I have a data set that is not structured well. I need to move information into multiple rows that share the same ID #. In the attached example, for cell C6, C7, C8 and C9 I want "Sunny 60" (ID=1). In C13-C16 I want "Sunny 65" (ID=2) and in C20-C23 I want "Raining 55" (ID=3).
ABCD
1ID
2info1weatherSunny
3info1Temp60
4info1Time7:50PM[code]...
I have a macro which subtotals my raw data and then copies the subtotal (visible cells only) to a new sheet.
THe problem I have is that when I copy the subtotal it is not coping the total row and the one above, so my figures are out.
Here is my code that I am using to copy
Range("A1").SpecialCells(xlCellTypeVisible).Copy
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
In VB, I have a command button with the name 'CommandButton'. I copy the button and try to rename the button using the following
ActiveSheet.Unprotect
CommandButton.Copy
Range("C" + Format(i)).Select
ActiveSheet.Paste
CommandButton1.Name = "btn1"
but I get the error message:
Run-time error '424':
Object required
How do I correctly rename the copied command button?
I’ve tried the code below to copy a file onto an intranet directory, when I manually do its fine but with the code below I get the error message ‘Path Not Found’, I’ve copied the file path from the actual directory which is on ‘ My Network Place’,
Sub Output ()
Dim FS As Object
Dim F As Object
'Saves Copy of PPJ log In directoy
Set FS = CreateObject("Scripting.filesystemobject")
Set F = FS.getfile("S:Output FilesOutput.xls")
F.Copy [url]
End Sub
Can excel copy text from multiple cells into one cell?
View 9 Replies View Relatedsuppress range name already exists when coping out workbook. I’m coping the selected worksheet out to another workbook…sometimes I get a message that a range name already exists and do I want to rename or not?. I always want to say no (don’t rename)…?
Application. ScreenUpdating = False
On Error Resume Next
Dim wb As Workbook
Dim ws As Worksheet
Set ws = ActiveSheet
Set wb = Application.Workbooks.Open("\03-serverdatadatabasemarterialListingsArchive.xls")
If Err.Number <> 0 Then
MsgBox Err.Description & "help"
Else
'ws.Copy After:=wb.Sheets(wb.Sheets.Count)
ws.Move After:=wb.Sheets(wb.Sheets.Count)
wb.Save
wb.Close
'ActiveWindow.SelectedSheets.Delete
End If
Application.ScreenUpdating = True
MsgBox "Worksheet has been Archived..."
I'm opening an excel workbook and link it to a workbook variable type, then I'm copying a sheet to a new book and trying to link it to a new workbook variable type
At the moment I can do this with the piece of code at the buttom, but I believe that this is not the best way to do it.
Why?
Because, this procedure is causing me some troubles at the end.
What happens in the last line of the code is that, besides I don't have any error, at the end of the procedure the workbook stills open in the memory and it should be deleted from the memory with the Set ... = nothing....
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
I have created a software on a userform and have copied contents of this userform to worksheet cells. However when I run it for the first time everything works and all contents goes in C4 - C8. However when I run it for the second time the contents in C4 - C8 deletes itself and new data appear i.e. the cells are overwritten.
In cell C3 i have the date and I have managed to put this date in the next empty column everytime the software is run. I do not understand why the dates can go to the next empty column without it being over written but cells C4 - C8 cant!
1. I have to hide rows using checkboxes
2. I have to copy visible rows (not marked ones) to another sheet in the same workbook. So far i have managet to creat this code for hiding/sowing rows:
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View Relatedhow can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies View RelatedIs it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedI have 2 workbooks, A (source) and B (destination).
Workbook A has 1 sheet named 'master' and has 10 columns a:j
I would like to copy a range of data in worksheet 'master' for entire 10 columns while the cell value (moving down worksheet) of the next cell in column A is greeater than the current cell. eg. if cell values of range a1:a6 = 1 then cell value a7 =2, then copy range a1:j6 to workbook B in sheet 'r1'.
Then I would like to go back to Workbook A sheet 'master' and begin process again starting from where it left off at a7.
I'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
Cell h2 Gives me a date =SUM(TODAY())+g2
I want to give the same cell a second condition
If(j2<25%,"--")
The problem is I want to write both the date range calculation and the If statement in the same cell but I dont know how to link them.
how to include a condition in the condition? What I mean is in this set of numbers:
1000(A) 1000(B) 1000(C) 1200(D) 500(E) 1000(F)
I want excel to point out (with a 1, True, x, whatever) if (B) is greater than (A) by 10% or more and if (C) is greater than (B) and so on. I know I cant use =if(C>B,1,0)...Im just unsure how to include the % in the function
I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies View RelatedI'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
How to delete cell with some condition?
View 1 Replies View RelatedI got 2 colums:
Column A: Column B:
EUR 1.00
USD 2.00
USD 3.00
EUR 4.00
As you may have guessed I now want Excel to check in column B the content of column A and to change format accoring to content:
Goal:
A B
EUR 1.00 €
USD 2.00$
USD 3.00$
EUR 4.00€
I want to stress, that a solution using macros isn't possible.
to write a VBA code that will have a cell RE-calcuate an excel formula ONLY if a date i have in a cell to the left of it is greater than another cell in the worksheet.
These dates will change so i cannot have the value entered into the VBA code, but rather linked to the data i would enter into the said cell.
I'm trying to write a formula that would filter data from one column based on condition entered in a cell. This one works great with single numbers or text in a reference cell:
=IF((a2=C$3);a2;"") copied down the column
but if I try to filter all numbers greater than 2 (I eneter ">"&2 in cell c3) it doesnt work. Is it possible with if formula or should I use something else?
How to get the cell value returned meeting condition both in row & column as well.
Sample sheet attached : Book1.xls‎
I want to use two separate Unit of measurement according to two condition in a same cell.
View 3 Replies View RelatedI run a small business, and I use Excel to track my books especially receivables.
I have a list of Invoice numbers and Invoice amounts for every customer.
My customers pay periodically (every two weeks, etc), but the tricky part is that the amount paid may not necessarily reflect the exact amount of invoice still being owed. And there may be two, three or five invoices outstanding at any one time.
I have another column which contains payment amount made by customer.
What I would like to do is to highlight the INVOICE NO. cell once the amount of that particular invoice has been bypassed by the total amount paid (i.e. the full amount of that invoice has been paid). Then I can close that invoice.
Here's what my list looks like roughly.
INV NO. - INV AMOUNT - AMOUNT PAID
INV1 ------- 100 ------------- 80
INV2 ------- 250 ------------- 90
INV3 ------- 150 ------------- 80
TOTAL ----- 500 -------------270
I'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.