Looping Down Through Worksheet While Condition Next Cell > Current Cell
Aug 27, 2008
I have 2 workbooks, A (source) and B (destination).
Workbook A has 1 sheet named 'master' and has 10 columns a:j
I would like to copy a range of data in worksheet 'master' for entire 10 columns while the cell value (moving down worksheet) of the next cell in column A is greeater than the current cell. eg. if cell values of range a1:a6 = 1 then cell value a7 =2, then copy range a1:j6 to workbook B in sheet 'r1'.
Then I would like to go back to Workbook A sheet 'master' and begin process again starting from where it left off at a7.
View 9 Replies
ADVERTISEMENT
Dec 15, 2009
I need the cell address where the cursor is (in a non active worksheet).
View 5 Replies
View Related
Nov 3, 2009
I have a worksheet that includes a cell that gives the current week of the month, in the form of "Week #". I've been using the formula below for several months and have had no issues until this month, and it's driving me crazy.
Given that cell D2 is the beginning of the week (usually Monday, but at the first of the month it may be a different day):
="Week " & ROUNDUP((DAY($D$2)+WEEKDAY(DATE(YEAR($D$2),MONTH($D$2),0)))/7,0)
I'm not sure where the logic is going wrong here; it's worked so well up until now. For the week beginning November 2, 2009, the formula above returns "Week 2" rather than "Week 1".
View 9 Replies
View Related
Oct 25, 2012
I have the need to email the current worksheet in Excel 2007, which I have been able to do with the following ...
Sub SendTab()
'Declare and initialize your variables, and turn off screen updating.
Dim wks As Worksheet
Application.ScreenUpdating = False
Set wks = ActiveSheet
[Code] .......
Is there a way I can also get it to also rename the sheet from the default "Book1" to the information in a referenced cell.
View 7 Replies
View Related
Feb 6, 2014
I am having trouble looping through a range and inserting a formula where a condition is met.
My range is "h9:i"
My current code inserts a formula in column i when there is a value in the adjacent row in column h:
[Code] .....
However, because there are so many rows (12,000+) it is taking a considerable length of time to run.
Some of the cells in column i will already contain the relevant formula, so to speed this up I want to insert the formula in column i only when the cell value (in column i) is not null, as opposed to inserting it for all cells within the range.
I know how to loop through the range, but the problem is the 'H9' cell reference in the formula in the code above will need to change depending on what row it is being inserted into- so if it is going into "i31" this will need to be "h31".
View 7 Replies
View Related
Sep 24, 2013
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
View 2 Replies
View Related
Mar 24, 2014
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
View 2 Replies
View Related
Jan 24, 2013
I would like to know if there is a way to expand the selection of cells from the current cell you are on to the very bottom cell available in the spreadsheet.
For example, I want to apply a formula from A12 - the very last A cell row in the spreadsheet.
View 1 Replies
View Related
May 23, 2014
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
View 5 Replies
View Related
Nov 11, 2008
I require a macro to enable a selected shape to be moved from current cell location to relative position but 1 row up. eg topleft address = A4 and shift shape to topleft address = A3
View 5 Replies
View Related
Dec 15, 2011
When I'm moving around in an Excel sheet, I want to have a keyboard shortcut that Autofits only the column I am "in", and only to the width of the cell I'm "in". So I can arrow-key into a cell, hit ctrl-shift-W or whatever, and the column will autofit.
I try Cells.EntireColumn.AutoFit but that's not what I want, it autofits every column. Sometimes this is not appropriate and I want to do it manually for the columns I want auto-fit.
I guess the more general question is how do I write VBA code for the column I am in and not every column or a specific column - not Columns("A:I") or whatever, it's going to be a different column every time depending on what cell I'm editing.
View 2 Replies
View Related
Nov 22, 2009
I've been pounding away at a project for two days trying to determine a way to identify a solution, to no avail.
Here is some experimental code. Under the assumption that in Column "A", every fifth line contains some text (a, b, c, etc) I want to place a function in column B that would identify the closest occupied cell above and to the left of the cell containing the function. The sub achieves this, but the function has a problem because of the Activecell line. Is there a way to identify the location of the cell containing the function to act as a reference point for the range?
Sub find_last_heading()
Application.ScreenUpdating = False
x = ActiveCell.Address
ActiveCell.Offset(0, -1).Select
last_heading = ActiveCell.Text
Do Until last_heading ""
ActiveCell.Offset(-1, 0).Select
last_heading = ActiveCell.Text
Loop
MsgBox last_heading
Range(x).Select
End Sub
Function cathead(Optional reference)
Dim cell
View 9 Replies
View Related
Mar 25, 2013
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
View 1 Replies
View Related
Jan 26, 2007
how can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies
View Related
Feb 9, 2007
Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies
View Related
Jun 3, 2014
A question regarding conditional formatting. Here is my current situation.
A
B
1
Name
DOB
2
John
01/01/01
3
Jack
02/01/01
4
John
01/01/01
I want it so that when there are 2 of the same names with the same DOB that all of those fields in A will be highlighted.
View 1 Replies
View Related
Jul 27, 2007
I am looking for a way to avoid the circular reference issue. I would like to monitor a cell that is being incremented and decremented so that I can automatically retain the highest and the lowest values that were entered into that specific cell over time. Since the data is only entered into that specific cell and not retained in for example a column, the MAX/MIN option is not usable in this case.
More simply stated, is there a way to put a formula in a specific cell ( A1 ) that will equal the target cell ( B1 ) only when that target cell ( B1 ) is greater than A1?
View 9 Replies
View Related
Aug 8, 2009
I have a macro in which i am taking information from one cell and puting it in to a text box but need to repeat this process from B1 to C1 to D1 etc here is what I have so far.
View 2 Replies
View Related
Nov 21, 2011
Im using this to loop through ID's for my code.
Sub Test2()
' Select cell A2, *first line of data*.
Range("A2").Select
' Set Do loop to stop when an empty cell is reached.
Do Until IsEmpty(ActiveCell)
' Insert your code here.
' Step down 1 row from present location.
ActiveCell.Offset(1, 0).Select
Loop
End Sub
How can I set a cell value = to what cell I the loop is currently on?
View 2 Replies
View Related
Jun 10, 2014
I'm getting an "Invalid or Unqualified Reference" error at the 'division=.cells' line when I try to go through each worksheet and paste some info from there onto a summary sheet. I know there is probably a simple solution that I am oblivious to.
Code:
For Each sheet In ThisWorkbook.Worksheets
i = 1
division = .Cells(2, 1)
[Code].....
View 6 Replies
View Related
Apr 29, 2009
how to include a condition in the condition? What I mean is in this set of numbers:
1000(A) 1000(B) 1000(C) 1200(D) 500(E) 1000(F)
I want excel to point out (with a 1, True, x, whatever) if (B) is greater than (A) by 10% or more and if (C) is greater than (B) and so on. I know I cant use =if(C>B,1,0)...Im just unsure how to include the % in the function
View 2 Replies
View Related
Sep 12, 2007
I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies
View Related
Aug 5, 2009
I need a function(s) that can indicate the current cell column and row in two different cells.
e.g.
Let's say in Cell A1 should indicate the column of current selected cell and B1 indicates the row of current selected cell.
A1 would read - 7 and B1 would read X if the current cell is at X7.
I do not know VBA. If you give VBA solution, please give me link on how to activate the codes.
View 10 Replies
View Related
Oct 14, 2008
I have a worksheet with 30,000 rows. But sometimes even if I have fewer records in this worksheet(lets say 1000) worksheet shows the same 30,000 rows.And its annoying when you try to navigate using vertical scroll bar. Is there any option to re-adjust the worksheet to make it more user friendly based on number of rows in current sheet.
View 2 Replies
View Related
Jun 12, 2007
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies
View Related
Jul 15, 2014
I've recorded a Marco copying and pasting information from one cell to other cells and some of the copying functions paste to two cells. I just need this to loop through all information I'm copying from the the new cells.
Range("I1").Select
Selection.Copy
Range("D1").Select
ActiveSheet.Paste
Range("J1").Select
[Code]...
View 7 Replies
View Related
May 15, 2012
I pulled to follow code off the Microsoft site.
[URL]....
The problem I'm having is that the code isn't actually looping through the workbook - it's replaying over and over again on the same worksheet. I figure this is an easy fix but this figure is as useful as dog clues to ants.
Sub WorksheetLoop2()
' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets
A bunch of page formatting. Unmerge, cut, paste etc.
Next
End Sub
View 9 Replies
View Related
Oct 1, 2006
how would i be able to loop through all controls on a worksheet and see what type of control they are? : D
View 9 Replies
View Related
Jan 2, 2010
Is it possible to effect one cell by the condition of another cell. For example cell A1 turns blue when cell C4 meets a certain condition.
The 1st sheet my users see after install requires a little patience. he/she has to put mandatory information into certain cells. I would like to blank out the rest of the sheet (formatting and all) until this information is supplied. So that the necessary initial requirements stand out alone.
This is a budget package. The user has to initially supply - weekly wage - start date, Account names, estimate amounts that will be spent on each account per week, before the program can work
I do supply instructions - but hey! who reads them? They get refered to perhaps after the 1st stuff up.
A form may work - but the sheets are already laid out with spaces in the wrong places for forms (so the Form Wizard seems to indicate) - beside the fact that I wouldn't have a clue how to make a form
View 9 Replies
View Related
Jan 13, 2010
I had create a few macro with the macro name the same as the worksheet name.
How can i create another macro to loop through all the worksheet and if there is any data in Cell A1, it will call the corresponding macro. If there is no data, it will go onto another worksheet.
View 9 Replies
View Related
