I have attached a file that might give a better picture of what I am trying to do. I basically need a code that copies the item that is listed by the checkbox (if checked, may have multiple items checked) and paste it in a range depending on the values in cells B1 and B2.
View 5 RepliesI have a code that copies a template and pastes it into another tab. However, it is copying the conditional formatting and pasting it as well. I already have conditional formatting on the other tab and do not want it to paste another set of conditional formats because the formula's are changing between the copy and pastes.
I am having some trouble with a piece of code that is part of a larger macro. I have a list of data and I need to copy and paste the rows of data in which the values in column B are the same and then delete these rows from the original sheet. The code that i have come up with so far is as follows:
Sub Retreive_Particular_Rep_Invoices()
Dim RepInvoices As Long
Sheets("All Invoices").Activate
Worksheets("Current AM Invoices"). Range("A2:T65536").ClearContents
With ActiveSheet
For RepInvoices = 1 To .Range("B1").End(xlDown).Row
If .Cells(RepInvoices, 2).Value = .Cells(RepInvoices + 1, 2).Value Then
.Cells(RepInvoices, 2).EntireRow.Copy Destination:=Worksheets("Current AM Invoices").Range("A65536").End(xlUp).Offset(1, 0)
End If
Next RepInvoices
End With
End Sub
I know that this is not correct, but it's the best i have been able to come up with so far and thought that i would try and speed it up. I have also attached a spreadsheet with some basic data that i have been playing with as well.
I am trying to make each Cell in a range of cells to change its color from Black to one of a few colors. This should happen when the value of the Cell matches one of a few possibilities. The problem begins when I want the value of Sheet1 Cell A1 to come from Sheet2 Cell B1. When I change the value in Sheet2 Cell B1 the format of Sheet1 A1 changes only when I click on that Cell. How can I make it change immediately when I paste my values in Sheet2? Here is the code I am using on Sheet1:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case "one"
icolor = 1
Case "two"
icolor = 2
Case "three"
icolor = 3
Case "four"
icolor = 4
Case "five".......................
List Sheet Names From Opened Workbooks
View 7 Replies View RelatedI am trying to figure out how to copy and paste conditional formatting.
1371908# on hand 16458
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371908 Total416104
1371911# on hand 7053
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371911 Total416104
for instance in the above.. I want to black out any number in the "total" (bold) row that is less than the On Hand Qty (bold and underlined number) and I want to use a running total. For instance for part 1371911 with an On Hand Qty of 7053, the on hand is larger than the the first total of 416 so 416 should be blacked out, it is also larger than 416+104 so 104 should be blacked out as well.
This will continue until the on hand qty is less than the running total. I can conditionally format this one at a time and it could take forever as there are 3000+ lines of spreadsheet. If there is any way that you can tell me how to set the condtional format for one row and then cpy and paste it thoughout the sheet where needed.
i have an equation in A1, and i use conditional formatting for this cell, if the value of C1 is less than 1000, the result in A1 is red
i want to copy the result and the color of A1 to D1, i use paste value, the value and the color are then copied to D1 at first. but when i modify C1, the color of D1 also changed.
I have attached two Workbooks (OLD.xls and NEW.xls). I update this report weekly, but must always copy the previous week's status data (OLD.xls) into the new report (NEW.xls). Under each row, I enter a status update that pertains to the job (row) above it. When I run a new report, some data is removed and some is added to NEW.xls. (Details in the attached Workbooks)
I need to make sure that the proper status is copied and inserted below the new date for the matching job between Workbooks. The variable in column C must be the same in both Workbooks.
Sheet1 Cells A1:J18 contain my data and fill down according requirement Where column I find always with end data filled.
ABCDEFGHIJ1DATENumPartyQtyStockQty PendingWhole Sealer-RetailerRemark215-02-141ab1250101000A-M12316-02-142ac1001270B-N125417-02-143ad32017100C-O312518-02-144ae70024D-P720619-02-145af2005E-Q9720-02-146ag1061F-R15821-02-147ah17710G-S23922-02-148ai277H-T271023-02-149aj10I-U321124-02-1410ak120J-V371225-02-1411al140K-W1221326-02-1412am142L-X1121427-02-1413an150a15rr16bb17cc18ddSheet1
Considering reference last data cell of column I I want to copy 15 last row and paste them in the same sheet with cells M1:T16 as shown
MNOPQRST1PartyQtyStockQty PendingWhole Sealer-RetailerRemark2ad32017100C-O3123ae70024D-P7204af2005E-Q95ag1061F-R156ah17710G-S237ai277H-T278aj10I-U329ak120J-V3710al140K-W12211am142L-X11212an150a13rr14bb15cc16ddSheet1
I made a planner for shared use.
Is there any way users can cut and paste while keeping the Conditional Formatting of the source cells intact? It is the same as copy-paste and then delete the source cell contents after copying.
Excel 2003
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
I'm brand new to programming in Excel, and currently building a system that will help me trade equity options (similar to trading stocks). So far, I've put together the ranking system I want to use based on a live data feed that updates in real-time (during market hours). For every possible trade in my 'universe' (currently about 600), Excel provides a live score (based on my formulas and weightings) as well as prices and other info about the trade (options strikes, symbols, expected return, etc.).
What I'd like Excel to be able to do is keep a separate sheet where a trade (row) that scores over an arbitrary threshold, say, 100 'points,' is recorded as a static line (instead of continuing to dynamically update), like a snapshot of that line. I'll use this list of trades to submit to my broker for trading.
If it was as simple as a 'triggered' copy - paste special - values, that would do just fine. The trigger would also need to see if that trade has already been recorded for the day, so I don't get an infinite list of the same trade.
After a trade makes it into this list, I'll need to compare it to what I already have in my portfolio (which I'll also need to build) so I don't become too heavily weighted in any one trade. (Just thought I'd let you know where this will be going, too) ...
I'm trying to figure out how to copy & paste the following conditional formatting down the column.
The conditional formatting I'm using is in cell A1, D1, G1, J1, M1 (so I have to Ctrl click each cell manually & I then choose to "format the values that rank in the:" "bottom 1" & format it green.
I want to copy and paste that all the way down column A, D, G, J, & M and have the conditial formatting pick for each row, not the whole column. eg. A2, D2, G2, J2, M2... A3, D3, G3, J3, M3...
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
I need to apply conditional formats a certain range e.g. I8:I1000. Every time my spreadsheet is loaded with new data, the previous cf are erased, and I have to start all over again.
View 7 Replies View RelatedI want to copy cells (include conditional formatting) and paste in mspaint How can i write this code ?
View 9 Replies View RelatedI have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border.
However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies View RelatedWhat I have is a long list of about 100 items. I would like to set up an excel sheet that allows me to place checkboxes in each row and then whatever checkboxes have been checked, to simply collate and print out ONLY the check boxes that have been checked.
I have gotten as far as to create and rename the checkboxes but my skill ends there. I also need to know how to get each checkbox to correspond to a row.
I appreciate ANY help that you can give me.
EDIT: this doesnt NEED to be checkboxes, it can be optionbuttons if that is easier... simply something to select/deselect and print.
1.1 a blah
1.1 b blah
2.1 a blah
2.1b blah
3.1a blah
3.1b blah
3.3.a blah
etc blah
etc
I have inserted checkboxes in an excel worksheet to turn on/off certain data. They are working just fine. But I have set them all to not print (by unselecting the checkbox that says "print" in the format dialogue). SOME of the checkboxes don't print, but most of them do. I can't figure out why.
I've attached the file so you can take a look.
how to handle checkboxes in VBA
I have a worksheet ("Sheet1") with an activex checkbox (CheckBox1) in cell B1
what code do I need to tell if the checkbox is ticked or not. (it probably should be some true / false type test but I keep not getting the syntax of the code correct.
what do I need to declare or set or ? to access the state of the checkbox
I have a userform that contains 15 labels, each label has Numbers in it each time i click on a label the text is inserted into an excel spreadsheet. I use it as a fast input solution and works well and has done for a few years.
I Now want to Add three checkboxes to the userform
If checkbox One is ticked i want the letter "A" and the number in the label i choose to be inserted into the spreadsheet.
Checkbox Two "B"
Checkbox Three "c"
I would only ever tick one of the checkboxes never two or three so it would be A, B or C
This is the code for The Labels i use
If I select checkbox1 I want checkbox3 to be false and vice versa, thats simple enough. Everytime I click on one or the other checkboxes I have to reselect the one I want.
It takes two clicks to get a checkbox checked (True).
My listbox will be populated by both lists in the "Checkboxes" code once I select a checkbox, then reselct to repopulate.
Checkboxes:
I have data on various KPI's achieved by diff states in different months.
I am looking an automatic way of loading the data upon selection of choices from the check boxes in the attached file.
Choice could be multiple from two different options available (Months & States).
If I select state 3 also in this, with months being same, state 3 data should automatically get appended in the data visible now.
I have a worksheet that has multiple (form type) checkboxes on it, and I want to write code to loop through a specific range of them (Checkbox 26 to Checkbox 36 for instance), check if the value is true and then return the .Caption value to a message box, or ultimately a cell on another worksheet.
I can do it for all of the checkboxes on the ActiveSheet, but just can't figure out how to run through.
I've got several rows of checkboxes, I want to be able to select 1 checkbox on a row and the others not to be selected, or if they are it automatically deselects them, and then I want to select 1 checkbox on the next row and so on.
View 9 Replies View RelatedI don't understand why this code doesn't work:
Sub All()
Dim chk As CheckBox
For Each chk In ActiveSheet.CheckBoxes
CheckBox.Value = Checked
Next
End Sub
All I want to do is loop through all the check boxes on a sheet and check them. But the code acts as if there are no check boxes on the active sheet, I don't get any error messages it just never lands on the
"CheckBox.Value = Checked" line.
I'm having trouble with checkboxes - I've set up the userform but I can't seem to get it to send values to the specific cells when certain options are checked.
The way it should work is there will be an action and this could be involved with 1 process or 40 processes (and anything in between) and what will happen is the userform will pop up and ask what processes the action is applicable to. The user will then tick the correct ones and the form will then place these values in the corresponding cells next to the action.
a. I m trying to put up a userform that a. select different autofilteroptions (I'm using checkboxes)
b. let the user to do som autofiltering of several workbooks (the workbooks are similar regarding structure and formats).
c. take a copy of the result from the autofilter result
d. paste this in a new workbook
e. go to next workbook, do b. and c. and paste this under the result from the last session.
I am trying desperately to link activex checkboxes I have in an excel spreadsheet to a textbox. I need a textbox in cell K11 to appear whenever the checkbox in cell H11 is marked. Is this possible to create in excel using VBA?
View 9 Replies View Related