I want to copy a selection of cells and paste them into a row on another
sheet.
An example would be to copy:
Sheets("Sheet1").Range("T5,C7:T9,T13,C15:T17,T19,C21:T23")
and put it into A4:F4 on Sheet2
I know I can do it one cell at a time but I was hoping that I could speed
things up and do it all in one go as the macro will be quite long.
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
I have autofiltered a selection of data then issued the copy command in the code below so as to copy the visible area. In attempting to paste the data in the first blank row the program fails on the last code statement, "ActiveSheet.Paste".
The error is 1004.
An alternative suggested in the error message is to select an area the same shape and size as that being copied to paste into. Given that the copied data will change on each run how might I do this, and is this a valid alternative?
Selection.AutoFilter
Selection.AutoFilter Field:=7, Criteria1:="=TC", Operator:=xlAnd
Selection.AutoFilter Field:=2, Criteria1:=">=7330", Operator:=xlAnd
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Range("A" & LR + 1).Select
ActiveSheet.Paste
NB. most of the code has been generated by the Macro recorder.
Copy paste macro that I'm using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.
Simple loop macro.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab.
2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up).
3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C).
4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case).
5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
I'm working in a rather large (20meg) Excel file with multiple worksheets, references, formatting, etc.
Suddenly, when I attempt to Copy > Paste Special > Formats using more than a few cells at a time, I receive this error message...
"Selection is too large."
That's it - no reference, no nothing. Doesn't matter if I select a few cells, or entire rows, I get the same message everytime. However, I can copy-n-paste the entire 8000+ rows of data into a NEW file with no problems whatsoever. It handles everything - data, formatting, formulas, etc. But within my working file (same worksheet even) I get the error everytime.
I'm not using a macro. This file has worked fine for months. I'm doing absolutely nothing differently than ever before. This error literally just started today.
I know there is some issue with copy/paste of 8100+ non-contiguos cells, but I'm using contiguos cells. And again, I can copy nearly 10K entire rows of data and paste into a new workbook - just not within the same workbook and worksheet.
I've searched online - here, Mr.Excel, Microsoft, everywhere I can think of. Of all the problems I've found answers too, I have yet to find ANYTHING dealing with this problem - except in the context of a macro, which I am not using.
I have two sheets that I am using. sheet 2 has a list of experiments in column C with information regarding the experiment in columns F - J. On sheet 1 I have a dropdown box with a list of all the experiments. When I select an experiment from the dropdown box I would like to populate columns K - O on sheet 1 with the information from columns F - J for the selected experiment on sheet 2.
View 9 Replies View RelatedI have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB:
Sub CopyRow()
Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0)
End Sub
I am working on a macro, which asks the required field from multi select list box.
User can select required field, for example some user may be interested in
Region ID, Circle, BSC ID, Cell ID, Sector ID, City/Town.
Some user may be interested in Circle, BSC ID, Cell ID, Sector ID, City/Town.
Some user may be interested in BSC ID, Cell ID, Sector ID.
In sort, Selection on a multi select list box copy and paste that field from any folder.
That folder may have any location, and contains file which have.
Date
Vendor
Region ID
Circle
BSC ID
[Code] .....
I have 8 different files all have a set of data in them
each one has a long list of (column a-n) however the number of rows change by date. I need each file copied into the finalfile.xls one after another. in the files that will be merged into the final file the final row i need copied is blank.
I have all the copy formulas and everything set, I just need a range to copy that automaticaly takes cell a10 to the first blank a cell from each file and pastes it in the finalfile.xls under the last paste so they dont over write each other.
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I have a file for monthly result of different staffs (over 1000 of them) shown in Col A. Their monthly result are obtained by Vlookup, then copy and pasted in Col B. The staffs are arranged in groups, and each of those groups usually no more then 10 persons. What I usually do is the follow steps:
(1) Input the Vlookup in, say for Feb, C1, then drag the corner of the cell and pull down as copying the formula to the bottom cell (this will create errors in the S Total rows (row 8, 13, 19 etc) but will overcome later).
(2) Select the entire Col C, then copy and paste value, to make all the data into a value.
(3) Select the S Total cell from the previous month (B8, B13, B19 etc), drag the corner of the cell, and pull to the respective S Total cell in current month (C8, C13, C19 etc). This will copy the sum of each group formula from previous month column to the current month column. And also it can clear out the errors generated by step (1) above.
Due to the size of the staffs, I have over 300 repetitions of doing step (3). It is so time
consuming, and I feel like an idiot. As you know, Excel 2003 does not allow multiple copy and paste. I have tried grouping the staffs, hide details, then do the copy and paste but unsuccessful because it will be multiple and paste as well. I cannot change the format of the table because many others will use this table too.
I have created a named range that selects about 30 different cells (non-contiguous) and I am trying to copy over all the formulas and paste with values. However excel is not letting me to do this. It says this command cannot be applied to multiple selections. Can I get around this?
View 3 Replies View RelatedI am trying to write a basic VBA code to effectively remove the formulas from a workbook to reduce the size. I want to save the formulas in one hidden row above the data and have the macro select this row, copy the formulas down to the data, calculate the sheet, and then copy and paste the new calculated info and paste as values
Issues making this more difficult:
1) The number of rows of data is not constant, therefore I believe I need to make vba count the rows of data and therefore know how many rows to paste
2) The formulas are not in every column (E.g. A:C, E:R, AA:AD have formulas)
Here is a basic example:
A B C D E
1 FORMULAS (Hidden)
2
3 [Inv. Typ] [Material #] [Batch] [Qty] [$]
4 [FG] [545] [555A] [5000] [$250000]
5 [WIP] [984] [659A] [200] [$650000]
In this example I would like the macro to:
1) Copy the hidden formulas in (A1:B1, D1:E1)
2) Paste these formulas into the range (A4:B5, D4:E5) (*The height of this range is not constant)
3) Calculate the Worksheet
4) Copy and paste values to the range (A4:B5, D4:E5) (*The height of this range is not constant)
* I would like column C to be left alone.
I would like to create a formula on sheet 1 and be able to copy and paste it to 20 sheets in the same workbook.
View 2 Replies View RelatedI want to copy several separate sections on a worksheet and place these sequentially in an array, then paste these in order into another worksheet.
I have written a macro to copy and paste between the two spreadsheets, however, this is rather basic as it involves straddling between the two and performing multiple alternate copy and paste operations, as only one section can be copied at any one time.
I am importing some text files into an excel worksheet. I want to change the format just a little bit. For each date I have 5 rows (pixel: 25, 37, 50, 100, and 200). When I import my data the date is in the same row as my pixel numbers. I want to place the date in another column to the left of these pixel numbers.
Below is an example of my "spreadsheet" The first 5 lines (with date "2008_308.txt" next to each pixel number is what I want it to look like and the next (with date "2008_309.txt" is how it is imported with only one date above the pixel numbers. I could do this manually, but I have many years of data to import. And would like a way to kind of copy/paste these multiple items at the same time. Any ideas? .......
I've coded wrong. I get "Run-time error 424: Object required" when I run it.
Dim ws As Worksheet
x = 0
For Each ws In Worksheets
Select Case UCase(wSheet. Name)
Case "SAMPLE RESOLVED", "RESCALLTYPE", "DATA", "SUMMARY"
'Do nothing
Case Else
ws.Range("J22").Copy Destination:=Sheets("Summary").Range("B2").Offset(x, 0)
ws.Range("C3").Copy Destination:=Sheets("Summary").Range("A2").Offset(x, 0)
x = x + 1
End Select
Next ws
i am trying to create an invoice with the data from one sheet(invoice list1)to copy this and populate an invoice that i have in another workbook(invoice)
i need to generate for however many lines there is in the invoice list the equivalent number of invoices.
ie the data in list will be copied to relevant cells in invoice so
cell A4, A5 FROM (INVOICE LIST1) will go to cell B10, C10 of ("invoice" workbook)
cell E4 and f4 go FROM (INVOICE LIST1) go to cell b11,b12 ("invoice" workbook)
and cell g4(invoivelist1) will go to d12 of "invoivce"
i will attach the workbooks
I need to copy from AS400 (ISearies) to Excel, return to AS400 and repeate a number of times for a specific AS400 layout. (Example) I would copy for AS400 row 7, column 2 thru row 7 column 10 then paste to Excel A1, repeate for row 8, column 5 thru row 8 column 15 and paste to A2, ETC. I need to keep repeting this about 20 times. I have a group of employees who do this all day. A Macro would speed work.
View 2 Replies View RelatedI have a workbook with 6 worksheets in, 5 worksheets contain data whilst the 6th I will use as a search worksheet. The 5 data worksheets contain columns A to J which have text entries in.
What I would like to click a button on the search worksheet, lets call it worksheet 1, and for an inputbox to allow the user to enter a text search. The macro would then search for this text in columns A to J and all rows (or rows with data in) on the 5 data worksheets, and if found, copy the entire contents of those rows where the text is found and paste them into worksheet 1, the search sheet.
I have done a forum search and found a few examples of this type of search but not across multiple worksheets, also I found this code that does search across multiple sheets but does not copy and paste:
VB:
Sub Find_Data()
Dim datatoFind
Dim sheetCount As Integer
Dim counter As Integer
[Code]....
Basically on the file below whenever there is data in column "type" I want excel to copy the "name" and "account" next to it. The whole file has about 80,000 rows. Spacing is not always one blank row between accounts. I am using excel 2007.
View 5 Replies View RelatedHow can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies View RelatedI have the following VBA code in Excel that looks in sheet called mri.txt for a cell called “AcquisitionMatrix”, Then goes one cell down and two cell to left and copy them all into Application.Workbooks(imgMain).Worksheets("Sheet1").Activate cell “AC2”, But for some reason it copies the field’s name as well such as:
AcquisitionMatrix , 0, , 256, , 256,.
Is there a way to avoid copying the filed name into cell AC2? Such as :
0, , 256, , 256,?
here is the
I have a spreadsheet that contains data that is currently split up into 2 or more cells. Sometimes it's 2 cells, sometimes 3, even 4, etc. I would like to right click on multiple adjacent cells, select copy, right click on another cell and paste these multiple cells into 1 cell. I checked paste special but didn't really find anything. I'm not sure a formula/macro would work either as I need to manually determine which cells need this attention.
View 2 Replies View RelatedThank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
I have to take data from about 10 rows and then paste them into ONE cell . . . any easy way of doing that without VBA or concatenating?
Example -
Move -
Jeff
Bob
Joe
Mary
into Jeff Bob Joe Mary
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
Sub MinerInfo()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
resultsRow = 2
[Code]...