I got 2 colums:
Column A: Column B:
EUR 1.00
USD 2.00
USD 3.00
EUR 4.00
As you may have guessed I now want Excel to check in column B the content of column A and to change format accoring to content:
Goal:
A B
EUR 1.00 €
USD 2.00$
USD 3.00$
EUR 4.00€
I want to stress, that a solution using macros isn't possible.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View RelatedI set format condition in range by tool bar(=if formula is yes then display cell.interior.colorindex=3), but I have no idea how to find out (.address) the red colour cells are displayed in range with VBA?
View 5 Replies View Relatedis there any way to set the conditional format to the colour of a particular cell if the condition is met?
View 9 Replies View Relatedi m trying to format a cell so that it colours in red when a specific text is chosen in another cell, ive tried conditional formatting but I cannot get it to work. e.g column A has a drop down list, if GB or IEN is chosen in that cell then cell in column K will become red. (as if these two are chosen then they have to input a number into column K). Once they have inputted the number into column K i want it to go back to its original format. Or if they dont select GB or IEN then it would stay in its original format aswell.
View 2 Replies View RelatedI have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
i cannot find my old msg , so i re-read again.
let me repeat my question one more time .
right now i can achieve is :-
when i enter in cell $A$6 " win " and i set the conditional format when this cell text = Win. i highlight "RED color "
i can set the above without much problem.
what i want to a bit more is when $A$6 ="Win" i wanted , the Row A6 till F6 cell all highlighted with red.
I am trying to work out a custom number format to display betting fractions properly - namely 3/2 as 6/4 and 2/3 as 4/6. The following works for 3/2:
[=1.5]"6/4 " ;??/??
However I can't get anything to work for 2/3 as it is a recurring decimal.
i'm trying to figure out a conditional formatting that if a cell is greater or equal to another cell - color a cell "GREEn"
otherwise...color the cell "red"
i have set some cells with format condition, so when the value of it is true the entire cell should be gray "font,border,pattern". so the data will be invisible. so it dose that but when i print the font is back to black? which should be gray? i dont know why its doing that.
i tried this in other computers some of them work ok and most of them dont?? maybe its the printers? if so whats the solution?
I'm trying to Multi-Select rows in order to format all rows, in "One Step" if the cell in col. "A" = 1. I managed to write the hereunder code but I'm still frastrating because I don't like the first RNG setting command. How can I avoid declaring RNG as row(1) and still be able to run the code. I assume I need some other Range set for RNG which, unfortunately, I could'nt find and the command I used includes row1 in RNG although cell A1 = 5.
Sub Conditional_Multi_Rows_Select()
Set RNG = Rows(1) ' this is my problem
LR = [A65536].End(xlUp).Row
For R = 1 To LR
If Cells(R, 1) = 1 Then
Cells(R, 1).EntireRow.Select
Set RNG = Union(RNG, Selection)
End If
Next
RNG.Select
Selection.Font.Bold = True
Selection.Font.ColorIndex = 3
End Sub
I had in mind to use:
Set RNG = Rows(65536)
but this will not make it a "neat" vba code, either.
I have a listbox that lists some items from a spreadsheet, but what I cannot figure out is how to have the font color of the items be RED if the value if negative, and default BLACK when positive...
how to alter the code to accommodate this?
VB:
With UserForm1.ListBox4
.ColumnCount = 5
.ColumnWidths = "2 cm;3 cm;3 cm; 3 cm; 3 cm" [code].....
I am using pivot table for my customer aging which a sample is enclose. What I want to do is to Highlight the field " Customer Name " in colour if the the Field " Type of guarantee" is other than 0. Also a message of " Credit limit Exceeded" if the outstanding is more than the Credit limit.
View 2 Replies View RelatedI would like to apply different conditional formatting at different times with a click of a button. I setup a dummy and turned on the recorder and recorded this
Range("A7:N7").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=$C7=1"
Selection.FormatConditions(1).Interior.ColorIndex = 37
Range("A1").Select
End Sub
I tried changing to this
'/Conditional Format - OTHER EXPENSE B/L
Set rngConditional = wsData.UsedRange
With rngConditional...............
I would like to have a single button that changes a range of cells from the USD to EURO to perhaps CAD symbol. Can this operation be performed, such that if I start in dollars, and I click the button once, it shifts by range to EURO (not formulas...just symbol)...and then if I click the same button again, it goes to CAD, and then back to USD with a third click?
View 5 Replies View RelatedI need in changing the format of sheet2 to exactly like the following image below.
*there are some codes in sheet2 which I think is the place to change the format.
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies View RelatedIs it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedI have 2 workbooks, A (source) and B (destination).
Workbook A has 1 sheet named 'master' and has 10 columns a:j
I would like to copy a range of data in worksheet 'master' for entire 10 columns while the cell value (moving down worksheet) of the next cell in column A is greeater than the current cell. eg. if cell values of range a1:a6 = 1 then cell value a7 =2, then copy range a1:j6 to workbook B in sheet 'r1'.
Then I would like to go back to Workbook A sheet 'master' and begin process again starting from where it left off at a7.
I'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
Cell h2 Gives me a date =SUM(TODAY())+g2
I want to give the same cell a second condition
If(j2<25%,"--")
The problem is I want to write both the date range calculation and the If statement in the same cell but I dont know how to link them.
how to include a condition in the condition? What I mean is in this set of numbers:
1000(A) 1000(B) 1000(C) 1200(D) 500(E) 1000(F)
I want excel to point out (with a 1, True, x, whatever) if (B) is greater than (A) by 10% or more and if (C) is greater than (B) and so on. I know I cant use =if(C>B,1,0)...Im just unsure how to include the % in the function
I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies View RelatedI have a data set that is not structured well. I need to move information into multiple rows that share the same ID #. In the attached example, for cell C6, C7, C8 and C9 I want "Sunny 60" (ID=1). In C13-C16 I want "Sunny 65" (ID=2) and in C20-C23 I want "Raining 55" (ID=3).
ABCD
1ID
2info1weatherSunny
3info1Temp60
4info1Time7:50PM[code]...
I'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
How to delete cell with some condition?
View 1 Replies View Related