Copy Rows To Another Worksheet Based Upon Multiple Criteria
Apr 8, 2009
I have seen all kinds of copying routines, but haven't been able to get what I want.
1. Copy Row contents from activeworksheet
2. The activeworksheet will have various row counts
3. The activeworksheet has row 1 as header.
4. The criteria to use is in the current worksheet columns P through Z
5. The criteria to look for is the word inspect. only the word inspect, not words that contain inspect (i.e. "inspection") should not be found.
6. The word could be in column P and in S, but needs to be only copied once, becuase it has meet the criteria, but it also could only be in c
7. Copying the row into a Sheet named "Inspection"
As a bonus would be cool to be able to copy certain cells or the entire row.
View 9 Replies
ADVERTISEMENT
Dec 17, 2008
I need a macro that will search data from a range of cells in one column for multiple criterias and them copy the entire rows to a new worksheet.
Example I have a list of group names
Network
Telcom
Help Desk
BA
Network
I only want to choose all Network and Telcom rows copy to another worksheet.
View 9 Replies
View Related
Oct 31, 2006
I am trying to loop through a column and cut and copy cells containing one of ten or more criteria (text strings) to the next worksheet, which already exists.
The basic loop is set up, and I understand that an array for the multiple criteria is needed but am falling at this hurdle, as well as struggling with the routine to copy the row to the next available row on the next worksheet.
I have omitted to post my effort so far, as it's embarrassingly basic, but can anyone help with the code?
View 9 Replies
View Related
Sep 27, 2011
Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria
Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane
2.06.06.04.0Smith, John
7.010.02.06.0Tucker, Chris
19.039.05.017.0Sandler, Adam
15.011.06.010.0Iglesias, Gabriel
8.03.06.010.5Smith, Will
8.03.06.06.5Powers, Austin
10.025.07.09.0
View 1 Replies
View Related
Nov 20, 2012
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
View 5 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Dec 15, 2009
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
View 11 Replies
View Related
Dec 18, 2006
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run.
2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L
3. In Column D, I want to specify 3 criterias namely A, B and C
4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo
5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
View 9 Replies
View Related
Sep 28, 2006
Data exists in a workbook's sheet name "0293" in columns A, B, C, & D. If a row's value in column B exceeds zero, the entire row & formatting needs to be added to the bottom of data in a sheet called "Comprehensive" of the same workbook and put 0293 in column E of the same row. What would be the simplest VBA code to copy sheet 0293's data & add it to the "Comprehensive" sheet with the sheet name in column E of the same row?
View 2 Replies
View Related
May 26, 2009
I have requirement to extact data into a spreadsheet. This data is extracted from CSV file which is huge normally over 7MB. I have found a macro on the internet which I have included with this post.
Sub split()
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g. test.txt")
'Check for no entry
If FileName = "" Then End
'Get Next Available File Handle Number
FileNum = FreeFile()
'Open Text File For Input
Open FileName For Input As #FileNum .................
I have also included reult data that I get after running the macro. I have cut down on data due to attachement restrictions. But usually there are multiple spreadsheets named "Sheet1, Sheet2, Sheet3 and so on". I have numerous requirements. First of all I want to be able to spreate data into columns. For now how I do that is by going to data -> text to columns and then selcting delmited and then selecting comma as my delimiter. Second thing I want to do is is only extract range of data from this output into a new worksheet. I am only interest in the name like for example ALBANY-Serial0/0/0 and data that is in the range of 8:00 AM to 6:00PM. So the new sheet should only have name and for that name data in the range of 8:00AM to 6:00PM for all the sheets "sheet1, sheet2 etc" until all data has been extracted.
View 7 Replies
View Related
Feb 11, 2009
I have an excel workbook with 5 sheets, the first called 'data drop sheet' & the others called 'Louise', 'Thor', 'Peter' & 'Steve'. In the data drop sheet, the first row is header data and underneath (A2 onwards) are rows of data that I have cut & pasted in. The first column (A) of this data will be the person's name, e.g. Louise Wilson.
I want to be able to move the rows for each person to their respective sheets, starting from row 2 as the first is a header. So, for example, if 'data drop sheet' cell A2 says Steve Brady, I want it to copy the whole line to sheet 'Steve' row 2 etc.
View 5 Replies
View Related
Jun 1, 2008
I am trying to query a names sheet where each row may contain more than one occurence of a member ID. There are no duplicate rows ( records), because the dates are different for all rows.
1. I want to retrieve all of the rows from the names sheet that match a unique member ID. So far I only get one row.
2. And if mistype the number, it gives me a wrong record .I would like to get an error message that if I don't get a match, that it appears in the somewhere like dialog box or even entry in one of the cells that no name exits.
View 4 Replies
View Related
Aug 4, 2009
I have been struggling to setup these two workbooks for a bit now, and I can't for the life of me figure out a formula to do what I need to do. Essentially, I have one workbook that contains a list of purchase records for my company, sortable by Date, Vendor, Price, etc. and one workbook that has a sheet for every vendor. What I need is a formula that will search column B for a vendor, Allied Waste for example, and transfer all the information within the rows for every instance that vendor is found to the new workbook.
This is basically just a way where I can input information once in one workbook, where the sheets are divided by month, and the info will automatically transfer to another workbook, where the sheets are divided by vendor.
View 2 Replies
View Related
Jul 14, 2006
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range
Dim strFirstAddress As String
With Sheet4.UsedRange
Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If ..................
View 9 Replies
View Related
Oct 29, 2013
There is no where else for me to go. My problem is: I have a table with over 30,000 rows and columns A - W. The first column A contains UNIQUE ID. Column G contains CATEGORY CODE.
Example.png
Since Unique ID (column A) can be listed more than ones, I need to select only those records (rows) that correspond to the following: Category Code (column G) is either 14, 15, 16, 17, 18 and not any other. I hope you can see the attachment, UNIQUE ID = a;does not satisfy my criteria as it does contain Category Code 14, it also contain other codes. The final result from the sample provided would be extracting data for UNIQUE ID = e (since it is the only record that does not contain any values other than 14, 15, 16, 17, 18).
View 6 Replies
View Related
Mar 19, 2007
Example attached. I need to filter rows based on a start date and stop date, columns C and D. So for example the filter date is 01Mar07 (located in A5). As this date in this cell is changed the rows are filtered accordingly. I need to filter rows so that any row with a start date which includes Mar 07 is shown and I need to include all rows that have an end date in Mar 07. This would result in the inclusion of an event that started in Feb and Ends in march being displayed.
Additionally, I would need to clear the filter. I'm just starting out, I'm sure this is easy for you all the excel experts., and you may probably have a better method to approach this.
View 2 Replies
View Related
Jan 30, 2008
I have on sheet1 of my workbook a number of rows of data, from column A through Column G. The Data in column G either contains the text "Yes", or "No".
I need a macro that will look through each row in this sheet, and upon finding a "Yes" in the cell in the column G, will copy that entire row (columns A through G) into a new row in sheet2. Sheet2 currently contains data, so I'd like to move everything down by one row and paste this data at the top (row 6 is the first line of data on this sheet).
I'd then like to go back to sheet 1, and delete the row I've just copied. Then continue though the loop. The loop needs to stop when a blank row is discovered.
View 5 Replies
View Related
Jul 31, 2008
I'm not sure that I'll be able to explain this clearly, so I've attached an example. There are 3 columns - Issue, Action Group and Status. Many Issues belong to the same Action Group and others do not belong to any Action Group. The is also a Status summary section that has the total Issues and Actions associated with each status. For example the Status called Resolved could have 10 issues and 5 Actions (including blanks). The problem is that I can't figure out a way to get the total for the Actions. As I said this explanantion isn't great, so the attached sheet
View 3 Replies
View Related
Apr 18, 2014
I have a table based on transport numbers who sometimes have doubles. Example:
Number Postcode Value1 Value 2...
106200 8500 10
106200 8500 5
106200 8600 6
106201 5500 4
106202 4000 1
106202 4000 1
So it works as following:
A transportnumber can have multiple instances of itself, such as 106200. This transport number can also have multiple instances where the postcode is the same. These are the rows i want to combine
So shortly:
Transportnumber double/triple...+ Postcode double/triple...= combine these rows.
if only transport number is double, or only postcode, then dont combine. I want it to combine 2 columns of values, one will b the kgs, other one a price.
So example of end result for 106200 would be
106200 8500 value+value (these 2 rows matched so it combined the 2 values i want it to)
106200 8600 value ( this was unique so it stays unique)
View 4 Replies
View Related
Jul 10, 2014
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
View 6 Replies
View Related
Sep 26, 2008
I am stumped on how to transpose multiple columns to rows based on specific criteria. Here is an example of the data I am working with:
Acct #Rev CodeUnitsCharges10094537034503$0.0010094537034501$605.0010094537037101$0.0010096359034503$0.0010096359034501$355.0010096359037101$0.00
I want it to look like the following:
Acct #Rev CodeUnitsChargesRev CodeUnitsChargesRev CodeUnitsCharges10094537034503$0.004501$605.007101$0.0010096359034503$0.004501$355.007101$0.00
I should note that there is oftentimes more than three rows for the same account number, sometimes it could be as many as 20 rows for the same account.
View 11 Replies
View Related
Apr 9, 2009
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
View 9 Replies
View Related
Jan 29, 2009
I'm trying to create a formula (used in sheet 2 column B) that would generate the results in sheet2.B based on the contents of sheet 1. sheet2.B2 would contain a formula searching for the both "Y" in sheet1.C and the text in sheet2.A2 (in this case "E&P"). When each match is found, the contents of sheet1.A should be returned to sheet2.B, as shown in the mockup. There will be multiple matches (at least 15-20) for each search criteria, and I don't know how many there will be ahead of time.
I've tried various formulas, and they either have incorrect syntax and return every row in a range, or only return the first match correct match each time instead of all correct matches. I found some UDFs posted online that claim to do this, but I've gotten them into the spreadsheet and they generate # NUM errors. I would prefer to work with Excel-native formulas if possible, because I'm going to eventually hand this off to someone else to maintain and they may not have the level of expertise to deal with UDFs.
View 4 Replies
View Related
Feb 29, 2008
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
View 4 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Feb 16, 2010
I have data on a worksheet (“Interface”) that I need to copy over 7 other tabs for analysis.
("Module_1", "Module_2", "Module_3", "Module_4", "Module_5", "Module_6", "Module_7").
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row
Module 1Medication Management
Module 2Privacy
Module 3Process
Module 4Patient Safety
Module 5Medical Records
Module 6Infection Control
Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
View 2 Replies
View Related
Jul 21, 2013
is it possible to Copy Rows to a multiple tabs on a New Worksheet using a start date and end date as reference?
I have a button (named Draw Report) on the Raw Data xls. should copy tickets uniquely on a new workbook, by uniquely - no duplicates on the new workbook on a given date range.
Will it be possible to separate them into tabs according to values under Assigned to (Transaction 1, 2, 3)?
Could we also copy the exact 2nd worksheet (Report) on the Raw Data xls on the Output.xls?
The Output would contain 4 tabs: Report, Transaction 1, Transaction 2, Transaction 3)
View 1 Replies
View Related
Aug 10, 2014
I am making a workbook for our 4H horse shows. I want to be able to list the kids on the first page and check off (x in the cell) which classes they will be entering and then have the program move their info to each of the specific class worksheets where we will record the results. I'd like to move rows A thru E to each applicable class sheet. I've attached the workbook.
View 6 Replies
View Related
Sep 18, 2009
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
View 5 Replies
View Related
