Cell h2 Gives me a date =SUM(TODAY())+g2
I want to give the same cell a second condition
If(j2<25%,"--")
The problem is I want to write both the date range calculation and the If statement in the same cell but I dont know how to link them.
I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.
The Cell formula that I am trying to use is as follows:
=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))
A3 contains TODAY()
H114 is the cell being calculated
AA118 is the cell containing the calculated value for the current month.
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.
View 6 Replies View Relatedhow can we disable/enable a cell based on a condition which is dependent on other cell data
View 4 Replies View RelatedIs it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedI have 2 workbooks, A (source) and B (destination).
Workbook A has 1 sheet named 'master' and has 10 columns a:j
I would like to copy a range of data in worksheet 'master' for entire 10 columns while the cell value (moving down worksheet) of the next cell in column A is greeater than the current cell. eg. if cell values of range a1:a6 = 1 then cell value a7 =2, then copy range a1:j6 to workbook B in sheet 'r1'.
Then I would like to go back to Workbook A sheet 'master' and begin process again starting from where it left off at a7.
I'm having trouble with the two formulas working in conjuction with each other.
Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))
Condition 2:
=TODAY()>=A1
"Condition 1" seems to override "Condition 2"? Ever see that?
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
how to include a condition in the condition? What I mean is in this set of numbers:
1000(A) 1000(B) 1000(C) 1200(D) 500(E) 1000(F)
I want excel to point out (with a 1, True, x, whatever) if (B) is greater than (A) by 10% or more and if (C) is greater than (B) and so on. I know I cant use =if(C>B,1,0)...Im just unsure how to include the % in the function
I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies View RelatedI have a data set that is not structured well. I need to move information into multiple rows that share the same ID #. In the attached example, for cell C6, C7, C8 and C9 I want "Sunny 60" (ID=1). In C13-C16 I want "Sunny 65" (ID=2) and in C20-C23 I want "Raining 55" (ID=3).
ABCD
1ID
2info1weatherSunny
3info1Temp60
4info1Time7:50PM[code]...
I'm a structural design engineer and I want to develop my own spreadsheet to calculate required area (mm^2) of reinforcement bars in concrete to avoid concrete cracking due to temperature rise in summer. Available input are min area of reinfor (cell A3), crack width limit (A1) and calculated crack with (A2). For example.....
A1= Crack width limit 0.2mm. A2= Calculated crack 0.28mm (which is higher than the limit 0.2mm; therefore min area of reinfor A3= 1450mm^2 is insufficient to stop concrete from cracking). Now......to stop cracking, I want cell B1 to take 1450 from A3 and keep increasing it until the condiotn A1>=A2 is met and I want cell B1 to display that increament( lets say 1780mm^2). I hope you do get what exaclty I want to do in excel
I don't have much experience in Excel so I don't know anything about Macro/VBA coding etc. Can we do a simple thing like this B1=IF(A1>=A2,A3,somthing here to keep adding a value to A3??) OR do we have to give pragamming code???
If it has to be Macro/VBA, complete coding with an instruction where to write it.
NB: There are several calculations done with manual inputs within the sheet to derive the A2 (0.28mm) value
How to delete cell with some condition?
View 1 Replies View RelatedI got 2 colums:
Column A: Column B:
EUR 1.00
USD 2.00
USD 3.00
EUR 4.00
As you may have guessed I now want Excel to check in column B the content of column A and to change format accoring to content:
Goal:
A B
EUR 1.00 €
USD 2.00$
USD 3.00$
EUR 4.00€
I want to stress, that a solution using macros isn't possible.
to write a VBA code that will have a cell RE-calcuate an excel formula ONLY if a date i have in a cell to the left of it is greater than another cell in the worksheet.
These dates will change so i cannot have the value entered into the VBA code, but rather linked to the data i would enter into the said cell.
I'm trying to write a formula that would filter data from one column based on condition entered in a cell. This one works great with single numbers or text in a reference cell:
=IF((a2=C$3);a2;"") copied down the column
but if I try to filter all numbers greater than 2 (I eneter ">"&2 in cell c3) it doesnt work. Is it possible with if formula or should I use something else?
How to get the cell value returned meeting condition both in row & column as well.
Sample sheet attached : Book1.xls‎
I want to use two separate Unit of measurement according to two condition in a same cell.
View 3 Replies View RelatedI run a small business, and I use Excel to track my books especially receivables.
I have a list of Invoice numbers and Invoice amounts for every customer.
My customers pay periodically (every two weeks, etc), but the tricky part is that the amount paid may not necessarily reflect the exact amount of invoice still being owed. And there may be two, three or five invoices outstanding at any one time.
I have another column which contains payment amount made by customer.
What I would like to do is to highlight the INVOICE NO. cell once the amount of that particular invoice has been bypassed by the total amount paid (i.e. the full amount of that invoice has been paid). Then I can close that invoice.
Here's what my list looks like roughly.
INV NO. - INV AMOUNT - AMOUNT PAID
INV1 ------- 100 ------------- 80
INV2 ------- 250 ------------- 90
INV3 ------- 150 ------------- 80
TOTAL ----- 500 -------------270
I'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.
I have a workbook sheet change condition that, when triggered runs the following code (amongst others).
[Code] ......
What I would like is to amend the above (possibly in a loop?) so that it skips the rows in which the value "New" features in range F17:F190.
So basically Autofill as per the code but leave the values in the cells of the range in which New features in range F17:F190
I have 2 sheets in an excel folder and in fact I would like to create a macro to tranfer a row of the chart present in Sheet 1 if a cell is matching a condition so that the macro identifies each row of the chart in the Sheet 1 and transfer the row in the other sheet if the value in the column A (Chart Sheet 1) is equal to 1 :
sheets("Global Sheet").Select
Range("A1").Select
If activecell = 1 Then Transfer A1:J1 in the other excel sheet ( anywhere)
I have 2 cells that take imported info. from a DDE server. Lets say one cell currently has a number of 9.00. Lets say the 2nd cell has a number of 1.00. Lets say the 1st cell over time goes from 9.00 to 8.50 to 7.33 to 6.67 and so on....it continues to go down. At the same time, lets say the 2nd cell is gaining and going from 1.00 to 1.33 to 2.00 to 2.67 to 3.33, and so on...and it continues to go up. I want to have a certain sound play once the two cell numbers "cross" each other. I only want this sound to play one time and not every "tick" as they cross and go up/down. Can someone show me how to program this?
View 14 Replies View RelatedI had an report and the rows of the report needs to be colored based on another cell value. My layout looks like this:
A1B1C1D1AVG
1011121330
14151617100
18192021400
For each cell, i need to compare the value of cell with that value in AVG coloumn and if condition is met, cell should be colored. Eg : If first cell value under A1 is Less than 0.2 * AVG of first row then color of the cell A2 should be red. After coloring the entire rows, then i should check and color the header row based on the color of Rows.
I tried first one, i,e coloring the rows based on conditional formatting and then written VB code to compare the color of rows and colored the header row. But the color index used in conditional formatting and the code are mismatching and the desired output is not coming.So decided to write code for coloring the rows cell.
I have a worksheet where two columns of data are written. In another worksheet I have a list of data in one column. In column next to it (so the rows are the same) I am trying to write a list of sumif formula, where the range is first column of the first worksheet, condition is a value of the cell next to where I am writing the sumif equation (list of data) and the sumrange is the second colummn in the first worksheet. I can't get it. I tried with --- "C" & i --- but I get an error saying expected:end of statement. It goes like that:
View 2 Replies View RelatedI want to have a condition which will check if the value in cell is present or not and based on that i have to display result in a cell.
Eg: In Sheet1, in column D i have 4 values (Simple, Complex, Medium Complex, Very Complex)
In Sheet 4, we have numeric values to Simple, complex...Like below
Complexity Estimation
Simple 2hrs
Complex 4hrs
Medium Complex 2.5hrs
Very Complex 6hrs
In Sheet5, we have values defined in % like below:
Requirement Analysis
15%
Design
20%
Coding
20%
System Testing
15%
[code]....
In column G of Sheet1, we have to write a function or formula which we do below calculation.
IF (Sheet1!D3="Simple") then Sheet1!G3=Sheet5!B2(ie.15%) of Sheet4
Similarly i will have Sheet1!D3 values as Complex,Medium Complex,Very complex
I have text in Q2:Q30 this text is spread out in N2:N500
then i have Numbers in K2:K500
what i would like to do is to
find Q2 in N2:N500 (can be there many times) and add numbers from K2:K500 where found into R2
example Q2 is Denmark
I have Denmark in N40, N60, N490
Now in R2 i would like to add K40 + K60 + K490
i have started with this
=IF(ISNUMBER(MATCH(Q2,$N$2:$N$500,0)),SUM but now i`m stuck
I have so data I am trying to combine based on count value of investment on Col A. If it appears more than once on col A then I want the col B values on col D. I have macro that works but I need make sure if Col B have any TRAC and TRL1 then I want to add that on Col D. For example so Col D1 would be EURX, TRL1 at 83.50, FTID and Col D5 would be TRAC at 87.88, Markit. Below is the macro.
View 9 Replies View RelatedI need to change automatically the color of a cell (let say A1) to green if the cell content is YES and to red if content is NO. Which function to use?
View 2 Replies View Related