Copy From Validated Cell To Next Available Cell
Aug 15, 2008
I'm inputing quite a bit of data and need to copy certain elements into another sheet in the same workbook if a certain cell is valid.
For example, what I need to do is:
Each cell in column D can either be a Yes or No.
So if I enter Yes in D3 I need it to copy cells A3 and C3 into the next available row in Sheet 2. End result is that if there are 40 cells in Sheet 1 Column D that have Yes.
Then there are 40 rows that are now populated in Sheet 2
View 9 Replies
ADVERTISEMENT
Apr 5, 2014
Here is the Scenario what I am into.
Row 1 Col1 Col2 Col3 Col4 Col5 Col6 Total
Row 2 10 "A" 19 "A" 13 "A" 42
Row 3 1 "A" 9 "B" 10 "A" 11
I was trying to have a formula which would add all values in the total column of that row whose adjacent cell has "A" in it . I am not sure if I am clear enough in my explanation but my example above is more clear want I meant .
I tried posting the same post earlier but I guess I was able to explain the same . I was trying to put the formula which will give the total column with a value in which it all gives addition of those values who's adjacent cell as "A" in it in the row .
Col1
Col2
Col3
[Code].....
View 1 Replies
View Related
Mar 27, 2007
I have a macro that I am running "onentry" of a worksheet. The problem is that I have some cells that are validated to allow a list. If I manually type a word from the list in the validated cell the macro runs. However, if I make a selection from the list the macro does not run. I guess vba does not see my selection as an entry.
View 9 Replies
View Related
Jul 2, 2009
I have a worksheet containing a cell (say A1) that has a validated list of times (data/validation/list) where the cells in the list contain times in 8 minute increments. The user can select cell A1 and manually select any of the validated times from the list. A vlookup formula on this worksheet uses the content of cell A1 to look for this time in another section of the worksheet. When the time is selected manually, the vlookup formula works properly.
As part of a macro, the macro will change the time in cell A1. I do this in the macro by selecting and copying the desired time from the validation list and pasting it into A1. Cell A1 does change to the new value, however the vlookup formula that uses A1 shows a result of #N/A. If I manually change the time, it again works. I am looking for a way to have the macro change this cell to another time and for the vlookup formula to work as it should.
View 2 Replies
View Related
Dec 14, 2011
I have a Change Event macro that works properly. I also have several cells that contain a drop down list. If a user tries to enter an incorrect entry...the debug is triggered on my even change macro.
Here's the piece of the Change macro that has issues. Specifically, the .undo line highlights.
With Application
.ScreenUpdating = False
.EnableEvents = False
Set SelectedCell = ActiveCell
myTitle = Cells(Range("Titles").Row, Target.Column).Value
myRow = Target.Row
.Undo: myBefore = Target.Value
.Undo: myAfter = Target.Value
SelectedCell.Select
View 3 Replies
View Related
Oct 23, 2009
what is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
View 2 Replies
View Related
Mar 25, 2013
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
View 1 Replies
View Related
Aug 1, 2007
i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies
View Related
Mar 10, 2009
In Column G I have a Drop down list of dates. In Column H I want to show the month for the dates, as per when they are selected. I tried simple doing in cell H2 "=G2" they changing the format of the cell for just the month. which worked but for the cells in H that haven't had a dates selected yet it brings back January-00 all the way down. I need a way of getting rid of the January-00 but having the cells ready so that wen the date in G is selected the month auto appears in H.
View 2 Replies
View Related
Feb 20, 2008
i want to create a quote worksheet with a type of material validated list, a type of stock validated list, a volume of material sum, a cost per lb of material varible and a typ of stock % markup to quote stock material. i have a pdf of what i want it to look like i just need help formulating it. thanks. Auto Merged Post;here is a link to the pdf. i am not sure what to call what i want to do...
[url] Auto Merged Post;here is the xls file.
View 8 Replies
View Related
May 14, 2012
Do not use validated drop down lists in merged cells.
It will only be a matter of time before it breaks Excel.
(Both 2007 & 2010)
View 1 Replies
View Related
Aug 2, 2014
This area of my worksheet, Sheets("ACTIVITY").Range("AM2:AM172"), is currently populated by text values from a dynamic, validated list, 'DEL_2'.
Is there a simple way to effectively 'toggle' (on/off) data validation - maybe with right-click - in this area, so that the user can type what they want if their chosen option can't be found in DEL_2?
View 3 Replies
View Related
Apr 4, 2014
I need a formula that allows me to autofill a cell with "X" kind of data after I choose a validated data of Cell A1;
View 6 Replies
View Related
Jan 30, 2014
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
View 2 Replies
View Related
Apr 29, 2014
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
View 2 Replies
View Related
May 31, 2012
I have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
View 2 Replies
View Related
Jun 15, 2014
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
View 2 Replies
View Related
Feb 19, 2014
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
View 7 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Sep 17, 2013
I am working a project where I need to copy/insert a Row of data onto Sheet 3 if values from Sheet2 are located on Sheet1. Here is my code so far:
Option Explicit
Sub move_rows()
Dim ws As Worksheet
Dim ws1 As Worksheet
[Code].....
View 3 Replies
View Related
Sep 26, 2013
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
View 7 Replies
View Related
Jul 8, 2014
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
View 4 Replies
View Related
Sep 13, 2012
My workbook has sevaral sheets reresenting the payment methods used by our customers. Each sheet has a range of cells F9 to Q33 which should hold the value of payments for each working day. e.g. F9 represents April 1st, F10 represents April 2nd.
A daily list of values is supplied which then transfers that day's value into cell E1 on each sheet.
On each sheet I manually have to take the value in E1 and copy and paste special: value into that day's cell e.g. today I will paste into cell K21. The cell value then looks like this '12134.12'. I then edit the cell to put a calculation on the end to divide the value by the value in another cell on the sheet. The cell value ends up like this '=12134.12/$G$5'. This is so I can see the values in thousands of pounds or by changing the value of G5 to 1,000,000 in millions.
Tomorrow I will do the same but in cell K22.
I have to do this on 15 worksheets and I have been struggling to get a macro together to do this. I can get as far as copying and pasting but I don't know how to add the calculation onto the end. I also would like to be able to input the cell destination daily probably with an input box so I can be flexible and potentially run it sevaral times if I need to catch up on previous days.
View 6 Replies
View Related
Aug 12, 2014
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
View 1 Replies
View Related
Jan 13, 2014
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab
001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
I think that I have explained what I need to do
View 8 Replies
View Related
Sep 8, 2007
Automatically copy formula to next cell when i enter something in perticular cell ....
View 11 Replies
View Related
Feb 20, 2014
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
View 4 Replies
View Related
Dec 15, 2011
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
View 6 Replies
View Related
Jul 18, 2012
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
View 9 Replies
View Related
