I have a worksheet which contains daily results and want to copy the formulas within the Cell F2 but only copy into the cells where the data has recently been added.
EG: Within the attached worksheet i have just entered the data for the 03/06/2014, so i only want the formula to be copied into column F for this range.
Potential it could the vb code could look at Column B and if blank then paste.
I have a timeline in tab 1. I want to copy a specific cell range from tab 1 to tab 2 but when I make an edit to tab 1, I want it to show up on tab 2 automatically. I believe that's cell referencing but how do I reference an entire range?
View 1 Replies View RelatedI would appreciate some ones help to correct a macro I'm trying to write. The macro copies 3 columns from Sheet1 to Sheet2 in a selected location. The 3rd column copied needs to be pasted in a different column in Sheet2.
View 6 Replies View RelatedI have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:Â
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
That does allow me to filter the output in Master, but ideally what I would want to do is not have to set aside 300 lines in the Master file for each of the Staff files. Conceptually, I'd like to have the spreadsheets Staff A, Staff B, etc. look for and export only lines which have data in them and then have Master bring those lines in automatically. This may not be possible, in which case your suggested solution is the best approach.
View 9 Replies View RelatedEssentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
I have a macro that first refreshes a specific data range that imports data from a text file as such:
View 2 Replies View RelatedI want to extract specific expense for my year 2009 work book. such as just rent with relevant data from all other expeses.
for example in my work book, I want to extract rental expense with relevant GST PST and Total for all three months. i attached a excel work book for broader idea.
I just want to check that if it is possible to copy specific cells from one row to another sheet by using macro or any other script.
Attached is a sheet which explains what exectly I want
The sheet one is having Source data
Sheet three is the result sheet
If I put some code numbers (in number form) it should search the data from source sheet and update the same in result sheet in different rows
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
I have to open each pdf file in a specific folder, select and copy all contents and paste it in column 'A' of a new workbook.
I have tried following code but not worked...
Code:
Sub ConvertPDF(control As IRibbonControl)
Dim AdobeApp As String
Dim AdobeFile As String
Dim StartAdobe
Dim fso As New FileSystemObject
[Code]...
I have Acrobat Reader installed. Any method without using 'SendKeys'?
I am trying to create a macro that will copy data from one sheet to four other sheets depending on some requirments in the data. I have a main worksheet that will store the data, the name on this sheet will change daily, so you cannot use a "named" sheet in your macro. The other three names of the sheets are "Esky", "Indy", "Gfld", and "Other". When copying the data, I need to copy the entire row of data to the required sheet. The data comes in such as:
MZ03948 134 126.23
PZ34533 128 12.28
IM04985 630 198.50
Z109384 40 35.65
2130494 76 12.28
2236326 12 45.63
5123132 12 12.23
Based on the FIRST TWO characters in the first column, I need to copy the data to the specific sheet. I would assume a simple LEFT() function would work for this. Here are the requirments for each sheet:
Esky - "MZ" or "51"
Indy - "IZ" or "Z" or "21"
Gfld - "PZ" or "22"
Other - Anything else
how I might 'trigger' a macro to run when a certain cell was filled with any value at all. I have the macro working fine (it's a simple copy and paste special) but I want it to run automatically when the cell A20 has a value in it.
View 9 Replies View RelatedI have a piece of code used to find a matching date in a column and then unhide that column. Code works because there was only one date on the sheet other than the one's I was trying to find. I now have to store additional dates in the sheet and this is disrupting the search as it stops (as it should upon finding a match). I would like to see if there was a way to modify it so that it will look for the match in specific columns i.e. Specifically the dates are located in AX1:IX1. Here is the code
Columns("AX:IK").EntireColumn.Hidden = True
Dim DateToFind As Date
DateToFind = Range("a1")
Cells.Find(What:=DateToFind, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, _
MatchCase:=False).EntireColumn.Select
Columns(ActiveCell.Column).EntireColumn.Hidden = False
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
From mySQL database, i am getting a ton of data that is all being inputted into a single excel cell. Within this cell, there are certain data points that i wish to obtain (Bank #, SSN #, Routing #). There are multiple difficulties in obtaining this information.
1. these cells contain the same fields, but different number of total characters (differing in names, addresses, etc.)
2. some of the data points (like SSN) are inputted incorrectly, so even though a SSN is only 9 digits/characters, I may have to output all 11 that the SQL database placed within the cell.
Can I get some help? I'm thinking of a search function/macro within excel, because all of the fields show up correctly.
something like (i know this doesn't work)
= or("cellA1" contains/finds/function SSN,return the 9 characters after "SSN ")
um...yeah. difficult to explain, i'm sorry!
edit: not sure what is wrong the file. I have attached a new one.
I have a list of sites and depending which site I select from my drop down box I want to retrieve that data from my full data sheet. How can I go about doing this?
View 3 Replies View RelatedI am looking to have the data ranges in tab 'Type' update automatically in 'Output' for a particular start date. So for example if I enter LBO into cell E3 in the 'Output' tab it will input the data range for LBO from tab 'Type' but from a specific start date.
I know I can achieve part of this via LookUp functions but it is the start date that has me stumped.
I have a problem with a calculation i am trying to do. I have to calculate holiday allocation for staff but i my company also offers length of service bonus days. After 5 years you get 1 extra day, after 10 years you get 2, after 15 you get 3 and so on. In my sheet i have a formula based on their start date that tells me their length of service in the following format: 10 years, 2 months.
I have put an IF Statement in for each of the different milestone criteria but the result is not coming back so i know i am missing something. Is there something wrong with the formula itself or is there a better one that will allow me to put the start and end of the range i want it to look at? For example can i tell it to say if between 5 years and 9 years 11 months put 1, if between 10 years and 14 years 11 months put 2 etc in column H.
How do you select specific coloured cells from a range of data in one go, without having to scroll through the worksheet and pick them out individually?
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
What im trying to do is have a macro that will open a file called Blue 1.xls in location "I:SchedulesBlue" and then copy data from cells N13:034. Then paste it into another excel file (Press.xls)on worksheet "Press Break" cell G14.
The data that is copied not always fills up the cells N13:O34 so I need it to go to the next blank cell in column N and paste the information from file Blue 2, and so on for Yellow 1, Yellow 2, YellNR, and Green.
So to summarise I need a macro to open 6 files copy data from the same location on each of the files(N13:O34) then close and paste it into a master document(Press.xls) worksheet "Press Break".
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
