Combining A Data Range From Multiple Workbooks?
Jun 16, 2014
I am trying to create a macro to gather a data range from multiple files placed a folder and combine them into a single worksheet which can be easily totaled. I've used some similar code I did for another project to gather the data. It starts by listing the file name and then the data set (About 40 cells) below the file title. However, the data sets from each spreadsheet are filling themselves into a single column one after the other, whereas I would like to have them populate one worksheet's data in each column.
[Code]......
SummaryWorkbook.xls
View 1 Replies
ADVERTISEMENT
Jan 6, 2009
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
View 9 Replies
View Related
Mar 9, 2009
I have multiple WB's all with the same format in a single folder. I need a button to copy all the text from each WB into a single Master WB that has the same format. There are 3 sheets in each client WB corresponding to three sheets in the Master WB. Each client WB has a number of rows (or none) on each sheet and when they are copied to the Master they need to paste consecutively and into the corresponding Master sheet.
Something like this:
Copy rows from [WB1].Sheets 1, 2 and 3 (starting at a:4, columns A-Q). Then paste to corresponding [MasterWB].Sheets 1, 2 and 3 (at a:4, columns A-Q) then repeat with Next Book.
I hope thats clear enough. The Client WB's are all named "stats [name].xls" with 1 hidden sheet (to populate lists) and 3 sheets named "POC", "ISS" and "ECS" repectively. The Master WB is named Stats.xls with the same sheet names as the Client WB's.
The following code was written for me by a helpful member of this forum but it only copies the first sheet of each Client WB. When i tried to duplicate and modify it to copy the second and third sheets I could not get it to copy from the second/third sheets and it meant 3 buttons/3 steps/3 times the confusion.
Sub Report()
a = 1:
st:
If Sheets(5).Cells(a, 1) = "" Then GoTo endd
Path = Sheets(5).Cells(a, 1).Text
If Dir(Path) = "" Then
w = MsgBox(Path + " Is Not A Valid Path / File", , "REPORT")
a = a + 1: GoTo st
End If
If there is anyone who could help me with this I would very much appreciate it. I am only a basic user of Excel and VBA is still new to me. Adding modules and understanding basic commands is as much as I know at the moment.
View 9 Replies
View Related
Sep 17, 2009
I have several workbooks that supervisors in a call center use to grade calls for quality.
Each supervisor has a seperate workbook, and after scoring the call, the supervisor runs a vb script that copies all of the data from the worksheet "observation" onto "sheet1" for storing the data.
So now I want to use another workbook to:
1. Copy each sheet1 from all of the supervisor workbooks onto a sheet named "cumulative" in a different workbook.
In a perfect world it would also:
2. Keep a count of how many observations were done by each supervisor each day
3. Keep a count of how many have been done week to date
4. Keep a count how many have been done total since January 1, 2009
Each workbook is kept on a network drive at s:supervisorsqadata and named - for example QAformMelissa.xls
I'm okay with keeping the master sheet in the same directory if that makes it easier to accomplish this.
View 8 Replies
View Related
Dec 13, 2013
I recieve a data file on a monthly basis. Is there a way to take all of the monthly worksheets and combine into one workbook without doing a copy paste every month?
View 1 Replies
View Related
Feb 13, 2009
I'm not sure if what I am trying to accomplish is best done using the LOOKUP function. It occurred to me that a table might be the best way to go but I'm not sure exactly how to go about it. The LOOKUP function I am using contains way too many variables and thus has not yet been correct in displaying the proper info.
What I would like to do is create a workbook with a table, say column "A" is the Style/Model product, column "B" would be the pricing information, and column "C" would be the Product Identifier......
View 2 Replies
View Related
Jul 13, 2012
I have to compare and combine data from multiple files and combine it into 1 master spreadsheet. I have attached a sample file. It is in bulgarian, but the language is of no importance. An example of the file: it contains data about repair maid on a truck. First column is just the number of the repair type and shall be filled upon completion of the table. the second column is the name of the repair itself. the 3rd column is the date the repair was made. the 4th column - the total work hours the repair was made. Some repairs were made more than once and thus the merged cells 3 to 9 in column B. I have 30 trucks which have more or less the same repairs, just a different number of each repair. A sample file of 1 truck is attached, called 1truck.
The master spreadsheet should be of the same type as the example, however showing data for all trucks (from different files) next to each other. (the attached "alltrucks") As you can see there are repairs done only on some trucks, and others are done multiple times. The master sheet should have all possible repairs from all trucks. So far I've been doing it manually, but takes way too much time...
View 1 Replies
View Related
Apr 2, 2014
I jst need to console data from different workbooks to one worksheet. There are 30 workbooks & each workbook contains one worksheet name as Data. The work i am currently doing mentioned below step wise
1) Open workbook
2) Apply filter on whole data
3) Select dates from "J" Column (E.g 02/10/2014 to 02/20/2014)
4) Then Copy whole filtered data
5)Paste into New workbook
6) Open another worbook
7) repeate Step # 2,3
8)Then paste whole data in below the first data New Workbook (In which we have paste the first data below that i will paste this data)
These steps i have to do manually it takes almost 1hr daily After pasting all 30 workbooks data in one workbook i have to make pivot of it & sent it to my Manager. What i need
I jst want a excel macro that will ask me date range from which i have to pull data from all 30 workbooks.
Once i gave date range will jst click on button say extract or pull. It willl console whole 30 workbooks data from the given date range in a one worksheet.
View 13 Replies
View Related
Jun 29, 2014
I need to combine data from multiple tabs into one tab. I can have up to 5 tabs with data that starts in column B. The number of rows will be different each time.
View 1 Replies
View Related
Jul 26, 2007
would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
View 9 Replies
View Related
Mar 11, 2008
I have multiple sheets within a workbook, where the sheetnames will always be changing.
Inside of these worksheets there is data that will be different, the starting cell of the range is allways the same and the number of columns is constant. The number of rows changes. I need a code that will go to each worksheet, define and copy the range on that sheet and paste it onto a summary sheet, in order.
I would like to collect all the data and put it onto one sheet.
View 9 Replies
View Related
Sep 28, 2013
I have a time tracker that provides hours that employees clock in and out. It provides me with an excel document with all the employees time every two weeks as needed, however it does not total the hours from all previous spread sheets so that I can have a YTD (year to date) total of the employees hours worked and I need to be able to have this. Currently I am going through each and every spreadsheet and totalling them up. I have over 40 employees and this has become very time consuming to say the least.
View 1 Replies
View Related
Jul 29, 2014
Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
View 14 Replies
View Related
Jan 21, 2014
This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
View 1 Replies
View Related
Mar 7, 2012
I'm using Xl 07 and need to combine two sheets of contact info and have them sorted alphabetically.
Each contact entry takes the follwing form(comma's denote new columns)
55555, Name , John, Smith, Tel: , 555-555-5555
ID , Company, XXX , , Email, xxxxxx
Each sheet has a list of 200 or so entries about 400 rows long. The entries on each sheet are sorted in alphabetical order. the names also alternate alphabetically from sheet to sheet. So when i look at the entries on my final sheet, the 1st will be from sheet1 the second from sheet2 the third from sheet1 and the fourth from sheet2 etc.
I'm not sure whether I should build a new list by pulling alternating entries from each sheet or just copy one list below the other and then try to sort it somehow.
View 1 Replies
View Related
Dec 2, 2008
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
View 9 Replies
View Related
Jan 29, 2014
I have a workbook with two different tabs. On one tab, I have a spreadsheet that lists business names on first column, address # on second column, address street on third column.
On the second spreadsheet, I have address # on first column, address street on second column.
What I want to do is create a column before the first on the second spreadsheet, titled business names, and then have Excel find and match the address # and address names that are the same on the first and second workbook, and for those that are common, insert the business name into the new column on the second spreadsheet.
EX:
Spreadsheet 1 -
Joe's Pizza | 67 | Smith Street
I want it to find 67 Smith Street, and insert Joe's Pizza in second spreadsheet.
View 14 Replies
View Related
Jul 17, 2008
I had a Costs file which had a sheet per product (about 30) and a totals sheet with a basic 3D sum in each cell.
Columns A:E held the cost codes and descriptions and then column F onwards were a column per month showing any associated costs for a six year plan.
This file was cumbersome and not user-friendly, as they then linked into the 30 different product files, so I've effectively moved every sheet from this file into the relevant product file, so the cumbersome Costs file no longer exists.
This works much better. However, I still want a summary page to show me the total costs of all of these products.
Can I do some kind of SUMPRODUCT, or INDEX MATCH to take the cost for Code 13011234 for Jan 08 from each of the 30 files, without having to make a copy of each sheet or write a long winded suma+sumb etc?
NOTE: Not all sheets contain all codes (although they did for the previous 3D sums). My master list does, but I don't want any errors if code 13011234 is not found on one of the sheets.
Also, all of the sheets are now called COSTS within each of the individual files.
View 9 Replies
View Related
Jun 5, 2013
Collapsing function: I want to select cells that I want merged, and have them COLLAPSE into the first cell selected calls
Combining function: OR Select the cells I want merged, and allow me to pick a destination cell for the result COMBINE
I would like to add this functionality to all my spreadsheets in the future.
Excel-Forum-Data Collapsing sample.xls
View 1 Replies
View Related
Jul 6, 2009
I have several workbooks (called Cons_age0, Cons_age3, Cons_age6 and Cons_age12) that I would like to combine into one workbook called Cons. Each of the previous workbooks should now be a worksheet within Cons by their name.
View 6 Replies
View Related
Sep 13, 2009
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
View 4 Replies
View Related
Feb 15, 2009
In a folder I have a group of approx 30 workbooks which each contain up to 200 worksheets. All the worksheets contain a set of formulas in the range FR1:FT30. I now need to update these formulas.
I have a precedent file called prec.xls & i need to copy the range FR1:FT30 from this file to all the worksheets in workbooks i have described above.
View 9 Replies
View Related
Aug 31, 2007
Currently i am looking for a macro to combine information in different workbooks but on the same sheetname. In every single workbook i have a worksheet with a single row of information which has to be added to one big file. In stead of doing all 200 manually i would like vba to select this particular range, copy it and paste them under eachother in one single worksheet in a different workbook. Is this possible?
for examble book 1, sheet 1 has all the data in rang a1 till z1. this has to be copied to the masterfile under a1. this goes on from book 1 till book 200.
View 9 Replies
View Related
Nov 11, 2013
I want to take Book 1 & Book 2 then combine them into one new book (Book 1 & 2 combined) only if data matches. So in the this example if columns A,B,C,D match Columns H,I,J,K then append the matching row from Book2 to the end of the matching row in Book1 and then save in Book 1 & 2 combined. So if I opened Book 1 & 2 combined and then started a macro that did it automatically. i have tried several times but got know where.
Book 1 & 2 combined.xlsxBook1.xlsxBook2.xlsx
View 2 Replies
View Related
Jul 12, 2014
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
View 4 Replies
View Related
May 14, 2014
I track distribution using 1 workbook for each sales rep. Each workbook has a separate worksheet (scorecard) for each of their locations showing which of our products are used in that location, for various functions. Each of the locations has a segment (bar, nightclub, casual dining, etc.), and a class (AA, A, B, etc.). All of the scorecards are identical, and are in the same file folder on our shared drive.
Sample:
Location A Class:AA Segment: Sports Bar Rep: John Smith
Product: Product X Product Y Product Z
Well: 1 0 0
Back Bar: 0 1 0
Cocktail Menu: 0 1 1
I was unable to find an HTML maker so this is not an actual sample but what I'm looking at. The above data indicates that for location A (Sports Bar, Class AA), Product X is used as the well, Product Y is on their back bar and their cocktail menu, and Product Z is not used at this location at all.
I need to set up an analytic workbook where I can sum data based on multiple and grouped criteria, and for multiple reps ie- display a scorecard that shows totals for nightclubs and sports bars, class AA, A, and B, for a particular rep; OR display a scorecard that shows totals for nightclubs, class A for a group of reps. Ideally I would like to do this using drop down menus that allow the user to select multiple criteria in each of the drop downs, having the data auto-populate based on those selections.
View 2 Replies
View Related
Apr 11, 2012
I have a problem with a sumproduct formula. The formula works however both workbooks have to be opened at the same time or it will not update and you get a #VALUE! error. The formula is:
=SUMPRODUCT(SUMIF([Mthlydta.xlsx]FEB!$DZ$11:$DZ$65536,Cash,[Mthlydta.xlsx]FEB!$DP$11:$DP$65536))
I have also tried using
=SUMPRODUCT(INDEX([Mthlydta.xlsx]FEB!$DZ$11:$DZ$3000,MATCH(Cash,[Mthlydta.xlsx]FEB!$DP$11:$DP$3000,0),1))
But it only finds the first value in the list Cash. Which the list of accounts for cash will grow because we are expanding and have several mergers going on.
View 1 Replies
View Related
Aug 26, 2008
='NAME OF SHEET'!$#
where # equals the exact cell in the other sheet I want to copy. I'm also starting to realize that with this formula, Senior Monkette and I could take Dingleberry and Bliddiboo and combine them into a more powerful and robust spreadsheet (called "Voltron!").
1. If we're going to be sending Voltron! to the client, all I would need to do is password protect, then hide the Dingleberry sheets so that the client doesn't look at them accidentally, right?
2. If I hide and protect the Dingleberry sheets, the cell information will still show up on the Bliddiboo sheet, right?
3. Since Senior Monkette isn't as Excel-savvy as I am, the entire process would have to be as painless as possible. What I was thinking of doing was having one master Voltron! where Senior Monkette could make her changes and updated. Then every week, save the entire thing, protect/hide the Dingleberry sheets, and then save a copy as a separate Voltron! file, marked by the date, which then gets shipped off to the client. Is there a macro I can run that will do that all with the press of one button? (And how do I install macros?)
View 10 Replies
View Related
Aug 6, 2014
I have multiple excel files from which I would like to copy specific ranges to a master file. The row should add up to the previous rows. From this side I have no problems things work fine. The problem is to copy the header which remains the same data to the top of the master file. Currently the macro I use overwrite the first line of the master file. So I loose the date from one of the excel files.
View 3 Replies
View Related
Apr 28, 2008
I have the following code that works properly, Copy & Paste Same Range On Protected Sheet From Multiple Workbooks
Sub RunCodeOnAllXLSFiles()
Dim lCount As Long
Dim wbResults As Workbook
Dim wbCodeBook As Workbook, book1R As Range
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch
'Change path to suit...............
View 2 Replies
View Related
