Combining Multiple Macro's ...
Oct 23, 2008I was wondering if you could help me combine a load of Macros (Theirs about 20, but I've only put two here)The code I have is this...
View 10 Replies
ADVERTISEMENT
Combining Multiple Cells In Multiple Worksheets In Multiple Workbooks Into One Table
Jan 6, 2009I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
Combining Multiple IF / AND Formulas?
May 26, 2014Is it possible to combine the following three formulas into one formula?
=IF(AND(H5>59,(I5<5),(J5<15)),("Close Out"),(""))
=IF(AND(H5>59,(I5<15),(J5<5)),("Close Out"),(""))
=IF(AND(H5>55,(I5<10),(J5<3)),("Close Out"),(""))
Combining Multiple IF Statements
Nov 11, 2009I have attached a sample spreadsheet for your review. I think I need to combine multiple IF statements into one single statement. See column I:
There is currently a formula in Column I that looks at Column H and computes a ROUND formula based on this information. Unfortunately, this formula only works if Column J says "MB". If Column J says "Minutes" then I need Column I to compute with this formula: =IF(H2<30,0.5,ROUNDUP(H2/60,1))
How can I combine this with the current formula to get what I am looking for? Here is the current formula (for MB): =IF(H2<0.125,0.125,ROUND(H2,4))
Combining Multiple Rows Into One Row
Dec 28, 2012I have a list of data elements listed row by row with headers
last 4 of SSNFull Nameschool_codeterm_beginterm_endSchool Rep NameEmail
1111 Jim smith 00104600082012 082016 school reptestemail@hotmail.com
2222 Jane Doe 00104600082012 082016 school reptestemail@hotmail.com
3333 justin justin00104600082012 082014 school reptestemail@hotmail.com
4444 Joe Joe 00104600082012 082016 school reptestemail@hotmail.com
5555 Jake Jake 00104600082012 082016 school reptestemail@hotmail.com
What I need to do is to get all 5 rows into one row and duplicate the headers so row 1 has all fire rows of information one column after the next comlumn. If I can't duplicate the headers easily and can just aggregate the data into one row in cell by cell that fine.
Sample document attached for review
Combining Multiple Sheets Into One?
Oct 24, 2013I need to combine multiple sheets in to one sheet. Each sheet has a column with unique identifiers but other columns have different data. The model is attached.
View 5 Replies View RelatedCombining Multiple Macros Into One?
Mar 12, 2014I have a userform that has the same type information on 3 different entities (name, address, phone, etc). The same research is required on each one i.e. you need to look up the zip code for each). Therefore I have a bank of buttons on each page of the multipage form. Each button does the same thing depending on which page you are on. The following is my code to copy some information and open another application depending on which page you are on and which type entity.
My question is how can I combine these into one so my module is not 3' long.
Combining Multiple Templates Into One
Aug 17, 2009A member of my team has created numerous templates in Excel 2007 for various customers. Each template has some columns that are identical for each (Cust Name, for example), and some columns are unique to each customer. I want to combine all of these individual templates into one Excel workbook and be able to click (select from a dropdown list) the customer name, and have only those columns that pertain to that customer appear. Select another customer name, different columns appear, and so on. Is this possible to do in Excel 2007? [This is my first post, so please forgive any offenses if my question is too long.]
View 9 Replies View RelatedCombining From Multiple Workbooks
Mar 9, 2009I have multiple WB's all with the same format in a single folder. I need a button to copy all the text from each WB into a single Master WB that has the same format. There are 3 sheets in each client WB corresponding to three sheets in the Master WB. Each client WB has a number of rows (or none) on each sheet and when they are copied to the Master they need to paste consecutively and into the corresponding Master sheet.
Something like this:
Copy rows from [WB1].Sheets 1, 2 and 3 (starting at a:4, columns A-Q). Then paste to corresponding [MasterWB].Sheets 1, 2 and 3 (at a:4, columns A-Q) then repeat with Next Book.
I hope thats clear enough. The Client WB's are all named "stats [name].xls" with 1 hidden sheet (to populate lists) and 3 sheets named "POC", "ISS" and "ECS" repectively. The Master WB is named Stats.xls with the same sheet names as the Client WB's.
The following code was written for me by a helpful member of this forum but it only copies the first sheet of each Client WB. When i tried to duplicate and modify it to copy the second and third sheets I could not get it to copy from the second/third sheets and it meant 3 buttons/3 steps/3 times the confusion.
Sub Report()
a = 1:
st:
If Sheets(5).Cells(a, 1) = "" Then GoTo endd
Path = Sheets(5).Cells(a, 1).Text
If Dir(Path) = "" Then
w = MsgBox(Path + " Is Not A Valid Path / File", , "REPORT")
a = a + 1: GoTo st
End If
If there is anyone who could help me with this I would very much appreciate it. I am only a basic user of Excel and VBA is still new to me. Adding modules and understanding basic commands is as much as I know at the moment.
Combining Multiple Rows
Jun 22, 2009Not really sure what I want to accomplish is called but here's a description:
I've got a file with 2 columns
Column A Column B
C53445002558-001--104
C53445540.00
C53455002558-003--105
C53455540.00
C53465540.00
C53475002558-003--105
C53475760.00
C53485002552-002
C53485002558-003--105
C53487294.00
C53495002558-003--105
C53495540.00
What I want is the following:
C53445002558-001--1045540.00 ....
Combining Multiple Rows Into One
May 18, 2006I have two spreadsheets of 27,000+ rows each.
Each one consists of user data for each time they logged onto our systems. The problem is that there is one row for each login. There are anywhere from 1 to 20 (or so) rows per user. I need to turn that into a spreadsheet with one row for each user.
In theory, the problem shouldn't be that difficult. Each user has a unique user ID, and the only math that's required in the merge is a simple adding of numbers from three columns to give a single total for each user.
So far, the only workaround I've been able to come up with is using the subtotal function based on the unique user ID which will at least isolate each user and total up their usage statistics. But it still leaves me with the problem of deleting the now uneccessary extra rows by hand, and then pastin the data back into a new sheet. Using vlookup, I think.
Combining Information From Multiple Tabs
Jul 19, 2006I have an excel file that contains 93 tabs, all with the
same type of information, and I need to take the information from each
tab and combine it so that it has all the information from all 93 tabs
in one.....without having to copy and paste each tab,
Combining Multiple Rows Into Single Row?
Apr 9, 2013I have a HUGE spreadsheet (1,000,000 rows) that contains a series of reports. The first row of the report contains all of the report identification numbers. The next 20-50 rows contains the report details, all in column A. Then the report ends with a cell in column A containing "[report_end]" and then on the next row the next report begins.
I would like to compress the report details all into a single cell in column A so that there is only one row for each report, sort of like this:
AA | BB | CC | DD
xyz
123
[end_report]
AA | BB | CC | DD
xyz
123
[end_report]
becomes:
AA xyz 123 [end_report] | BB | CC | DD
AA xyz 123 [end_report] | BB | CC | DD
Combining Data From Multiple Tabs Into One VBA?
Jun 29, 2014I need to combine data from multiple tabs into one tab. I can have up to 5 tabs with data that starts in column B. The number of rows will be different each time.
View 1 Replies View RelatedCombining Data From Multiple Worksheets
Jul 26, 2007would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
Combining Data From Multiple Sheets
Mar 11, 2008I have multiple sheets within a workbook, where the sheetnames will always be changing.
Inside of these worksheets there is data that will be different, the starting cell of the range is allways the same and the number of columns is constant. The number of rows changes. I need a code that will go to each worksheet, define and copy the range on that sheet and paste it onto a summary sheet, in order.
I would like to collect all the data and put it onto one sheet.
Combining Values In Multiple Lines
Apr 15, 2008I receive a monthly report containing a list of people, and how much is being paid for certain services. The company that sends me this list is preparing to adjust their rates and it will be retroactive back a few months.
The way they plan on doing it is by means of taking a credit back several months, then "re-paying" the correct rate. The main data will include the month for which the payment (or credit) is being made, the person's unique identifier, as well as the amount.
Here's a sample of what it would look like:
Name, ID, Month, Amount
John Doe, 123, 04012008, 25.00
John Doe, 123, 03012008, -20.00
John Doe, 123, 03012008, 25.00
John Doe, 123, 02012008, -20.00
John Doe, 123, 02012008, 25.00
So basically the above shows they paid $25.00 (correct rate) for April 08, then they took back $20.00 the prior two months (the old rate) and paid the correct rate right afterwards.
In what I need to do, this is going to be a lot of work. Is there a way to programatically merge the amounts given the member's unique ID as the "key field" as well as the same month? So it might look like the following:
Name, ID, Month, Amount
John Doe, 123, 04012008, 25.00
John Doe, 123, 03012008, 5.00
John Doe, 123, 02012008, 5.00
Just giving the sum of the amounts for a the given people in the same month?
I'm pretty good with VBA but this one is stumping me.
Combining Multiple Rows With Duplicate Information
Nov 24, 2009I have a sheet with over 1000 rows showing me every employee's benefit choices. It has multiple rows for each employee - one that indicates their health option, one that indicates their dental option and so on.
I'd like to combine them so I have one row that has columns for health, dental, etc...and then their options would be listed all in the same row. I've attached the original with the solution I'd like pasted below. I'm sure this isn't difficult but I'm having trouble figuring it out.
Powerpivot - Combining Multiple Tables And Calculating Across Them
Sep 7, 2013I'm trying to figure out whether or not something is possible in power pivot. I'd like to load two tables into powerpivot and then set up formulas that create calculated values across the two tables.
Here's a simplified description of what the tables look like. [URL] .........
The pivot table should join the two tables on Month and Category and allow me to create calculated values across the cost category, like this. Note it's filtered to a single cost category right now: [URL] .......
In this view it's filtered to all cost categories but i'd be looking to still maintains the right count of members (i.e. it doesn't inflate the numbers from duplicate records as you might get if you were to join the two tables in a sql database): [URL] ....
The actual tables I would use are quite a bit larger (too large for excel without pp), and have quite a few more of each type of category.
Would something like this be possible to do in powerpivot without having to do some data prep work in another app to join the two tables together?
Automatically Combining Data From Multiple Sheets?
Sep 28, 2013I have a time tracker that provides hours that employees clock in and out. It provides me with an excel document with all the employees time every two weeks as needed, however it does not total the hours from all previous spread sheets so that I can have a YTD (year to date) total of the employees hours worked and I need to be able to have this. Currently I am going through each and every spreadsheet and totalling them up. I have over 40 employees and this has become very time consuming to say the least.
View 1 Replies View RelatedCombining A Data Range From Multiple Workbooks?
Jun 16, 2014I am trying to create a macro to gather a data range from multiple files placed a folder and combine them into a single worksheet which can be easily totaled. I've used some similar code I did for another project to gather the data. It starts by listing the file name and then the data set (About 40 cells) below the file title. However, the data sets from each spreadsheet are filling themselves into a single column one after the other, whereas I would like to have them populate one worksheet's data in each column.
[Code]......
SummaryWorkbook.xls
Combining Like Items Across Multiple Columns And Rows
Mar 3, 2014[URL]...I was trying to use this thread's solution macro on my sheet that is only consolidating columns A, B, and C with a couple thousand lines and I've had it running for over an hour now. There hasn't been any errors but is there any particular reason that might be causing it to take longer than it should aside from having to go through a few thousand rows?
Basically, I only want 1 Version of data in Column B and any other rows that has a match in column B, i want to consolidate unique data from Columns A and C.
A B C
AB 123 AAC
BA 131 AAC
AB 222 CAA
Res:
A B C
AB 123, 222 AAC, CAA
BA 131 AAC
Combining Like Items Across Multiple Columns/Rows?
Jun 9, 2009This isn't absolutely necessary, but being able to do this easily would cut down on a lot of tedious jobs for me. Let's say I have a set of data like this (I tried to space it out as best I could to give the idea):
View 3 Replies View RelatedCombining Sheets From Multiple Workbooks Into Master
Sep 17, 2009I have several workbooks that supervisors in a call center use to grade calls for quality.
Each supervisor has a seperate workbook, and after scoring the call, the supervisor runs a vb script that copies all of the data from the worksheet "observation" onto "sheet1" for storing the data.
So now I want to use another workbook to:
1. Copy each sheet1 from all of the supervisor workbooks onto a sheet named "cumulative" in a different workbook.
In a perfect world it would also:
2. Keep a count of how many observations were done by each supervisor each day
3. Keep a count of how many have been done week to date
4. Keep a count how many have been done total since January 1, 2009
Each workbook is kept on a network drive at s:supervisorsqadata and named - for example QAformMelissa.xls
I'm okay with keeping the master sheet in the same directory if that makes it easier to accomplish this.
Combining Parts Of Multiple Worksheets Onto Worksheet
May 12, 2006I am trying to do is have a worksheet that gets its information from other worksheets within the same workbook. Some of the worksheets that it gets its data from are web queries, and as such change on occasion (columns stay the same but rows get inserted or deleted as data on the web page that it is importing changes). Also due to this being an import I can not change directly the format that comes onto the sheets (ig split into different columns etc). Much easier described within the example as I am not sure of the words to best describe the end result I am looking for. A copy of a smaller version of what I am doing is attached
View 3 Replies View RelatedCombining Some Of Rows Values Based On Multiple Criteria (2)
Apr 18, 2014I have a table based on transport numbers who sometimes have doubles. Example:
Number Postcode Value1 Value 2...
106200 8500 10
106200 8500 5
106200 8600 6
106201 5500 4
106202 4000 1
106202 4000 1
So it works as following:
A transportnumber can have multiple instances of itself, such as 106200. This transport number can also have multiple instances where the postcode is the same. These are the rows i want to combine
So shortly:
Transportnumber double/triple...+ Postcode double/triple...= combine these rows.
if only transport number is double, or only postcode, then dont combine. I want it to combine 2 columns of values, one will b the kgs, other one a price.
So example of end result for 106200 would be
106200 8500 value+value (these 2 rows matched so it combined the 2 values i want it to)
106200 8600 value ( this was unique so it stays unique)
Combining Data Across Multiple Sheets Onto One Summary Sheet
Jul 29, 2014Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
Excel Combining Data From Multiple Worksheets Into A Report?
Jan 21, 2014This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
Excel 2007 :: Combining Data With Multiple Row Entries
Mar 7, 2012I'm using Xl 07 and need to combine two sheets of contact info and have them sorted alphabetically.
Each contact entry takes the follwing form(comma's denote new columns)
55555, Name , John, Smith, Tel: , 555-555-5555
ID , Company, XXX , , Email, xxxxxx
Each sheet has a list of 200 or so entries about 400 rows long. The entries on each sheet are sorted in alphabetical order. the names also alternate alphabetically from sheet to sheet. So when i look at the entries on my final sheet, the 1st will be from sheet1 the second from sheet2 the third from sheet1 and the fourth from sheet2 etc.
I'm not sure whether I should build a new list by pulling alternating entries from each sheet or just copy one list below the other and then try to sort it somehow.
Combining Multiple Excel Files To One Workbook But Different Worksheets?
Jul 17, 2013I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
View 2 Replies View Related