I have a piece of code used to find a matching date in a column and then unhide that column. Code works because there was only one date on the sheet other than the one's I was trying to find. I now have to store additional dates in the sheet and this is disrupting the search as it stops (as it should upon finding a match). I would like to see if there was a way to modify it so that it will look for the match in specific columns i.e. Specifically the dates are located in AX1:IX1. Here is the code
Columns("AX:IK").EntireColumn.Hidden = True
Dim DateToFind As Date
DateToFind = Range("a1")
Cells.Find(What:=DateToFind, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByColumns, SearchDirection:=xlNext, _
MatchCase:=False).EntireColumn.Select
Columns(ActiveCell.Column).EntireColumn.Hidden = False
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
I have data that is on a separate .txt file (the source file) that resembles this;
A B C D E F
1 Case District Pct Division Level1 Level2
2 305035 0 20 72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
Private Sub CommandButton2_Click() Dim myarr() As String, size As Integer, i As Integer size = WorksheetFunction.CountA(Worksheets(1).Columns(2)) user = Environ("username")
[Code]...
when the FOR-LOOP finds the username inside the column B (many times will have more than one result) I would select all the rows that have this username and display that data into a listbox but not only the rows that have the username but also I would like to get the next column C and D in the same row and display all those data into a listbox.
ID username date status 1 usuario1 25/01 ok
[Code]...
taking the table above as example I have USUARIO2 twice in the column B so I would like to get that row and also the DATE and the STATUS from this USUARIO and display it in a listbox. If I'm the USUARIO2 and I click in the button Then I will have a listbox like this:
USUARIO2 26/01 denied USUARIO2 27/01 ok
What should I add into my code to get this result?
I have a large report that I pull each month listing which products we sold last month. There are certain products I don't want included in the report. Until I can have the report re-written, I'm looking for a macro or a function that will find all the rows that contain these product numbers in column M and delete the entire row. The product numbers I need to delete are always the same, but some months one or more of them might not be in the report if they weren't sold.
In Summary:
Find in column M the product numbers: c1000 316140a 316140 316295a 316295 316311a 316311 316451a 316451 316450a 316450 316452a 316452
Delete those rows containing the product numbers above
I need a Macro that will search all of the cells for specific text, and delete all cells containing the text. I prefer to make a list of the specific texts and run macro to find all of them and delete all cells containing the text. I need to be able to add some more text into the list in future.
automate a data table I set up in excel. I need the formula to look through a bunch of raw data I have, and add quantities in each row, but only from the rows that have the same machine numbers. I attached the document of raw data I've collected, and on a separate tab, an organized table. I would like this table to automatically be updated with the appropriate data, as I enter it as raw data.
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?
I have a worksheet which contains daily results and want to copy the formulas within the Cell F2 but only copy into the cells where the data has recently been added.
EG: Within the attached worksheet i have just entered the data for the 03/06/2014, so i only want the formula to be copied into column F for this range.
Potential it could the vb code could look at Column B and if blank then paste.
I have a list of sites and depending which site I select from my drop down box I want to retrieve that data from my full data sheet. How can I go about doing this?
I am looking to have the data ranges in tab 'Type' update automatically in 'Output' for a particular start date. So for example if I enter LBO into cell E3 in the 'Output' tab it will input the data range for LBO from tab 'Type' but from a specific start date.
I know I can achieve part of this via LookUp functions but it is the start date that has me stumped.
I have a problem with a calculation i am trying to do. I have to calculate holiday allocation for staff but i my company also offers length of service bonus days. After 5 years you get 1 extra day, after 10 years you get 2, after 15 you get 3 and so on. In my sheet i have a formula based on their start date that tells me their length of service in the following format: 10 years, 2 months.
I have put an IF Statement in for each of the different milestone criteria but the result is not coming back so i know i am missing something. Is there something wrong with the formula itself or is there a better one that will allow me to put the start and end of the range i want it to look at? For example can i tell it to say if between 5 years and 9 years 11 months put 1, if between 10 years and 14 years 11 months put 2 etc in column H.
How do you select specific coloured cells from a range of data in one go, without having to scroll through the worksheet and pick them out individually?
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB: Private Sub CommandButton1_Click() Dim f As Double Dim t As Double
How to find and replace a range of values. I've looked online, and searched the forum with no success.
I have a list of cells in a column labled "Check #1", "Check #2", "Check #3" ect. I'm trying to build a Macro that would replace any value from "Check #1" to "Check #50,000" with "Outgoing Check". I know this can be done manually with relative ease, but it will need to be done very very very often, so I'd like to automatic it as much as possible.
How to put the steps into a Macro or Formula that could be re-produced with ease.
find a continuous data range in Column A of a worksheet with a header in A1. But now I'm thinking that I asked the wrong question. Each day I have new data (a series of numbers) that are moved into column A of a spreadsheet. I never know ahead of time how many numbers will be in the data set. And I need to perform a series of calculations on the data. I need to do the following:
1. Find the range of the data set. 2. Perform a series of calculations on the data set. 3. Report the results in a new location.
If #1 is pre-defined, then #2 and #3 are very easy. However, #1 is causing problems. I can find the range as a string:
Here is what i am trying to achieve. If the date 2/20/2010 is located at F53 & the cell next to it at H53 is populated with a number between 1 & 16, then i want the cell at J11 (42 rows further up) to auto populate with the number 1. When this occurs the cells beneath this, from J12 to J52 should also auto populate with the with consecutive numbers from 2 to 42. Would also like to see the cells with numbers 1 to 28, automatically format to orange & the cells containing numbers 29 to 42 automatically format to yellow. I plan to have this condition repeat several times later in the year, at dates that are to be decided. When these dates are decided i want to be able to enter a number from 1 to 16 & next to the date & all of the above automatically occurs.
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN S33 / 33 - :133/01504 TR NI101 - :101/915635 T N101 - :101/915635
I have attached a file to make this easier. Basically I would like to search "Points Scored" (B2:W9) for the highest score (which I already have done) and when it is found return the team's name that is associated with it. Then do this for the second, third, etc. as it can be seen in the "Main" sheet. I'm thinking an index/find approach, but I just keep getting "N/A".
I am looking to Find and Replace (via ctr-F) but I need to replace it only within a range of selected cells. Each time I try to do this it replaces everything even though I have tried selecting each cell and replacing only that. Is there a way to select a certain amount of cells and replace?
