Copy Table Column To Another Table Column If Cells Are Identical
May 2, 2013
I have two Tables, Table1 and Table2, in a single Excel spreadsheet. Table1 is our master log, and Table2 contains only Provider Names, Contact Names, Phone Numbers, and Email Addresses. I need to compare column K from Table1 with column AT from Table2. Whenever Excel finds a perfect match, I need Excel to copy AW:AY to AB:AD. For each value in column AT, there will be several identical matches in column K.
I have tried to implement vlookup() and index(match()), but cannot figure either one of them.
Table1 is almost 1500 rows long, while Table2 is not quite 80.
View 3 Replies
ADVERTISEMENT
Apr 7, 2013
I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?
Example
Col A
Col B
Col C
SN0001
1/31/2013
1/15/2013
[Code]...
I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.
This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.
View 4 Replies
View Related
Jun 27, 2014
I'm trying to find the last column of my table that will change from week to week and copy the contents of that cell and the one beneath it and paste them into the two cells to the right of them.
Here's what I've tried:
Sheets("LY - TY Chart - Tot. Sell $").Select
Dim lastTableColLY As Long
Dim lastTableColTY As Long
Dim nextTableColLY As Long
Dim nextTableColTY As Long
lastTableColLY = Cells(109, Columns.Count).End(xlToLeft).Column
lastTableColTY = Cells(110, Columns.Count).End(xlToLeft).Column
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
Range.Cells(nextTableColLY).Select.Paste
I'm getting the following error:
Compile error: Argument not optional at the
Range.Cells(lastTableColLY, lastTableColTY).Select.Copy
View 2 Replies
View Related
Oct 31, 2013
I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.
View 2 Replies
View Related
Nov 24, 2011
Function in table.
I have a table:
A B C D
|Parent code|Child code|QTY|Unit|
|aaaaa | 1111| 1| PC|
| | 2222| 1| PC|
| | 3333| 1| PC|
| | 4444| 1| PC|
|bbbbb | 1111| 1| PC|
| | 2222| 1| PC|
| | 3333| 1| PC|
|ccccc | 1111| 1| PC|
| | 2222| 1| PC|
I need any function to "A" column to automatically fill in parent code to each child code (row) of the table.
View 2 Replies
View Related
Apr 6, 2008
i have three sheets in this workbook. i want to filter the the pupils with less than 20 marks in total at the end and copy it to the page named filter, from which i will go to the sheet1 which gives a remedial plan for ONLY those pupils who come in the filter page. this is all good but the problem is that when i update the Cont page, it wont update in the filter page.
View 6 Replies
View Related
Oct 5, 2011
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
View 2 Replies
View Related
Mar 13, 2013
Table 1
January-12
February-12
March-12
Table 2
Sr. No
Name
Dep
Lates
CL / SL
AL
Lates
CL / SL
AL
Lates
CL / SL
AL
[Code].....
View 1 Replies
View Related
Feb 25, 2014
When I add a table in Excel, I can choose from Table Styles, different styles that set one color for even rows and another color for odd rows.
Is there a way to say to this Table Style that assign one color for rows that have the same string in column A in consecutive rows and another color when the string in colum A changes?
I mean,
If A1= XYZ, A2=XYZ assign blue to row 1 and 2.
If A3:A9=FTG assign green to rows 3 to 9.
If A10:A13=LLKF assign blue again to rows 10 to 13.
If A14:A22=WUR882 assign green again to rows 14 to 22.
and so on.
View 2 Replies
View Related
Jul 15, 2014
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
View 3 Replies
View Related
Nov 5, 2008
I want to accomplish something like this but slightly different:
[url]
I have the same issue but a bit more complex. In my case I have an additional amount of columns (let's say dimensions). So for the example given (sales per month) I would add two columns for 4 different regions and 5 machine types (just examples).
The output (that would serve as pivot tabel input) would then have to be a 4 x 5 x 12 x 4 = 960 row database table.
I have tried to accomplish it by customizing the given code but that provedto be beyond my powers ;o)
and some 3rd party software [url]and [url] but non of them is doing what I'm looking for.
The code I'm looking for ideally would count the number of columns and unique records per column and construct the database table from that. So I am looking for flexibility in the number of dimensions also...
View 6 Replies
View Related
Jun 5, 2014
I'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
View 3 Replies
View Related
Mar 19, 2014
I have a list of parts in a table. I am manually copy/pasting this list to another sheet in my workbook and then using DATA→Remove Duplicates to get a shortened list. Is there a way to automate this process?
In the attached workbook I want the yellow cells to auto-fill for me.
I get a lot of lists in the format on the left hand side so I want excel to automatically format them for me so that I can use the output on the right.
List Sorting Help.xlsx
View 1 Replies
View Related
Aug 29, 2007
I currently have a table with a range of headings (row & column), and the necessary data for it. On a new worksheet, I have a table with only a few of the headings, and I was wondering if there was a macro that would automaticlly match the headings of the new sheet with the other table, and fill in the ncessary dat, as on the other sheet.
View 3 Replies
View Related
Mar 27, 2014
I want to copy a formula and want to lock a certain column, just like you use the dollar signs in normal formulas. Because the data in tables can't be locked with dollar signs.
Example:
example 1.xlsx
View 2 Replies
View Related
Feb 27, 2008
I'm looking the fill cells in column A to the bottom of my table, however, new information is added to the table on a regular basis and so designating the range as cell numbers won't work. Here's what I have so far: ...
View 9 Replies
View Related
May 12, 2008
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies
View Related
Mar 20, 2009
PART 1
- A record is created
- The record is modified once/several times
- Only the original record and the last modified record needs to be kept
PART 2
- The differences between the original and the last record need to be highlighted in the spreadsheet.
- This has to be repeated for a whole bunch of rows
Currently I am manually deleting the rows and eye-balling the changes. I'm using Excel 2002. I have ASAP Utitilities as well. Although macros are cool, I was hoping I could try with an Add-in or software.
View 9 Replies
View Related
Apr 25, 2014
I am having trouble getting some conditional formatting to apply to all cells in a column in a pivot table. Currently, the conditional formatting is only applying to the top level items in the pivot but is not applying to the lower level items. I can see why it is doing this. the range in "Applies to" is only specifying the rows that contain the top level items. I tried to change the range to D10:D647 but, it reverts back to just the top level items. How to get it to apply to everything?
Image attached : Capture.JPG
View 2 Replies
View Related
Jul 16, 2014
On a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
View 6 Replies
View Related
Mar 7, 2014
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
View 14 Replies
View Related
Dec 11, 2013
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
View 1 Replies
View Related
Jun 20, 2014
I am trying to figure how to show in one pivot table a current column and a proposed column. I have 15k rows of data. My data columns are employee, month, task, hours, proposed month. I can get a table that has months as columns and tasks as rows with sum of hours. What I would like to do is incorporate the proposed month, so that it shows hours in the months by current and proposed. That way my result would be January current, January proposed columns etc. I can change the propsed months by formulae so I want to play with the proposed task month the refresh the pivot table to see the results.
View 2 Replies
View Related
Aug 2, 2012
a macro to convert this;
a
b
c
d
[Code]...
Into this;
x
a
9
x
b
[Code]...
So far I have the following, but this is not quite right!
[QUOTE][Sub ConvertRange()
Dim targetRowNumber As Long
targetRowNumber = Selection.Rows(Selection.Rows.Count).Row + 2
Dim col1 As Variant
[Code]...
/QUOTE]#
View 7 Replies
View Related
Aug 24, 2008
I am trying to create a macro that converts a large list of Customer details from a vertical to horizontal format.
Each Customer has a unique sequential number running from 1 but the details are not always the same (e.g. in the below Phone does not always appear).
Current format is per the below:
Before
Column A Column B
Customer1
Address ABC
Phone 1234
Customer2
Amount 25
Address XYZ
Customer3
Amount 500
Address PQRS
Phone 567
Format afterwards should be
Customer AmountAddress 1Phone
1 ABC 1234
2 25 XYZ
3 500PQRS 567
View 4 Replies
View Related
Apr 4, 2014
I want to look up a value in the third column of a table and return the value in the first column of that row on the same table. What do I do?
View 2 Replies
View Related
Mar 10, 2014
Basically i have 2 tables like the ones below:
Name Rd1Rd2Rd3Rd4Rd5
Zac 8
James 6
John 8
Frank 4
Name Total
Zac
James
John
Frank
Now i want the total column in the second table to update and add the numbers as i update the rounds in the first one Which i can do through SUM or SUBTOTAL. However i want to sort the total column so the highest number is at the top and everytime i do it changes the name column not the total column.
View 7 Replies
View Related
Jun 11, 2014
I have several data sets that that have the same column headers (product portfolio data, split by categories into different workbooks) and the same structure and want to merge them to create summaries in a pivot table that I can slice the way I need to look at the data (e.g., by "Category 1" level, "Category 2" level, etc..). The messy way would be to just copy/paste all data in one master set and then create one pivot from it. The problem is that this a) takes a lot of time since I have several data sets and b) the content of these data sets is constantly changing, so I would need to constantly update the master data set by replacing updated sub sets.
I was hoping that I can use PowerPivot for that which is apparently not the case - as I understand PowerPivot is only being used to link data sets that contain a column with an identical key to then basically do on a larger scale what a vlookup would do. Is there a way to do this with PowerPivot?
View 1 Replies
View Related
Apr 4, 2014
I'm having difficulty trying to get the second file appended to the bottom of the 1st imported file. I get "run-time error '13' type mismatch". There is no difference between the two files. I'm thinking there is a problem with my range statement in the second file import, but this range works fine in other macros. Here's my code so far:
Range("A1").Select
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;\server1usersmydataIMPORT1.CSV", Destination _
:=Range("$A$1"))
.Name = "IMPORT1"
.FieldNames = True
.RowNumbers = False
[Code] .........
View 7 Replies
View Related
May 22, 2008
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies
View Related
