Copy Rows Based On Multiple Criteria ....
Oct 31, 2006
I am trying to loop through a column and cut and copy cells containing one of ten or more criteria (text strings) to the next worksheet, which already exists.
The basic loop is set up, and I understand that an array for the multiple criteria is needed but am falling at this hurdle, as well as struggling with the routine to copy the row to the next available row on the next worksheet.
I have omitted to post my effort so far, as it's embarrassingly basic, but can anyone help with the code?
View 9 Replies
ADVERTISEMENT
Apr 8, 2009
I have seen all kinds of copying routines, but haven't been able to get what I want.
1. Copy Row contents from activeworksheet
2. The activeworksheet will have various row counts
3. The activeworksheet has row 1 as header.
4. The criteria to use is in the current worksheet columns P through Z
5. The criteria to look for is the word inspect. only the word inspect, not words that contain inspect (i.e. "inspection") should not be found.
6. The word could be in column P and in S, but needs to be only copied once, becuase it has meet the criteria, but it also could only be in c
7. Copying the row into a Sheet named "Inspection"
As a bonus would be cool to be able to copy certain cells or the entire row.
View 9 Replies
View Related
Nov 20, 2012
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
View 5 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Dec 18, 2006
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
View 9 Replies
View Related
Aug 4, 2009
I have been struggling to setup these two workbooks for a bit now, and I can't for the life of me figure out a formula to do what I need to do. Essentially, I have one workbook that contains a list of purchase records for my company, sortable by Date, Vendor, Price, etc. and one workbook that has a sheet for every vendor. What I need is a formula that will search column B for a vendor, Allied Waste for example, and transfer all the information within the rows for every instance that vendor is found to the new workbook.
This is basically just a way where I can input information once in one workbook, where the sheets are divided by month, and the info will automatically transfer to another workbook, where the sheets are divided by vendor.
View 2 Replies
View Related
Jul 14, 2006
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range
Dim strFirstAddress As String
With Sheet4.UsedRange
Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If ..................
View 9 Replies
View Related
Oct 29, 2013
There is no where else for me to go. My problem is: I have a table with over 30,000 rows and columns A - W. The first column A contains UNIQUE ID. Column G contains CATEGORY CODE.
Example.png
Since Unique ID (column A) can be listed more than ones, I need to select only those records (rows) that correspond to the following: Category Code (column G) is either 14, 15, 16, 17, 18 and not any other. I hope you can see the attachment, UNIQUE ID = a;does not satisfy my criteria as it does contain Category Code 14, it also contain other codes. The final result from the sample provided would be extracting data for UNIQUE ID = e (since it is the only record that does not contain any values other than 14, 15, 16, 17, 18).
View 6 Replies
View Related
Mar 19, 2007
Example attached. I need to filter rows based on a start date and stop date, columns C and D. So for example the filter date is 01Mar07 (located in A5). As this date in this cell is changed the rows are filtered accordingly. I need to filter rows so that any row with a start date which includes Mar 07 is shown and I need to include all rows that have an end date in Mar 07. This would result in the inclusion of an event that started in Feb and Ends in march being displayed.
Additionally, I would need to clear the filter. I'm just starting out, I'm sure this is easy for you all the excel experts., and you may probably have a better method to approach this.
View 2 Replies
View Related
Dec 17, 2008
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
View 9 Replies
View Related
Jan 30, 2008
I have on sheet1 of my workbook a number of rows of data, from column A through Column G. The Data in column G either contains the text "Yes", or "No".
I need a macro that will look through each row in this sheet, and upon finding a "Yes" in the cell in the column G, will copy that entire row (columns A through G) into a new row in sheet2. Sheet2 currently contains data, so I'd like to move everything down by one row and paste this data at the top (row 6 is the first line of data on this sheet).
I'd then like to go back to sheet 1, and delete the row I've just copied. Then continue though the loop. The loop needs to stop when a blank row is discovered.
View 5 Replies
View Related
Jul 31, 2008
I'm not sure that I'll be able to explain this clearly, so I've attached an example. There are 3 columns - Issue, Action Group and Status. Many Issues belong to the same Action Group and others do not belong to any Action Group. The is also a Status summary section that has the total Issues and Actions associated with each status. For example the Status called Resolved could have 10 issues and 5 Actions (including blanks). The problem is that I can't figure out a way to get the total for the Actions. As I said this explanantion isn't great, so the attached sheet
View 3 Replies
View Related
Apr 18, 2014
I have a table based on transport numbers who sometimes have doubles. Example:
Number Postcode Value1 Value 2...
106200 8500 10
106200 8500 5
106200 8600 6
106201 5500 4
106202 4000 1
106202 4000 1
So it works as following:
A transportnumber can have multiple instances of itself, such as 106200. This transport number can also have multiple instances where the postcode is the same. These are the rows i want to combine
So shortly:
Transportnumber double/triple...+ Postcode double/triple...= combine these rows.
if only transport number is double, or only postcode, then dont combine. I want it to combine 2 columns of values, one will b the kgs, other one a price.
So example of end result for 106200 would be
106200 8500 value+value (these 2 rows matched so it combined the 2 values i want it to)
106200 8600 value ( this was unique so it stays unique)
View 4 Replies
View Related
Jul 10, 2014
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
View 6 Replies
View Related
Sep 26, 2008
I am stumped on how to transpose multiple columns to rows based on specific criteria. Here is an example of the data I am working with:
Acct #Rev CodeUnitsCharges10094537034503$0.0010094537034501$605.0010094537037101$0.0010096359034503$0.0010096359034501$355.0010096359037101$0.00
I want it to look like the following:
Acct #Rev CodeUnitsChargesRev CodeUnitsChargesRev CodeUnitsCharges10094537034503$0.004501$605.007101$0.0010096359034503$0.004501$355.007101$0.00
I should note that there is oftentimes more than three rows for the same account number, sometimes it could be as many as 20 rows for the same account.
View 11 Replies
View Related
Apr 9, 2009
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
View 9 Replies
View Related
Jan 29, 2009
I'm trying to create a formula (used in sheet 2 column B) that would generate the results in sheet2.B based on the contents of sheet 1. sheet2.B2 would contain a formula searching for the both "Y" in sheet1.C and the text in sheet2.A2 (in this case "E&P"). When each match is found, the contents of sheet1.A should be returned to sheet2.B, as shown in the mockup. There will be multiple matches (at least 15-20) for each search criteria, and I don't know how many there will be ahead of time.
I've tried various formulas, and they either have incorrect syntax and return every row in a range, or only return the first match correct match each time instead of all correct matches. I found some UDFs posted online that claim to do this, but I've gotten them into the spreadsheet and they generate # NUM errors. I would prefer to work with Excel-native formulas if possible, because I'm going to eventually hand this off to someone else to maintain and they may not have the level of expertise to deal with UDFs.
View 4 Replies
View Related
Feb 29, 2008
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
View 4 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Feb 16, 2010
I have data on a worksheet (“Interface”) that I need to copy over 7 other tabs for analysis.
("Module_1", "Module_2", "Module_3", "Module_4", "Module_5", "Module_6", "Module_7").
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row
Module 1Medication Management
Module 2Privacy
Module 3Process
Module 4Patient Safety
Module 5Medical Records
Module 6Infection Control
Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
View 2 Replies
View Related
May 23, 2012
I would like to hide rows for data that does not meet specific criteria. For example: If a user selects room number 101 from a drop down in B1, I want to filter data in range A3:F1000 to show me only room 101 rows (A column) where C column contains a value larger than zero OR D column contains a value larger than zero OR E column contains a value larger than zero. I do not want it to return rows where 101 may be in other columns beside A.
Sample:
A B C D E F
__________________________________
1 ROOM: 101
2
3
4 101 XX 1.2 0 0 P
16 101 YA 0 0 1.1 L
23 101 JJ 3.2 2.1 0 L
55 101 JJ 0 0 1 P
So, if a row contains 101 in column A and all three values in columns C, D, and E equal 0, then those rows will be hidden.
View 8 Replies
View Related
Jun 20, 2008
I have a table with column headings of product ID Numbers (eg.1111) and row headings of Store number (Eg.1) with data showing the time each product was last sold at that store, I need something to consolidate for each store which Product ID's were sold prior to 5pm and what time they were sold.
EG
Store 1 1111 16:40
2222 13:00
Store 2 1111 15:05
3333 16:50
View 9 Replies
View Related
Apr 21, 2007
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
View 7 Replies
View Related
Apr 15, 2008
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
View 6 Replies
View Related
Mar 10, 2013
This is what I am trying to achieve:
1) Prompt user to select a file (or multiple files)
2) Copy the files that meet certain criteria to a folder
My attempt (fail):
VB:
Sub FILES2SFTP() Dim FileNames As Variant Dim I As Integer Dim fso As Variant Dim Data As String ChDrive "G:" ChDir "G:TEST" Data = InputBox("Enter the date", "Enter the date", Format(Application.WorksheetFunction.WorkDay(Date, -1), "yyyymmdd")) Set fso = [code]....
I get error 424 object not found in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
View 3 Replies
View Related
Sep 27, 2011
Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria
Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane
2.06.06.04.0Smith, John
7.010.02.06.0Tucker, Chris
19.039.05.017.0Sandler, Adam
15.011.06.010.0Iglesias, Gabriel
8.03.06.010.5Smith, Will
8.03.06.06.5Powers, Austin
10.025.07.09.0
View 1 Replies
View Related
Jul 27, 2013
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 01:00 AM 9 10 11 12
Sheet 2
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 12:30 AM
7/27/13 12:45 AM
7/27/13 01:00 AM 9 10 11 12
View 1 Replies
View Related
Apr 25, 2014
I am trying to write a macro in VBA excel 2010 that compares 2 sheets.
The macro should be something along the lines of if column 7 on sheet 1 = column 1 on sheet 2
AND
on that same row if column 6 on sheet 1 = column 3 on sheet 2
highlight green
** also on sheet1 there can be the same batch ID so if it is the same batch ID it needs to calculate the sum and look at that amount...
Sheet1:
settleid
min Tran Date
Payment Vehicle
total Deposit
total CF
total MRI
RMBATCHID
475-T
03/03/2014
Connect
$562.95
$19.95
$543.00
6G000001450835
[Code] .......
Results >
Sheet1:
settleid
min Tran Date
Payment Vehicle
total Deposit
total CF
total MRI
RMBATCHID
475-T
03/03/2014
Connect
$562.95
$19.95
$543.00
6G000001450835
[Code] ..........
View 9 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Aug 19, 2009
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F
Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
View 11 Replies
View Related
