containing data on several railcars, taking up approximately 500 rows. Some railcars take up multiple rows, one row for each unique customer, and one railcar can have up to 5 customers' goods on it. What I need to do is get this information separated out onto monthly sheets, based on the departure date of the railcar. Every row of data in the dump has a column with the departure month I need in it, so that would make it seem easy. I have 12 sheets created one for each month, with the same headers as in the dump.
The two tricky parts:
1. The data in the dump is not sorted by railcar number, but the results in the monthly sheets need to be.
2. I don't believe LOOKUPS will work because rows in the dump repeat railcar numbers because of the multiple customers, and each of those rows has to be brought over to the monthly sheets, sorted and subtotaled by railcar number.
Finally, every week or so, I'm going to want to drop a new data dump in the dump sheet and need the monthly sheets to update dynamically. The new dump won't simply be rows added on to the same data as before, all the rows could be different. If this is solved most easily with a macro (i.e. drop the new data in the dump sheet, press a macro button and it populates the monthly sheets)
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies View Relatedi need to take all cells in column A with values and all cells in column B with values and combine them into column C so i can sort and subtotal. Columns A and B may have 2 values or 2000 values.
View 10 Replies View RelatedI have two sheets in this sample workbook attached and need to have the data from the Pending sheet and the Completed sheet to be combined into a third sheet in the same workbook. They have the same column headers and need a macro to combine them even as data is continuously added to both sheets as time goes on.
View 9 Replies View RelatedI have a task that pulls out information from the website. I need to write a vba code to find the last row. Since the no of rows are always not the same. I would need the excel masters help to solve it. Just a small piece of guidance would also help me.
In my work sheet I need to find the word " Function Name: Cleaning" if this is there then I should find the occurence of the word " name". If I find that then the code should copy the values in the column after name till it sees a space ( means no value). Should copy till that and paste that in another work sheet.
I have a print range set up that is based on a named range that is an offset formula. The problem is that I would like to set it up as portrait instead of landscape, but if I do that the area to the right doesn't all fit on the page. The print area will always be a certain width, just different hights. I just want to be able to have the print range adjust downwards and still fit the whole area on one page wide.
View 2 Replies View RelatedCombine to sheets in one sheets using macro ...
View 9 Replies View RelatedI am currently pulling information from a database into Excel. In column A is a list of dates that vary depending on how many days I decide to pull. On any given day there are options to which car will be driven and it is random and there are attributes associated with that drive such as below. If the car was not driven the data pull inputs "No Data" or a "0". On any given day up to three cars can be driven but it is still possible that only one will be driven. This is shown in the second table below. I'd like to be able to create an automated summary table such as the first table below. The summary table should be organized by date and show what cars were driven and their attributes. I know this seems simple but in reality I have six different cars and up to 10 attributes for each car and will be pulling months at a time. The only thought I have had is to do a for loop that checks every individual cell but I am not sure how to implement that.
Car
Miles
MPG
Car
Miles
MPG
Car
Miles
MPG
[Code] .....
I am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View RelatedHow to combine two worksheets (sheet 1 and sheet2) to a sheet named “combined”?
Sheet 1 and sheet 2 contain data wich is filled up by using formulas. The data range is from col A to F with headers in the first row, the length is variable.
Here’s an example:
Sheet1
ColA ColB ColC ColD ColE ColF
33 44 46 84 36 567
10 12 56 98 100 64
0 0 0 0 0 0
0 0 0 0 0 0
Sheet2
ColA ColB ColC ColD ColE ColF........
I have a dataset that is as follows:
Col1 2 3 4 ...... 45
123 456 xxx xxx xxx
100 234 xxx xxx xxx
221 543 xxx xxx xxx
112 234
112 689
122 956
122 234
This goes on from left to right for 45 odd columns.
I need to copy each set i.e set 1 is 123 down to 122 to say cell a25 and then copy the next set i.e. 456 to 234 below the first set.
I need to somehow write a loop code that knows where to get the 2nd, then 3rd set, etc and copy it to the bottom of the preceeding set
I have a workbook with a Sheet named Main Data. The sheet named Main Data, I want to leave alone. The remaining 8 or 10 worksheets (the number of sheets can vary), I would like to take the range A2 to the last row in AH that has contents in it and paste those ranges from each worksheet into one new worksheet so that they do not overlap. I don’t know how to do that so the range I am using in the code below is A2:AH60000 consequently it will not copy the entire range from each worksheet because there are not enough rows in the destination sheet.
View 2 Replies View RelatedI have a worksheet that has about a dozen sheets that are all the same, just different data. Each sheet is like a checkbook register that has date, memo, amount.... each sheet is for a different account. I have a form that I enter the info into, it puts it into the right sheet and sorts that sheet. This part all works.
But now, I want to take all the info from the different sheets and combine it into one master register sorted by date. I won't make changes to info in this master register, it would just be for info, so it doesn't have to work backwards. I need this to be automated.
Obviously, it's easy to copy all of them to different areas in one sheet, but I want to have them all in the same columns, and that is what I can't figure out. My sub registers don't have the account name listed for each entry, as it isn't necessary as the registers are labeled. But, the entries in the master register would have to have them to figure out where they came from. I can solve this by adding it to the sub accounts and hiding it or something if that is the easiest way. I also need to make sure it doesn't remove duplicates.
I have 3 sheets in my workbook, DataA, DataB, and DataC
Data A contains:
ID_customer
and 4 variables A-D
DataB contains
ID_Customer
and 4 different variable W,X,Y,Z
Data C contains
ID_customer
and other 4 different variables
Request: I need to analyses the relationship between the variables using a Pivot table.
My thoughts so far: I think that I need to combine all the information onto one sheet first and then use the pivot table function, but its currently unable to combine onto one sheet, due to Id_ customer numbers appearing several times in DataB and DataC (and not always the same number of times in both), I need to retain all the information from DataB and DataC
I have attached a sample of my data : DataA.xlsx
I have an excell spreadhseet that has more than 100 sheets and I would like to combine all these sheets into one master sheet (Sheet1 = MasterSheet) within this workbook. Each sheet has different number of rows used. I just want used ranges to be copied over to a master file appending the previous copied range.
Sub MergeSheets()
Dim strSheet As Object
Dim LR As Long, LC As Long
Sheets("Sheet1").Name = "MasterSheet"
LR = Cells.Find(What:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows).Row
For Each strSheet In Sheets
If strSheet.Index 1 Then
[code]....
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr
Rental Equip ID
Rental Group
Rental Sub Group
Rental Qty
Rental Cost
BALL JOINT ADAPTERS 4WD
004-0302
13
2834
1
$ 50.22
[Code] ......
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
I have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
I am trying to do is to combine multiple sheets from multiple workbooks if in the created parameters table it has a 'y' next to it. (So you can specify which workbooks to copy from and which worksheets to copy from) - please see example file to get a better understanding.
Example file:
Master
What I have is a parameters table which defines which workbook/worksheet to look in (please see attachment) on the 'parameters' worksheet.
I also have a 'raw data' worksheet within the same workbook where I want the combined data to go.
File a.xls/b.xls/c.xls etc
Theses are the workbooks where all the data is held which I want to combine, each workbook is the same, just different 'data'. - they are all in the same path too.
In the first column in the parameters table I have the available workbooks:
a.xls
b.xls
c.xls
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that workbook or a 'n' if I don’t.
In the second column in the parameters table I have the available worksheets:
sheet1
sheet2
sheet3
etc
and next to it a 'y' or 'n' - 'y' if I want to copy data from that worksheet or a 'n' if I don’t.
In the attached example I have code which loops through each file a,b,c dependent whether it has a y/n next to it but I need some code to get it to copy data from the specified sheets in the second column (if it has a Y next to it) in the parameters table to the raw data worksheet in the master workbook with the filename of where the data came from in column A (eg A.xls).
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI have an 6 sheet excel workbook that generates 27 additional sheets upon an executed macro. I am trying to page setup the additonal 27 sheets only to a zoom of 90. Here is what I have so far but this zooms all 33 sheets.
HTML Sub zoom_2()
Application.ScreenUpdating = False
Dim wk As Worksheet
For Each wk In ThisWorkbook.Worksheets
wk.Activate
With ActiveSheet.PageSetup
.zoom = 90 End With
Range("A1").Select
Next wk
Sheets("data").Activate
End Sub
I work for schools use data to guide teachers practices in the classroom. My main function is to mine down through data for kids that teachers focus on specific skills with specific children.
I start with a big conference each summer. By hand I combine, by student name, the data collected over the past school year. We then tear down to student levels setting goals based on statistical analysis. I need to combine across all of these csv files in a way that appends the data from each into one line per kid. I thought that 'vlookup' or 'index, match' might do it. I don't know.