I have autofiltered a selection of data then issued the copy command in the code below so as to copy the visible area. In attempting to paste the data in the first blank row the program fails on the last code statement, "ActiveSheet.Paste".
The error is 1004.
An alternative suggested in the error message is to select an area the same shape and size as that being copied to paste into. Given that the copied data will change on each run how might I do this, and is this a valid alternative?
Selection.AutoFilter
Selection.AutoFilter Field:=7, Criteria1:="=TC", Operator:=xlAnd
Selection.AutoFilter Field:=2, Criteria1:=">=7330", Operator:=xlAnd
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Range("A" & LR + 1).Select
ActiveSheet.Paste
NB. most of the code has been generated by the Macro recorder.
The VB for a macro to select only the rows/cells within an autofiltered selection. So if I Autofiltered this set of data by Column F where Lookup = NO it would only display Rows 3 & Row 7.
I would want the Macro then to select only these rows, then copy/paste them to another Worksheet called "Static".
************************************************************************>Microsoft Excel - Book2___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF2F3F4F5F6F7F8F9F10=ABCDEF1Incident #Entry DateReceived Date# of days, Entry to ReceivedInst Act #Lookup2123456-102/16/0902/24/098A1YES3654321-202/17/0902/19/092A2NO4456125-102/17/0902/25/098A3YES5345678-302/17/0902/25/098A4YES6123456-202/17/0902/23/096A1YES7654321-302/17/0902/23/096A2NO8456125-202/17/0902/23/096A3YES9345678-402/17/0902/23/096A4YES10123456-302/17/0902/25/098A1YESSheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab. 2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up). 3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C). 4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case). 5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
I'm working in a rather large (20meg) Excel file with multiple worksheets, references, formatting, etc.
Suddenly, when I attempt to Copy > Paste Special > Formats using more than a few cells at a time, I receive this error message...
"Selection is too large."
That's it - no reference, no nothing. Doesn't matter if I select a few cells, or entire rows, I get the same message everytime. However, I can copy-n-paste the entire 8000+ rows of data into a NEW file with no problems whatsoever. It handles everything - data, formatting, formulas, etc. But within my working file (same worksheet even) I get the error everytime.
I'm not using a macro. This file has worked fine for months. I'm doing absolutely nothing differently than ever before. This error literally just started today.
I know there is some issue with copy/paste of 8100+ non-contiguos cells, but I'm using contiguos cells. And again, I can copy nearly 10K entire rows of data and paste into a new workbook - just not within the same workbook and worksheet.
I've searched online - here, Mr.Excel, Microsoft, everywhere I can think of. Of all the problems I've found answers too, I have yet to find ANYTHING dealing with this problem - except in the context of a macro, which I am not using.
Autofilter going across several columns in Sheet1, I want the values represented in a certain autofilter pasted into another Column in Sheet2. For example: I want the values in the autofilter for column B in Sheet 1 to be pasted into column H in Sheet 2. Assuming there are 10 values in autofilter column B they would be pasted into cells H1 to H10 in Sheet 2.
I have two sheets that I am using. sheet 2 has a list of experiments in column C with information regarding the experiment in columns F - J. On sheet 1 I have a dropdown box with a list of all the experiments. When I select an experiment from the dropdown box I would like to populate columns K - O on sheet 1 with the information from columns F - J for the selected experiment on sheet 2.
I want to filter the data and next. I want to copy the data from sheet1 to sheet2; below code working fine, but.
Sub CopyFilter() Dim rng As Range Dim rng2 As Range With ActiveSheet.AutoFilter.Range On Error Resume Next Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _ .SpecialCells(xlCellTypeVisible) On Error Goto 0 End With If rng2 Is Nothing Then MsgBox "No data to copy" Else.............................
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB: Sub CopyRow() Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0) End Sub
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?
Example
Col A Col B Col C SN0001 1/31/2013 1/15/2013
[Code]...
I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.
This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
I have the following problem at work and been spending way too much time with it, I have four active tabs: "1","2',"3" and "summary" I would like to copy all data using the "usedrange" function from "1" and copy it into "summary". This works well until I want to do the same with tab "2" and paste it UNDER what I have already pasted in "summary". This is difficult as the data in "1","2" and "3" is continually updated and thus has no well defined range!
On another worksheet, I have multiple comboboxes from the Controls toolbar in a column, each having possible selections are based on the data in a column 1 above (ie. A,B,C). When a selection is made in any of these comboboxes, cells to the right of the combobox get populated with the corresponding remaining data from the above cell range - ie. when A is selected, 1,2,3 appears to the right of the combobox, when B is selected, 4,5,6, etc. I want to be able to make selections from within combo boxes, not only by using the combo box dropdown and select mechanism, but also, if possible, by pasting a cell range whose data matches one of the existing selections available in the combobox definition. In other words, if I have a single column cell range from somewhere with the following data in 1 row:...............
I need a macro that can cut and paste a selection of 3 cells to a location one row above and 3 cells to the left. I want to run it each time manually from the right cell among the 3. the macro should therefore (when standing on the right cell of the 3):
1. select 2 more cells to the left 2. cut the selection 3. move 3 cells to the left and one cell up 4. paste 5. move the cursor back to the starting location
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
The attached sample is a simple version of the sheet that I'm using. The buttons are triggering preset auto-filters (try pressing the colored buttons, those work for sure :D). Is it possible to only show the number of rows that is input in the textbox - regardless of the actual row number, just count the first "x" visible rows and not show anything else. In O3 I tried to make a sample of the desired result. So ideally I will be able to press one of the colored buttons and then type in the number of rows that I want to see.
I want to create a macro that will take information from one worksheet to another. The problem is that the first worksheet has an autofilter and i do not know how copy information only from the cells that were filtered with the correct information without copying it manually.
I have the following vb to insert a row above every row in an autofiltered list (autofiltered for nonblanks).
Problem is that if in the autofiltered list there is not a gap then it inserts a row for each line where there is no gap
SO for instance if in the filtered list cell A500:a505 have no gaps between them (meaning all are nonblanks) the vb will insert 6 rows above A500 and leave no rows inserted above a501, a502, ...etc
I have approx 10,000+ rows and there are approx 550 rows that I need to insert a row above (but want to automate/save time) by having the vb do it.
Code: Sub InsertRow() ' Insert a row between each Client/Cycle 'Will have some manual cleanup after this step
