Conditional Copy And Paste
Jul 26, 2006
I am having some trouble with a piece of code that is part of a larger macro. I have a list of data and I need to copy and paste the rows of data in which the values in column B are the same and then delete these rows from the original sheet. The code that i have come up with so far is as follows:
Sub Retreive_Particular_Rep_Invoices()
Dim RepInvoices As Long
Sheets("All Invoices").Activate
Worksheets("Current AM Invoices"). Range("A2:T65536").ClearContents
With ActiveSheet
For RepInvoices = 1 To .Range("B1").End(xlDown).Row
If .Cells(RepInvoices, 2).Value = .Cells(RepInvoices + 1, 2).Value Then
.Cells(RepInvoices, 2).EntireRow.Copy Destination:=Worksheets("Current AM Invoices").Range("A65536").End(xlUp).Offset(1, 0)
End If
Next RepInvoices
End With
End Sub
I know that this is not correct, but it's the best i have been able to come up with so far and thought that i would try and speed it up. I have also attached a spreadsheet with some basic data that i have been playing with as well.
View 7 Replies
ADVERTISEMENT
Dec 11, 2006
List Sheet Names From Opened Workbooks
View 7 Replies
View Related
Dec 26, 2006
I am trying to figure out how to copy and paste conditional formatting.
1371908# on hand 16458
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371908 Total416104
1371911# on hand 7053
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371911 Total416104
for instance in the above.. I want to black out any number in the "total" (bold) row that is less than the On Hand Qty (bold and underlined number) and I want to use a running total. For instance for part 1371911 with an On Hand Qty of 7053, the on hand is larger than the the first total of 416 so 416 should be blacked out, it is also larger than 416+104 so 104 should be blacked out as well.
This will continue until the on hand qty is less than the running total. I can conditionally format this one at a time and it could take forever as there are 3000+ lines of spreadsheet. If there is any way that you can tell me how to set the condtional format for one row and then cpy and paste it thoughout the sheet where needed.
View 9 Replies
View Related
Dec 2, 2007
i have an equation in A1, and i use conditional formatting for this cell, if the value of C1 is less than 1000, the result in A1 is red
i want to copy the result and the color of A1 to D1, i use paste value, the value and the color are then copied to D1 at first. but when i modify C1, the color of D1 also changed.
View 9 Replies
View Related
Jan 28, 2008
I have attached two Workbooks (OLD.xls and NEW.xls). I update this report weekly, but must always copy the previous week's status data (OLD.xls) into the new report (NEW.xls). Under each row, I enter a status update that pertains to the job (row) above it. When I run a new report, some data is removed and some is added to NEW.xls. (Details in the attached Workbooks)
I need to make sure that the proper status is copied and inserted below the new date for the matching job between Workbooks. The variable in column C must be the same in both Workbooks.
View 3 Replies
View Related
Mar 4, 2014
Sheet1 Cells A1:J18 contain my data and fill down according requirement Where column I find always with end data filled.
ABCDEFGHIJ1DATENumPartyQtyStockQty PendingWhole Sealer-RetailerRemark215-02-141ab1250101000A-M12316-02-142ac1001270B-N125417-02-143ad32017100C-O312518-02-144ae70024D-P720619-02-145af2005E-Q9720-02-146ag1061F-R15821-02-147ah17710G-S23922-02-148ai277H-T271023-02-149aj10I-U321124-02-1410ak120J-V371225-02-1411al140K-W1221326-02-1412am142L-X1121427-02-1413an150a15rr16bb17cc18ddSheet1
Considering reference last data cell of column I I want to copy 15 last row and paste them in the same sheet with cells M1:T16 as shown
MNOPQRST1PartyQtyStockQty PendingWhole Sealer-RetailerRemark2ad32017100C-O3123ae70024D-P7204af2005E-Q95ag1061F-R156ah17710G-S237ai277H-T278aj10I-U329ak120J-V3710al140K-W12211am142L-X11212an150a13rr14bb15cc16ddSheet1
View 2 Replies
View Related
May 12, 2014
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
View 1 Replies
View Related
Nov 22, 2009
I'm brand new to programming in Excel, and currently building a system that will help me trade equity options (similar to trading stocks). So far, I've put together the ranking system I want to use based on a live data feed that updates in real-time (during market hours). For every possible trade in my 'universe' (currently about 600), Excel provides a live score (based on my formulas and weightings) as well as prices and other info about the trade (options strikes, symbols, expected return, etc.).
What I'd like Excel to be able to do is keep a separate sheet where a trade (row) that scores over an arbitrary threshold, say, 100 'points,' is recorded as a static line (instead of continuing to dynamically update), like a snapshot of that line. I'll use this list of trades to submit to my broker for trading.
If it was as simple as a 'triggered' copy - paste special - values, that would do just fine. The trigger would also need to see if that trade has already been recorded for the day, so I don't get an infinite list of the same trade.
After a trade makes it into this list, I'll need to compare it to what I already have in my portfolio (which I'll also need to build) so I don't become too heavily weighted in any one trade. (Just thought I'd let you know where this will be going, too) ...
View 14 Replies
View Related
Sep 23, 2011
I'm trying to figure out how to copy & paste the following conditional formatting down the column.
The conditional formatting I'm using is in cell A1, D1, G1, J1, M1 (so I have to Ctrl click each cell manually & I then choose to "format the values that rank in the:" "bottom 1" & format it green.
I want to copy and paste that all the way down column A, D, G, J, & M and have the conditial formatting pick for each row, not the whole column. eg. A2, D2, G2, J2, M2... A3, D3, G3, J3, M3...
View 7 Replies
View Related
Jan 15, 2008
I have 9 worksheets in a book with sheets 1-8 used for data entry, and sheet 9 used for a weekly data upload. Sheets 1-8 are all formatted the same, they just represent different vendors. I need a macro to look through column F (invoice number) on sheets 1-8 and see if the value of each cell already appears in column c on sheet 9. If the value is not found and the row value for column M (sheets 1-8) is >0, I need to copy the data from columns D:K and paste special values into the next blank row on sheet 9.
Basically I'm trying to see if I've already paid an invoice, and if not then I need to automatically add the data for payment. I've tried to mess around with a VBA code myself and ended up with a migraine every time. I've also tried to use the advanced filter, but the cell values I need to copy over contain formulas and conditional formatting...not to mention I can't delete the data on sheet 9 that has already been added.
View 9 Replies
View Related
Mar 12, 2009
I need to apply conditional formats a certain range e.g. I8:I1000. Every time my spreadsheet is loaded with new data, the previous cf are erased, and I have to start all over again.
View 7 Replies
View Related
Oct 29, 2012
I want to copy cells (include conditional formatting) and paste in mspaint How can i write this code ?
View 9 Replies
View Related
Jul 27, 2009
I have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border.
However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
View 4 Replies
View Related
Apr 12, 2012
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies
View Related
Mar 29, 2009
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
View 9 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Nov 25, 2012
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
View 2 Replies
View Related
Feb 4, 2014
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
View 7 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jul 10, 2006
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
View 9 Replies
View Related
Aug 4, 2009
I have a code that copies a template and pastes it into another tab. However, it is copying the conditional formatting and pasting it as well. I already have conditional formatting on the other tab and do not want it to paste another set of conditional formats because the formula's are changing between the copy and pastes.
View 9 Replies
View Related
Oct 31, 2006
I am trying to make each Cell in a range of cells to change its color from Black to one of a few colors. This should happen when the value of the Cell matches one of a few possibilities. The problem begins when I want the value of Sheet1 Cell A1 to come from Sheet2 Cell B1. When I change the value in Sheet2 Cell B1 the format of Sheet1 A1 changes only when I click on that Cell. How can I make it change immediately when I paste my values in Sheet2? Here is the code I am using on Sheet1:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case "one"
icolor = 1
Case "two"
icolor = 2
Case "three"
icolor = 3
Case "four"
icolor = 4
Case "five".......................
View 3 Replies
View Related
Mar 14, 2007
I have attached a file that might give a better picture of what I am trying to do. I basically need a code that copies the item that is listed by the checkbox (if checked, may have multiple items checked) and paste it in a range depending on the values in cells B1 and B2.
View 5 Replies
View Related
Sep 25, 2009
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
View 9 Replies
View Related
Mar 29, 2009
I have a cell with seven conditional formatting formula rules that I now want to copy to the rest of the column. I can copy/paste special/formats one cell at a time but if I try to to this with a group of cells, (or try using the format painter), it treats the formula references as absolute, even though they aren't shown as absolute in the rules manager. Am I missing something? Using 2007.
View 4 Replies
View Related
Jan 1, 2013
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
View 2 Replies
View Related
