Anyone see any problems with this code? I used this in another application and it seemed to work just fine? However now it isn't working I just changed the reference area's and changed the formula.
View 4 RepliesI am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedI need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedI have searched and unable to find how to keep a formula as a formula in a cell so I can copy it to other cells. Every time I enter a formula, example: =if(a2>0,trim(v2)&"."&trim(x2),"") the cell immediately displays the value and I am unable to copy the formula to other cells because I get the same value all the way down the sheet. Example star.plus, star.plus, star.plus... Every cell in the range should have a different value and change whenever the cells in column v or x change. I also tried entering this formula on another workbook which displays correctly the formula in a cell and then copying and attempting to paste onto the existing worksheet but the past and paste special are greyed out.
View 3 Replies View RelatedI have a vlookup formula that I want to copy from cell b16 to b30. How can I do that without excel adjusting all of the formula. The formula looks like this: =vlookup(b16,b1:b15,1,false). I want b16 to change with the cells but "b1:b15" I don't want to change. it should look like this in the worksheet
cell b16 =vlookup(b16,b1:b15,1,false)
cell b17 =vlookup(b17,b1:b15,1,false)
cell b18 =vlookup(b18,b1:b15,1,false)
cell b19 =vlookup(b19,b1:b15,1,false)
cell b20 =vlookup(b20,b1:b15,1,false)
cell b21 =vlookup(b21,b1:b15,1,false)
I need to change below formula
I want to copy formula form G7 to last blank cell of column G while below code copy formula g7:g100
[Code] ....
I have a code that paste my data into a new row.
At the same row I have a column with formulas, and I would like the macro to copy that formula into same column in next row.
Code:
LstRow = Bilag1.Range("C65536").End(xlUp).Row + 1
Bilag1.Cells(LstRow, "B") = Brreg.Range("B4").Value
Bilag1.Cells(LstRow, "A") = Brreg.Range("B5").Value
Bilag1.Cells(LstRow, "C") = Userform1.txtProjectNo.Value
This is what I have, and my formula is in column "D".
When I copy a formula from a cell into many cells in this way
rangeinit = Sheet2.Cells(srs1, scs1 + 2) & "2"
Sheet3.Range(rangeinit).Formula = Sheet2.Cells(srs1, scs1 + 8).Formula
rangetoextend = Sheet2.Cells(srs1, scs1 + 2) & "3" & ":" & Sheet2.Cells(srs1, scs1 + 2) & (lngRowsNumber + rowsheader)
Sheet3.Range(rangeinit).Select
I am working on a template for a team that requires me to create a format to be able to be paste on a PowerPoint presentation. The format for the PPT has been created by the board directors and need to stay that way. What I am trying to do is have the team members to populate one form that will feed different spreadsheets, but I am facing the issue that I need a formula or macro that will pull only the cells with values from column D to other table to column Q, in the next print screen you can see what my final goal is...
[URL] ...........
{=AVERAGE(IF(('Sales Reports'!$A$1:$A$5000=$A3)*('Sales Reports'!$C$1:$C$5000=$C$1),'Break Reports'!$D$1:$F$5000))}
and am copying it to other cells using this
Sub copyformula()
With Sheets("Sheet2")
.Range("B3:B5000").Formula = .Range("B3").Formula
End With
End Sub
It does the copy but removes the { and } thus rendering the formula useless to me. How can I accomplish this task and keep the formula as an array formula?
I tried to drag the formula down and recorded it as a macro but when it runs it takes far to long.
I have a formula that works fine when applied to a cell K9.
IF(ISBLANK($H9)=TRUE,"",(YEAR(TODAY())-YEAR($H9))*12+MONTH(TODAY())-MONTH($H9))
What I'm trying to accompish is through VBA is for this formula move to the next row if there is a value in the H column. So now if H10 has a date value in it then K9 will have the formula "IF(ISBLANK($H10)=TRUE,"",(YEAR(TODAY())-YEAR($H10))*12+MONTH(TODAY())-MONTH($H10))"
I need this to continue for each active row.
I found a few threads with similar questions but they seemed to do more than what I wanted to do or I'm just not using the correct search criteria. Thanks for any and all help with this matter.
We have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following
Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100
If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.
I am trying to finish off a form that allows a user to insert a row below the selected cell and copy the formula from the line above if one exists. The code inserts the line but does not copy the formulas if they exist.
Application. ScreenUpdating = False
Dim cRow
Dim j As Long
cRow = ActiveCell.Row
With ActiveCell
.EntireRow.Insert
End With
For j = 1 To Cells(1, 255).End(xlToLeft).Column
If Cells(cRow, j).HasFormula Then Cells(cRow, j).Copy Cells(cRow + 1, j)
Next j
I need some come code for a macro to copy a formula down a set of cells (I want to highlight a set of cells then run macro). I've looked all over the web, and the ones that looked right didn't work. I'm afraid I don't have enough experience yet to edit them.
In detail: Have cells b2 down list the price of an item
Have C down list item price plus VAT
Create a formula in C2 (ie =(b2/100)*117.5
Copy C2 to all rows with a value > 0
Create a macro where I highlight cells to apply this macro to
This is all in aid of an interview tomorrow, so if I'm lucky, I can spend more time afterwards learning this stuff. I get the principles, just don't know the language enough yet.
Need Excel Macro or Formula for finding duplicated cells more than 5 times and copy them into new sheet.
For Example;
apple
orange
apple
banana
apricot
[Code]...
OUTPUT in new Sheet will be
apple 5
orange 5
I have a list of data in columns Q R S and i need to in between each line insert the data from columns D E F underneath and then underneath that the data from G H I
so bascially i have a list at the moment like this
Q
R
S
[Code]....
There is 2 sheets in total , 1 i need to inc 1-1 draw as above and the other sheet to be exc the 1-1 draw . I have attached an example of what i am trying to achieve . can offer as i have had this on excelforum.com with over 150 views and no solution
I am creating a spreadsheet which creates a bulk of data from a front sheet.
The question is:
Is there a way to automatically copy a fixed formula for 100 cells using one fixed cell reference such as $A$1 and then automatically after 100 cells replace $A$1 with $A$2, after another 100 with $A$3 and so on?
Explanation with Example:
For example, Sheet1 contains the words "Green Tree" in Cell A1 and Sheet2 will then place "Green Tree" into 100 different sentences such as:
Plant a Green Tree
Grow a Green Tree today
This would be created with the formula ="Grow a "&'Sheet1'!$A$1& " today"
After 100 different variations using the formula I want to change that formula to reference cell A2 on Sheet1.
I know if I place "Red Tree" in Cell A2 and use the formula ="Grow a "&'Sheet1'!$A$2& " today" I can do this manually using find and replace for the 100 cells, but I want to do this for 100 different variations of Green Tree to create a 10,000 different sentences so I'd need to find and replace 100 times!
I have a worksheet (Data) that lists when pupils are in for Nursery sessions during the week. If they are in they have a 3 (hours) by their name in the relevant columns.
In the AM worksheet I now need to pull through a "register" so under each daily heading I need to pull through everyone that has a 3 next to their name under Monday AM / Tuesday AM / Wednesday AM etc. from the Data sheet. However, I don't want it to copy any blank cells. I then need to do the same for the PM sheet.
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
Wanted to know if there is a macro that can copy the selection of cells and paste it as a formula with original cell refernce.
For Example :
Copy Selection Cells - Say Cells A1 B1 & C1
and Paste It as formula In Cell D1 as =A1+B1+C1
I have a macro that inserts a formula on the first row and then copies it down. The problem is the row count is variable but I know it won't exceed 5000 so I just copy it down 5000. For the blank rows I get the ugly #NAME, #VALUE, etc errors.
I know there are ways to supress those error messages, but how about a way so that the macro checks to see how many rows are populated so it doesn't copy down on the blank rows.
1. I have a list of data (Collated Data)
2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc
3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3).
4. I then want "TAF Form & Employee Name" to close.
5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form
6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
am making Excel for private use, i need the following makro to be active, here is the idea because i didnt yet work with makros at all:
If A1 = False
then Range B1:D1 will be locked cells
If A1 = True
then Range B1:D1 will be unlocked cells
Those rules apply to 1 day in the year.
the range A1:D1 will be copied about 400 so the makro should be active to each day separatly.
Check the picture attached for example of one day
how to copy the content of cells of different xcell files from a given directory into a single formatted xcell sheet.
View 9 Replies View RelatedI have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
I have to enter info daily in column H. What I wanted to do is as I finish entering info in cell H3, infomation in row 2(cell A2:E2) is copied and pasted down to row 3 (A3:E3) and will continue about 100 rows down daily.
View 4 Replies View Related