Ranking Values In Non Adjacent Cells?

Mar 22, 2014

I have a results table that i want to be able to rank into a simple list 1 - 4. However the results are not in cells beside each other.

I tried using a helper column and then the Large function, however cannot get it to work.

I have attached an example sheet, and in column L4 - L7 i would like to put the team names (taken from column B) into the right order from the results shown.

I have to replicate this over a number of different pools in a number of different divisions. This is just one pool.

View 10 Replies


ADVERTISEMENT

Ranking Values And Ranking Duplicates The Same Rank

Mar 30, 2014

Ranking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.

Example:
20
18
18
15
12
11
11
9

The ranking I am looking for is:
1
2
2
3
4
5
5
6

View 2 Replies View Related

Generating Values In Number Of Cells Based On Adjacent Cell Values

May 22, 2014

What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username

The following is my code

[Code] ....

Above code runs without errors but does nothing.

View 4 Replies View Related

Paste Values In Selected Non-adjacent Cells?

Jul 5, 2013

Sometimes I need to copy the values in adjacent/continuous cells and paste them into the cells which I select and which are not adjacent/continuous.

Like for example i want to copy values from A1:A4 and paste in C1,C4,C7,&C10

View 2 Replies View Related

Compare Two Values In Two Adjacent Cells Using Vlookup

Mar 4, 2010

jane....kaser...highschool......A
jack....Anderson....college.....B
Jill....Lovin.....college.......C

if both jack+anderson in a same row adjacent cells
as per in my table it should return column 4 value (A)
can I use VLOOKUP?
is there another way ?

I want to search a block of two adjacent cells in a table and return its forth column value.

View 9 Replies View Related

Use Values In Adjacent Cells In Formulae Reference

Nov 24, 2007

I'm trying to write a function that returns, from a different sheet, the value in column C and row 6*current row.

For example, if the function is typed into cell B5 in Sheet 1,
the resulting value would be whatever is in cell C30 in Sheet 2

I tired the following but it gave me an error
=Sheet2!&"C"&(ROW()*6)

View 2 Replies View Related

Conditional Formatting Based On Top 10 Values In Adjacent Cells?

Jun 3, 2014

I have a matrix in excel to show % and $ for multiple columns - set up like this:

Rows Part 1 Part 2 Part 3
Criteria 1 % $ % $ % $
Criteria 2
Criteria 3

the $ columns are conditionally formatted to highlight the top 10 values on the matrix. is there a way to have the corresponding % cells also highlighted? The % and $ aren't both top 10, so the % would have to be highlighted based on the $ top 10 cells.

View 6 Replies View Related

Finding Sum Of Cells That Have Specific Values In Adjacent Cell?

Apr 4, 2013

I have a list of data:

2
140

1
660

10
140

0.92
660

2
130

0.18
660

4
510

0.44
820

4
510

I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)

View 2 Replies View Related

Compare Values From Different Worksheets And Write In Adjacent Cells

Aug 17, 2013

I am new to programming in excel but am looking to make a VBA that allows me to see if a value entered exists in a second spread sheet. If it does then write a comment next to it. If not then write a different comment.

This is what my spread sheet currently looks like:

Sheet1 contains all the important information:
A
B
C
D
E
F

Load
PO
Delivery
Email
Item
ShipCon

1
3456
6543
Y
5219

5129

2
2345
5432
Y
1234

4321

Sheet2 contains the items that contain a shipping condition. There are two shipping conditions Fragile and non-Fragile. The list is of Fragile items.

Item

5219

1234

I am looking for a way to have it set up that when i enter an item number in sheet in 1 it searches in sheet 2 to see if it is fragile, if it is then returns, in sheet 1 column F next to that specific item 'Fragile'. If it doesn't find it in the list returns 'non-fragile'.

View 4 Replies View Related

Return Values Of Adjacent Cells When Condition Is True Omitting Values Where Condition Is False?

Jan 15, 2014

Here's a simplified example:

ColA
ColB
ColC

Row1
A
Y
A

Row2
B
N
D

[Code] .........

I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.

The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.

View 7 Replies View Related

Lookup Column Values On Another Sheet & Return Adjacent Cells

Jun 11, 2008

Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.

We have two worksheets, sheet a and sheet b

compare sheet b, column c (email addresses) to sheet a, column x, (email addresses).
If they match, move sheet a, columns d, e, f, g, and h to sheet b.

View 3 Replies View Related

Lookup/Match Column Values On Another Worksheet & Return Adjacent Cells

Jul 1, 2008

I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.

View 5 Replies View Related

Adjacent Cells - Search For Specific Values And Find The Total Number Of Instances

Jan 30, 2014

Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.

View 14 Replies View Related

Ranking With Duplicate Values While Ignoring Zeros And Negative Values

Mar 26, 2014

I'm trying to rank the values in cells S32:S38 in ascending order while ignoring zeros and negative values. I also need to rank duplicate values with a unique ranking, so that no ranking value is repeated. I tried the formula below, but the ranking values start at "2" instead of "1" and I can't figure out how to fix it.

Formula:

[Code] ....

View 2 Replies View Related

Copy Non-adjacent Cells In A Row From One Spreadsheet To Adjacent Rows In Another

Jan 5, 2014

I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.

The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:

Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)

The data in the sheets are not in that order, of course.

That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)

Here is the code snippet where the copying is done:

Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long

[Code] ........

ExitTheSub:

Application.Goto Sheets("KMARollup").Cells(1)
End Sub

I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.

View 2 Replies View Related

Ranking Values 1 To 100?

Jan 22, 2014

I have a data base of numbers Columns C to K with values from Row 2 to 3766. I want to rank each of these columns by value 1 to 100. However, some of the columns will assign 1 to the highest value and 100 to the lowest. In other columns it will be reverse, 1 is given to the lowest value and 100 to the highest. I can do a rank by percentile but that's not the scoring I'm looking for. Also don't know how to reverse assignment of high or low values. One further note, some of the cells are blank in which case I want to assign a neutral score of 50.

View 2 Replies View Related

Copy Cell Values In One Cell Based On Value Of Adjacent Cells

Feb 20, 2014

What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)

is it possible ( with a command button) Sample attached

View 4 Replies View Related

Selection And Ranking 10 Highest Values

Jan 29, 2010

I'm trying to let the code described down below to select 10 of the highest values and give them a ranking in the next column using the letters A to J.

My query;

The code gives all 10 of the highest values the ranking letter J instead of A to J, so what's going wrong?

Also, is there a way to simplify this code so it will be easier to maintain and run quicker?

View 6 Replies View Related

Ranking Values Until Change In Another Cell

Oct 6, 2009

I have 2 lists.

I want to rank scores/ratings in list 2 and rank against all those cells that have the same value.

I will upload an example.

In the example you will see column A and column B.

I need a Rank for all those cells in B for 17:45, 18:15, 18:45 etc.

View 9 Replies View Related

Vertical Ranking Of Unique Values

Feb 20, 2010

I've been trying to figure where I've gone wrong on this one for a couple days. Maybe you guys can assist.

I have a data entry table:

DateAgeGenderPositionSportAthleteBike 5 min (Miles) 1/2 BW Pull Up1/8/200920-26MaleChangerRB_84Brett Nena8351/8/200927-33MaleJackRB_83Sha Pet3381/8/200927-33MaleGasRB_82Mik Malf1551/8/200948-54MaleGasMWR_56Dou New2321/8/200920-26MaleChangerRB_82Cha Avr12401/8/200927-33MaleChangerRB_82Dan Kaid6181/14/200927-33MaleChangerMWR_00Ryan Lang7121/14/200927-33MaleJackRB_83Sha Pet6331/14/200920-26MaleCarrierMWR_00Don Mar9152/8/201020-26MaleChangerRB_84Brett Nena8121/12/201041-47MaleCatchMWR_00Jeff Sea715

I have an area for each exercise where I am ranking the athletes average score. In these ranking areas I did not want the athlete name to show up more than once so I decided to use this formula in the names column below:

{=IF(ROWS(L$2:L2)

View 9 Replies View Related

Ranking Values Against Multiple Criteria

Oct 7, 2009

I have successfully been able to rank items using two criteria but I'm unsure of the syntax for adding a third or fourth set. I'm new to the use of Sumprodoct.

I have attached a file. Where column C and E have the same value, I want Excel to look at column F and assign a rank (formula is in column K) in ascending order.

ACEFK
ItemLife LeftTot CostBalRank
signs1 250 250 1
paint curb1 500 500 2
tree work1 2,500 2,500 3
landscape2 9,000 7,200 4
siding2 9,000 7,500 4

Here is my formula:

=IF(ISERROR(RANK(C8,C$5:C$105,1)+ SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105))),0,RANK(C8,C$5:C$105,1)+SUMPRODUCT(--(C8=C$5:C$105),--(E8>E$5:E$105)))

I've attached a file.

View 7 Replies View Related

Ranking With Only Unique Names Attached To Values?

Apr 1, 2014

I'm making an excel file where I keep track of the scoring in a little competition me and my friends do with betting on sports.

However, I got a little problem trying to automate my ranking.

Naamloos.jpg

As you can see in the image, when there is a duplicate score, the name stays the same for every other same value (Joris). The formula I use (also as seen in the image) just takes the first name it comes across (from left to right) and keeps using that one. But I need it to ignore the name Joris the second time, and ignore Joris AND Tim the third time, so that every score/rank (even if the scores are a draw) has a unique name attached to it.

View 3 Replies View Related

Hiding Redundant Values From Multiple Sets Along With Adjacent Values

Aug 2, 2013

I am working on creating a spreadsheet that can be updated by those unfamiliar to excel. I have a master list on one sheet and three separate lists for business, individual, and general. Each list has three columns giving name, address and postal code. There are numerous repeats on these lists and I wanted to hide any duplicates while keeping my cells aligned. So far I have been able to highlight any duplicates, but was interested in some function that would save at least one duplicate while hiding any additional ones.

View 2 Replies View Related

Ranking With Blank Cells

Oct 3, 2008

In column d there are random numbers with some blank cells. In column e is the ranking column d from 1 upwards, see formula.

=RANK(D28,D$8:D$30,1)

What changes are required to have a result of a blank cell or zero for the corresponding blank cells in column d?

View 2 Replies View Related

Ranking Without Zero And Ranking On Multiple Factors?

Aug 12, 2014

I am facing some problem with ranking formulae. Attached is a file illustrating them.

Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.

Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.

This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.

Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.

View 1 Replies View Related

Ranking Visible Cells With Ties Without Skipping Rank

May 19, 2014

I have data that has filters and hidden rows and my current formula ranks with ties which is what I want, but I do not want the ranking to skip numbers.

Value Rank Now Rank I want
508 6
1001 1
696 4
704 3
833 2
557 5
1001 1
704 3
508 6

View 4 Replies View Related

Highlighting Cells If Specific Data Appears In Adjacent Cells

Mar 18, 2014

I have a couple of spreadsheets that has several columns each containing several hundred thousand rows of codes. To quickly analyze this data, I am trying to come up with a conditional formatting formula to highlight the respective cells when specific values occur next to each other. A particular code will show up in many cells, but the code that is the respective adjacent cell is always different. I need to know when row A contains, for example, '9928559' and row B contains '36415RT'.

View 3 Replies View Related

Merge Date From Adjacent Cells Inbetween Current Cells

Nov 17, 2009

I have 2 columns of data and want to be able to merge as follows

COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32

need to get result of

COL a
4123567
123.45
4125467
900.56
4356456
456.32

View 4 Replies View Related

2003 - Merging Four Adjacent Cells With Text And/or Blank Cells

Jun 14, 2008

I am trying to merge text, in four adjacent cells in the same row (say cells A1,A2,A3 and A4), into a single cell (say cell A5).

I would like a comma or full stop and then a space between each item merged (cell A5).

The text to be merged may appear in any one of the four cells (cells A1 to A4). Those cells without text are blank.

Only where all 4 cells are blank, will I need cell 'A5' to indicate this.

The formula needs to be relative as I will need to copy the formula down the spreadsheet so that it applies to additional rows.

View 9 Replies View Related

Color Cells Based On Adjacent Cells Being Empty & Add Text

Apr 2, 2008

I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!

http://img530.imageshack.us/img530/6239/excelspfk0.jpg

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved