I have this code picked up from a friendly website:
Public Sub Extraction_to_new_sheets()
Dim My_Range As Range
Dim My_Cell As Variant
Dim sh_Original As Worksheet
Application.DisplayAlerts = False
Application.Calculation = xlCalculationManual
Application.ScreenUpdating = False
Set sh_Original = ActiveSheet
I have a worksheet that is composed a header row, and columns of data (client call results).
Each client is identified by a unique ID number in column A, a seperate column F has the 'call number, from 1 to x'.
So a client can have a single or multiple rows of data. Each client group of rows is sequenced with call 1 as line 1, call 2 at line 2, etc. etc. as your proceed down the rows.
The entire worksheet is already sorted (with a header row) ascending by client id and call #
What I want to accomplish is this
1 - copy the existing worksheet (CallRecords) to a new worksheet (CallToday)
2 - in the new worksheet, scan down (or up) from first data row (2) to the last row {ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row} and delete duplicate rows of the Client ID retaining the row with the max call number for that client id.
3 - sort the new worksheet (CallToday) ascending by column (G) date, and column (H) time.
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
The below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
copying all Rows(including blanks) between 2 identical rows
for example
ID
Notes
4554
asdf
--
asf
[code]....
Copy from 2nd row to 7th row (I.E 4554 - 4554) 4554 is on sheet 2 with other rep ID's - Loop with other ID's would be great
We are currently in the process of having a system makeover, with some documents written in Word, as the lines add up, if it fills the page and jumps onto a second (from a template) the document replicates the layout (almost like a master) and additional lines are added onto a second page.
We have moved some onto excel for formulas and general layouts which seem easier - but is there a way to do the above in Excel? for instance, if I have 50 rows on 1 page and need to include 75 for instance, I need to copy the entire layout and have page 2 show 51-75.
I have a command button that copies a template worksheet and names it with a date that the user chooses. Problem is, the user can choose the same date more than once. So, I need to have the command button check for all the sheet names, and if it finds a duplicate, prompt the user to enter some text to concatenate to the original sheet name, therefore making it's name unique. My existing code is as follows:
Private Sub CommandButton1_Click()
MsgBox "Please be patient. Creating a new Week Ending sheet can take several minutes!"
Call AddNewWE
End Sub
Sub AddNewWE()..............................
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies View RelatedI am using the following code to copy a unique list, but it gives a duplicate in the first 2 rows(col Q). There is no headings in the columns.
Code:
Sub CopyUnique()
Dim lastrow As Long
lastrow = ActiveSheet.Cells(Rows.Count, "P").End(xlUp).row
ActiveSheet.Range("P11:P" & lastrow).AdvancedFilter Action:=xlFilterCopy, _
CopyToRange:=ActiveSheet.Range("Q11"), Unique:=True
End Sub
The following code compare two sheets and remove the duplicate rows to a new sheet. In this code I have to create the third sheet manually.
I need the "New Sheet" to be create automatically with the name of "Dup".
Code:
Option Explicit
Sub nomatchnoty32()
Dim X, i As Long, j As Long, Y(), Dic As Object, k&, Z, name1$, name2$
Const shSource1 As String = "sheet1"
Const shSource2 As String = "Sheet2"
[Code] .........
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
Sample.xlsx
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies View RelatedI have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies View RelatedThe senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
Data Block example 1:
Data Block example 2:
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies View RelatedI have a Excel workbook that has 31 sheets. One column(H) of each Sheets will have cells that will contain the word "OPEN" or "CLOSED". When I execute a macro or VBA code I need to scan each row of that column of the current active sheet. If the word is "OPEN" I need to copy all of the data in that row to the next sheet. If the word is "CLOSED" nothing has to happen. Before the rows are inserted into the next sheet. I have to find the first empty row and start inserting at that point. The sheets are labeled 1-32 so if I am on sheet 10 and I find the word "OPEN" in column H, the current row needs to be copied to the next empty roe on sheet 11, etc.
View 5 Replies View RelatedI have a sheet with about 7 columns. If any text in column B contains the word "Product", I need to cut that row from sheet1 and paste it into the first open cell in column A on sheet 2. it then needs to loop through each column to do so.
This is what I have so far
Code:
Sub Moverows()
Dim lastrow As Long
Dim row_index As Long
Application.ScreenUpdating = False
lastrow = ActiveSheet.Cells(Rows.Count, "B").End(xlUp).Row
For row_index = lastrow - 1 To 1 Step -1
[code]....
IT seems to be failing at the underlined section.
I have 3 rows in sheet1, say rows 1-3. In sheet 2, I want to be able to copy the 3 rows in sheet1 and past it right before a row that contains the unique value "XYXYXY". I will attach this macro to a button.
The value 'XYXYXY' is truly unique and could be located in any row in sheet 2.
I also want to be able to do the reverse, that is delete the top 3 rows above the unique values 'XYXYXY'. I also attach this macro to a button.
I have a sheet(sheet1) that has a couple thousand rows of data. Column C starting at Row 4 has customer names. What I want to do is to have a macro to run looking at range A4:H5000, and make a new sheet for each different customer and copy the data in each row on to that customers sheets.
View 9 Replies View RelatedWe have a daily report that looks like the table below (this is just part of a huge report):
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
[Code]...
I want to extract the following names below from the raw data to be sent to the team. Basically, I paste the raw data on Sheet1, and would like a formula or macro to extract these names directly to Sheet2 so I don't need to copy each row (the list actually grows every couple of weeks).
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
[Code]...
I have two work sheets in excel, and I would like to compare the rows. Sheet1 will be the original data, and if sheet2 has a different number in column L the data needs to be copied over to a new sheet. In addition, I need the number in column L sheet1 copied over and subtract the two numbers. The following columns need to compared G,I, J and L. when sheet2 has a new row, copy the new over. the rows can be in the 100s. Here is an example on shee1, sheet2 and out com on sheet3
View 4 Replies View RelatedI need some VBA help in copying ranges from one sheet to another and pasting them on a predifined order. I have one worksheet that contains a large number of ranges with data on alphabetical order. Each entry on this sheet contains several rows of data and is identified by a name (e.g. entry "David" = rows 6:11, "Mark" = rows 13:18 and "Rose" = rows 20:25). I need to select certain ranges from this sheet and copy them on a predefined order on a different sheet (e.g 1) Rose, 2) David 3) Mark. The sequence is neither set by date, alphabetical order, nor by value. I have the order already predifined. I guess I could do this by specifiying the source sheet ranges and the destination ranges as well, but as I have over 2000 entries (each consisting of six rows), I need an efficient way to do it. Any help you could provide would be greatly appreciated.
View 9 Replies View RelatedI have a spreadsheet worksheet 1 "BOM" and created worksheet 2 "Risk List"
I have multi Rows of highlighed (ColorIndex = 44) and I would like to have a marcro that copys the highlighted rows from worksheet "BOM" to Worksheet "Risk List" starting the entery at row A3 on "Risk List" as row A1-A2 are Header.
