Combining Data From Multiple Tabs Into One VBA?
Jun 29, 2014I need to combine data from multiple tabs into one tab. I can have up to 5 tabs with data that starts in column B. The number of rows will be different each time.
View 1 Replies
ADVERTISEMENT
Combining Information From Multiple Tabs
Jul 19, 2006I have an excel file that contains 93 tabs, all with the
same type of information, and I need to take the information from each
tab and combine it so that it has all the information from all 93 tabs
in one.....without having to copy and paste each tab,
Pivot Table Combining Several Tabs
Aug 22, 2007Good Afternoon. I am attempting to create a pivot table using 4 columns from 5 different tabs. I have created pivot tables before using one tab and they are pretty easy. However, I have been working on this for over an hour and I am getting nowhere. Can someone tell me how to put all five tabs into one pivot table? The columns are all in the same order on each tab. They are as follows: System, Management Area, Schedule Date, WO Type. I want the pivot table to have System and Management area on the left side, date on the top row and counting the number of WO Types.
View 6 Replies View RelatedCombining Data From Multiple Worksheets
Jul 26, 2007would anyone be able to write the code that will combine the data from all rows from all worksheets within a workbook. i've struggled with this one....
here is the deal:
all worksheets have the same columns and column headings but differnet amount of row counts. the width of the sheets is to Column "M" or "13" and there are no blank columns.
There is no need to have the columns headings repeat within the compiled worksheet.
the amount of worksheets will vary depending on when i run it so it will not be able to use specific naming conventions.
Combining Data From Multiple Sheets
Mar 11, 2008I have multiple sheets within a workbook, where the sheetnames will always be changing.
Inside of these worksheets there is data that will be different, the starting cell of the range is allways the same and the number of columns is constant. The number of rows changes. I need a code that will go to each worksheet, define and copy the range on that sheet and paste it onto a summary sheet, in order.
I would like to collect all the data and put it onto one sheet.
Automatically Combining Data From Multiple Sheets?
Sep 28, 2013I have a time tracker that provides hours that employees clock in and out. It provides me with an excel document with all the employees time every two weeks as needed, however it does not total the hours from all previous spread sheets so that I can have a YTD (year to date) total of the employees hours worked and I need to be able to have this. Currently I am going through each and every spreadsheet and totalling them up. I have over 40 employees and this has become very time consuming to say the least.
View 1 Replies View RelatedCombining A Data Range From Multiple Workbooks?
Jun 16, 2014I am trying to create a macro to gather a data range from multiple files placed a folder and combine them into a single worksheet which can be easily totaled. I've used some similar code I did for another project to gather the data. It starts by listing the file name and then the data set (About 40 cells) below the file title. However, the data sets from each spreadsheet are filling themselves into a single column one after the other, whereas I would like to have them populate one worksheet's data in each column.
[Code]......
SummaryWorkbook.xls
Combining Data Across Multiple Sheets Onto One Summary Sheet
Jul 29, 2014Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
Excel Combining Data From Multiple Worksheets Into A Report?
Jan 21, 2014This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
Excel 2007 :: Combining Data With Multiple Row Entries
Mar 7, 2012I'm using Xl 07 and need to combine two sheets of contact info and have them sorted alphabetically.
Each contact entry takes the follwing form(comma's denote new columns)
55555, Name , John, Smith, Tel: , 555-555-5555
ID , Company, XXX , , Email, xxxxxx
Each sheet has a list of 200 or so entries about 400 rows long. The entries on each sheet are sorted in alphabetical order. the names also alternate alphabetically from sheet to sheet. So when i look at the entries on my final sheet, the 1st will be from sheet1 the second from sheet2 the third from sheet1 and the fourth from sheet2 etc.
I'm not sure whether I should build a new list by pulling alternating entries from each sheet or just copy one list below the other and then try to sort it somehow.
Checking Multiple Column Data Across Two Worksheets And Combining Them Into One
Dec 2, 2008what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date
1 3 500 12/01
2 4 900 01/01
Sheet2:
Reference No. Line Item No. Quantity PersonInCharge
1 3 10 Kim
5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge
1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
Combining Contents Of Multiple Cells Into 1 Cell - Without Losing Data
Jun 5, 2013Collapsing function: I want to select cells that I want merged, and have them COLLAPSE into the first cell selected calls
Combining function: OR Select the cells I want merged, and allow me to pick a destination cell for the result COMBINE
I would like to add this functionality to all my spreadsheets in the future.
Excel-Forum-Data Collapsing sample.xls
Getting Website Data - Multiple Tabs
Mar 8, 2013I've only recently ventured into the VBA scripting and am finding it quite exciting. After doing some trivial stuff, I'm trying to work with websites. Currently, I'm trying to pull data off of a website which poses a form which has to be filled first. I've been successful in filling the form and clicking submit, through the code, but the site opens the results in a separate tab in IE. I am unable to make it go to that tab and copy-paste data from there.
Secondly, instead of just blindly copy pasting, it would be better if the data is pasted in a more readable format (as on the website). The following code is plainly copying and pasting the data as-is and hence rendering it unreadable:
VB:
.ExecWB 17, 0
.ExecWB 12, 2
.PasteSpecial Format:="Text", link:=False, DisplayAsIcon:=False
Importing Data From Multiple Tabs
May 6, 2009I have an excel spread sheet with about 300 tabs. each sheet has the same column fields..I need to pull certain column fields ( the same fields ) out of each tab and export them to another spread sheet.
View 6 Replies View RelatedMacro For Multiple Tabs From A Data Set
Sep 10, 2007I'm not very good with macros and I need to create a macro that copies data from one excel worksheet into multiple other worksheet tabs in the same workbook. I have 8 columns and thousands of rows of data. The spreadsheet is sorted by column E.
In column E, there are about 25 different values going down throughout the spreadsheet. I would like the data for each of these Column E categories to be copied over to a new tab in the spreadsheet with the tab name as the value in E. So in the end there would be the main tab, and then 25 new tabs with the filtered data. Does anyone already have a macro that will do this?
Summarizing Data From Multiple Tabs?
Dec 26, 2012I have a spreadsheet with 12 tabs, 1 for each month in the year. On each tab I have employee names (column A), followed by the premium they pay for their health insurance (column B). I'm attemting to create a list of each employee and how much they paid for helath insurance over the year. Since employees come and leave thorughout the year, the lists aren't the same on each tab. However, I was able to create a master list of all possible employees and placed this list into a new tab.
I'm vaguely farmiliar with the SUMIF function and I believe that this would be the best approach, or some possibly sort of vlookup.
Compiling Data From Multiple Tabs
Sep 3, 2013I've been asked to compile and sum weekly sales data. The problem is that the data was supplied in 52 separate tabs, for each week of the year (I don't know who on earth thought that would be the most appropriate way to send the data).
Is there any quick way to import all the data from each tab into one worksheet? The data is laid out the exact same way on each tab. All the row and column headings are the same, and in the same cells. Only the numbers are different (obviously).
Combining And Rearranging Data Records From Multiple Worksheets To A Single Worksheet
Sep 13, 2009I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.
Populating Data Table From Multiple Tabs
Dec 6, 2012I am trying to populate a large data table with data sourced from multiple tabs.
Each of the tabs is, for the most part uniform.
They have column labels of "Invoice Number", "Schedule Dates," and "Amount". Their cell references are A6, B6, and C6, respectively.
Is there any way to congregate this data into one massive data table? It doesn't matter the order of the data table. I will be using sort/sumifs/pivot tables to analyze the data.
I cannot copy and paste as there is too much data that changes on a daily basis.
Summing In One Summary Tab Data From Multiple Tabs?
Jan 14, 2014I have a summary tab in which I am trying to sum data based on specific variables from 30 other tabs in the worksheet
- In the summary tab, I have months (one year worth) over the top row and consultant names in the first column
- Each other tab represents a project
- I want for consultant 1 in summary tab, to have:
For january, the sum of dollars spent in january in each project (so across all tabs)
Same for february to december.
I have attached an exemple Note that the consultant names will always have the same syntax but will not necessarily be in the same cell in each tab.
Split Data Table Into Multiple Tabs?
Jul 12, 2012I am working with a large table of quite simple data in the following format.
Ref1 SurnameInitialsDOL1 Reference2
Zz719147GLAWSJ07/04/19780271947X
YA414253CDORCE07/04/19870282179F
I need to split up the "master" table so that for all rows where DOL1 falls with a year range of e.g 6th April - 5th April (in any year) then this row is moved or copied into a new tab based on the year range.
i.e. The first row should appear in a new tab for the range 6th April 1978 - 5th April 1979.
The marco should be ale to create and name new tabs. The tab name will be 78_79.
The second row should appear in the 87/88 tab.
I have several thousand rows of data with dates ranging from 1978 - 2012 so there should be tabs populated for every year from 78-2012.
Sorting Data In Multiple Tabs By Group
Dec 31, 2012I have imported data into excel arranged as per the following and there are separate tabs per year. I a trying to summarize and phase the balances per client..i.e 07,08,09,10,11,12.
Therefore if client x balance in 2007 = 10, 2008=11, 2009=10, 2010=2, 2011=3 and 2012 = 5 and so on...then total the balance owed as of now and also phase it as illustrated below. I've tried vlook up's?
Client
Code
01Jan07-
31Jan07
01Feb07-
28Feb07
[Code] .....
Button To Pull In Data From Multiple Tabs Onto One Tab
Feb 3, 2008I had a friend attempt to help me with this issue but he couldn't figure it out. He suggested that I tried asking around here.
Here is what I am trying to accomplish:
(I am happy to email anybody the spreadsheet to help out with this description)
1. There are two spreadsheets. One spreadsheet with about 25 tabs (one for each store number) and one spreadsheet with one tab and about 1400 lines of information that is sorted by store number. To preface, this 1400 line spreadsheet can be 900 lines one month and 2500 another month, so it fluctuates.
2. From this spreadsheet sorted by store, I will highlight, cut and paste into the corresponding store tab on the first spreadsheet. Also, at any given month, the information fluctuates, it can be 15 lines for one store one month and another month it could be 5.
3. Once I am done cutting and pasting it all into each seperate tab, I have a 26th tab that I am looking to create a button that will then pull all that information into the 26th tab.
I know - first question is why would you want that? You already have all the information from that original spreadsheet. Well, in these store tabs, I have everything perfectly formatted a certain way and I only really cut and paste the information that I need from the 2nd spreadsheet.
I have a spreadsheet that my friend claims he got close to working it out.
Just to add, I would need this button to take into account that the information in each tab fluctuates and also that it is easy to add a tab if I add stores.
How To Create IF / AND Formula Draws Data From Multiple Tabs
May 21, 2014Is it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
Pulling Data From Multiple Data Tabs?
Aug 30, 2012I have a spreadsheet with multiple data tabs feeding a few summary tabs.
For this question I will deal with one summary tab and two data tabs, one data tab for sales and one data tab for service. On the summary tab, I want to look at vehicles sold during a certain time period-(looking to the sales tab). For each of the records in the sales tab that match the date range, I need to count the repair order activity on the service tab. The key between the summary and sales tab is the sales date, and the key between the sales and service tabs is the vehicle serial number.
I currently have multiple columns on the sales tab to perform the counts from the service tab, thus allowing me to pull the information to the summary tab. Problem is that the spreadsheet has over 2 million calculating cells and tends to take excessive amounts of time to recalc.
Selecting Data From Multiple Tabs Based On Dropdown Selection
Apr 10, 2013I have 5 cities and each city has a set of data in separate tabs. Right now i have data pulled for all 5 cities in a single sheet but its too cramped up..
I want to use a drop down list (data validation) and if any of the 5 cities are selected in the drop down, the data from that particular city (tab) should be pulled up. This way my sheet size will be reduced 5 time which will look good.
A common v lookup wont work because the data has to be pulled from 5 different tabs for 5 different cities.
Copy Column Data From Multiple Tabs Onto Specified Tab / Transpose / Repeat
Mar 25, 20141. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
Combining Multiple Cells In Multiple Worksheets In Multiple Workbooks Into One Table
Jan 6, 2009I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
Create Multiple Sheet Tabs From Multiple Cells
Jun 22, 2006Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
Combining Multiple IF / AND Formulas?
May 26, 2014Is it possible to combine the following three formulas into one formula?
=IF(AND(H5>59,(I5<5),(J5<15)),("Close Out"),(""))
=IF(AND(H5>59,(I5<15),(J5<5)),("Close Out"),(""))
=IF(AND(H5>55,(I5<10),(J5<3)),("Close Out"),(""))