Macro For Copying Multiple Rows
Feb 11, 2010I'm trying to copy multiple rows with a macro. Below code lets me duplicate one row at the time and the duplicate is inserted just below the chosen row.
View 2 Replies
ADVERTISEMENT
Copying Cell Contents From One Column To Multiple Rows
Mar 20, 2014I'm sure there is an easier way than copying and pasting each individual cell from one spreadsheet to another. Is there a way I can define a batch of cells (city, state, phone #) and copy them into the other spreadsheet so I don't have to do each cell individually?
Here is a picture to show what exactly I am trying to do.
SS.PNG
Also, the cells that belong in the same column and row on one spreadsheet are equal distance from each other throughout the other spreadsheet that has all the info in 1 column.
Copying Rows With Multiple Colum Values To New Sheet
May 21, 2008I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
Copying Rows From Multiple Books To One Book Based On Condition?
Jul 27, 2012I have eight sheets that have lists of questions in, which I want to copy across to a results sheet if the answer to a question is 'Yes'. Each question takes up rows B:H inclusive, and I would want to copy them to rows B:H in the results sheet. The "Yes" value will be found in column F of each row.
How can I set up a macro to copy the entire rows (without formatting) into a results sheet properly? I've tried every solution I can find but always hit a roadblock somewhere.
Ideally I would like to have a 'populate' button on the results sheet that would find every question that was answered 'yes' across the eight survey sheets and import them into results sheet.
Macro For Copying Certain Rows To Another Sheet.
Oct 20, 2009I'm trying to create a macro that examines a sheet of data, and if the data in a certain column (column P) contains either A,B, or C then it would copy the entire row over to another sheet. If it contained a blank or D,E, F, etc,etc then it would just ignore that and move to the next row.
I have no idea where to start, i've searched google and here on Mr.Excel.
Macro For Copying Formulas + Inserting Rows
Apr 25, 2009I was tired of making my list smaller to upload it here, so I uploaded the complete thing on megaupload :P Here is the link:
http://www.megaupload.com/?d=1W6PBADE
On the bottom of the list is a button; "Add New Anime". When you click on that you get a UserForm where you can enter; Title, Type, Total Episodes, D/L Eps and Watched Episodes. When you press ''Add Anime" the entered values are entered at the bottom of the list, underneath the corresponding list names on the top.
Now there are 4 list names left (Left, Status, Status 2, and Progress (%)) I still have to make a option to enter Status 2 as well in the UserForm.
Now the question:
In columns F (Left), H (Status) and I (Progress (%)) are formulas. How can I copy those formulas automatically when I add something new with the UserForm? And can it automatically insert a new row, since I have to move the buttons down with every new title.
Macro For Copying Cells To Columns And Rows
Sep 22, 2012Why does my macro mess up on second line C23 and not places Play Equipment or the amount in the right column it stays on row C22
[URL]....
Code:
Private Sub CommandButton1_Click()
Dim SheetName As String
SheetName = "Estimate1"
SheetName = InputBox("enter the name of a sheet to use", "sheet name", SheetName)
[Code]....
Creating Multiple Workbooks Without Copying The Macro
Dec 14, 2007For work I have to create copies of the same workbook for every day of the month. I have got the following to do it properly, which may not be the best way so I am open to suggestions, but I don't want it to save this macro in every workbook. There are however other macros that I do want it to take with it, just not this one.
Sub SaveByDate()
Dim a As Integer, b As Integer, c As Integer
' number of days in month + 1 (this is just a test; for Jan a = 32)
a = 6
' start date
b = 1
c = 0
For c = 1 To a
If c < a Then
MyMonth = "Jan"
MyDay = b
MyFileName = MyMonth & " " & MyDay & " 2008 daily report"
ActiveWorkbook.SaveAs Filename:=MyFileName
b = c + 1
End If
Next c
End Sub
Excel 2007 :: Macro - Copying Column In Which Number Of Rows Can Vary
Sep 23, 2013I am using MS Excel 2007 and I am trying to create a macro which will copy column E and paste the data in column E to the bottom of column D. However each week the amount of rows in these column with vary, they will always be the same amount of rows in column E as in column D but there may be 20 rows one week and a 100 rows the next.
The formula I currently have is below but this will only work for a specified number of rows. How I could change this to work for any number of rows?
Code:
Sub IPT()
'
' IPT Macro
'
'
Range("E1").Select
[Code] .....
Macro To Delete If Set Of Multiple Rows Equals Another Set Of Rows
May 10, 2012I need a macro that can look at multiple (say three) rows and delete those rows if they match another three rows in the worksheet.
For example:
1 0
3 1
5 7
4 4
6 5
8 3
1 8
5 2
3 9
6 5
8 3
1 8
7 5
If three rows are the same, then one set is deleted (it can be either bottom or top set). I would like to do this for rows 1-500 in the worksheet.
Macro For Copying Rows Of Data In Sheet 1 To Sheet 2
Oct 8, 2009I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
Macro - Inserting Multiple Rows
Feb 23, 2009see the attachment. You will see that I have recorded two macros:
1) To insert a new row for new people.
2) To insert a row for new animals.
With regards to 1), I would like to create a macro that copies the contents of the row with the penultimate name in the people section, and for a new row to be inserted beneath the copied cell. Similarly, with regards to 2) I would like to create a macro that copies the contents of the row with the penultimate name in the animal section, and for a new row to be inserted beneath the copied cell.
The issue that I have is that the macros do not copy the penultimate cell in each section, but copy a particular row, say row 11 each time I want to insert a new animal. So if I had inserted numerous new rows for the people section, and subsequently wanted to insert a new row for the animal section, I press “crtl+sht+a” which copies the contents of row 11 and which is not the contents of the penultimate row for the animal section.
Adding Multiple Rows With A Macro
Feb 23, 2010I´ve made a simple macro in order to make easier to add new rows in a table, by filling the cells with the new data.
The problem is that according to one of the fields, I´d like that macro to add multiple rows, with exactly the same information but numbering all these rows on this specific field from 1to the number I filled on the respective cell.
For example, I have beyond another fields that I´ve already filled, the field "Parcel" and "Total of Parcels". I filled parcel with number 1 and total of parcels with 5. Then I´d like the macro to add 5 rows with the "total of parcels" cells containing 5 on every row and the field parcel filled with number 1, 2, 3, 4 and 5, for each row created.
Macro For Merging Multiple Rows To One Row
Aug 19, 2013number
string
string
string
date
string
string
date
string
string
string
string
string
string
Inserting New Rows / Copying From Additional Rows
May 25, 2013I'm not great anyways with VBA Macro.Effectively, here is my issue. I have a spreadsheet which is really badly designed.In one column I have multiple numbers separated by a comma. I need this data separated into new individual rows, but at the same time, copying the data in the other columns in that row to the new row.
Example of what I have:
Test 1 54 email1
Test 2 32, 343, 63, 34 email2
Test 3 4934, 5342 email 3
What I need:
Test 1 54 email1
Test 2 32 email2
Test 2 343 email2
Test 2 63 email2
Test 2 34 email2
Test 3 4934 email3
Test 3 5342 email3
I have have the following code below which paste everything into a new column and into a new row, but the problem I have is that it does not push the other rows data down, nor does it copy the 1st rows data (for that data set) into the new rows created.
Code:
Option Explicit
Sub Macro1()
Dim fromCol As String
Dim toCol As String
Dim fromRow As String
Dim toRow As String
Dim inVal As String
Dim outVal As String
[Code] ........
The amount of rows I have, so this manually (text to column, then transcoding etc) it out of the questions (i have 1000 rows of this!)
Macro To Delete Rows Containing Multiple Criteria?
Feb 23, 2011how they can be used to delete rows that meet multiple criteria, however all the examples I have found seem to be rather complex and personal to the individuals as opposed to being rather generic. Many people, including myself would find it useful to have a simplified generic answer that can be applied to all kinds of criteria. Such as if the data in column B = x and the data in column C = y delete the row. Here is my example.
SCENARIO EXAMPLE:
In column A - Date e.g. 05/02/2011, 06/02/2011
In column B - Day
In column C - Time (in format 09:06:21)
In column D – Service numbers dialled (70, 110, 224) two to three digits long
MACRO EXAMPLE:
Delete the row if the criteria in:
Column D = 10, 40, 192 or 244
And
Column C is between 09:00:00 and 16:00:00
macro code or at least a link to a thread that they think gives a scenario as simple as this.
Macro To Edit Multiple Rows Of Text
Oct 22, 2007I used the macro editor to create a "simple" macro to edit 7 rows of text. The steps were basic and simple - F2 key, backspace about 25 times, and down arrow then repeat these 3 steps 6 more times. The macro I got gave me the result of the very first cell as I was recording the macro. I think I remember the old Lotus 1-2-3 macro text - {edit}{backspace}{down}. Wish it were still that simple.
View 5 Replies View RelatedMacro Sort Rows In Multiple Sheets
Jan 31, 2014Sorting.xlsx
I am trying to figure out how to make a macro that can sort some numbers from Largest to Smallest within a specific range on multiple sheets. The range is only within column D starting with cell D11: (until the data ends) on all the sheets in my workbook (the number of sheets may change with time) except for Sheets: "A", "B" and "C".
In other words I want the sort to work on all sheets except the first 3 sheets which are named Sheet A, Sheet B, and Sheet C.
I have attached a spreadsheet for an example of what I am saying.
Macro To Find A Number In Multiple Rows
Oct 10, 2009Sheet A – is of the following format
SlNO, Item_Description, …,…
The item_description is a combination of XXX, Part_no and Part_description all clubbed randomly. ( So I cannot use text-to-columns to bifurcate them).
Now Sheet B contains the part_number as follows :
SlNos, Part_no, ….,….,
I need a macro ( a procedure / function ) in Excel-vba, which would select each part_no in sheet – B one by one, find all those rows in which it appears in Item_Description column of Sheet-A and add a comment in the next column to it.
The Vlookup function cannot be used as it is not an exact match as the part_no is embedded among other things in item_description.
Macro To Insert Rows In Multiple Tabs
Feb 19, 2010I'm trying to figure out how to create a macro for a project at work. Basically, think of a spreadsheet with 5 tabs, but the information in Tab 1-Column D is the same in Tab-4 Column D and Tab-5 Column D. When I insert a row, though, I have to go to each tab, insert the row, and copy down the formulas from the row above to ensure the flow-through stays true. This can get very tedious.
Does anyone have a template or tips on a macro that would, in essence, work like this:
a) Highlight the row above which a row should be inserted
b) Trigger the macro
c) A row is inserted above the highlighted row in Tabs #1, #4 and #5
d) The information from the row above the inserted row is copied down to the new row in each of the three tabs.
Moving Rows Into Multiple Spreadsheet Using Macro
Jan 20, 2008Is it possible to move rows of data in a spreadsheet to multiple spreadsheet accordingly?
I had lists of tasks in a single spreadsheet and i need to segregate the tasks for all my staff in serial while no duplication among all of them. For instance, i got 4 personals in my department and i need the 1st 4 tasks to be distribute to each of them and next 4 tasks accordingly. This is due to all tasks are equip with due date and i need to calculate how much time i need to accomplishing them. i'm used to manually move it and found it time consuming, so i was wondering if someone would instruct me where or how to achieve it by using a simple macro.
Macro To Sort Multiple Rows Of Data
Sep 16, 2008I have a report that I drop down into Excel that is a transaction report for securities. The data for each security is in two rows. I would like to write a macro that would sort each two-line group by a certain cell in the group. If I could make the macro request the number of rows and columns in each range and the cell address of the cell to sort by, I would be able to use this macro for many different reports. Also, there has to be some way of telling the macro where to begin and where to end. I have some experience with macros although generally I "Frankenstein".
Goal Seek Macro For Multiple Rows
Jan 27, 2008I am trying to get Goal Seek to seek a value on each row as such:
Project 1 : Value 1 : Goal Seek using Value 1
Project 2 : Value 2 : Goal Seek using Value 2
etc....
How do I create one macro that will pick up Value 1, 2 etc and then set the Goal Seek to that value automatically, since Value 1, 2, etc will already be available in a cell? Alternativley there could be a macro that just runs that a Goal Seek for all the rows at once?
Copying Multiple Columns From Multiple Worksheets To Summary Worksheet
Jul 28, 2013I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
Macro To Delete Rows Based On Multiple Criteria?
Jul 10, 2014A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
Macro Button To Add / Delete Rows Across Multiple Sheets
Jul 24, 2014I've been piecing a macro together from different sites and have run into a couple issues I can't find resolutions to. I have a excel doc for tracking paint emissions per week. I would like to have a button on my master tab that will add a row and fill the formatting from the line above across all 60 some sheets. Ideally I would like the same button to first prompt if you want to add or delete rows. When adding rows I would like it to add it above the button (there's 3 buttons and for 3 different sections) and if deleting ask which row to delete. If it can't be done in one button that's fine, I can live with that. The big thing I need is for it to replicate across all of the excel sheets. I've attached a copy of the document
View 1 Replies View RelatedMacro To Select 2 Rows From One Workbook To Another With Multiple Tabs On Each
Feb 21, 2014I have 2 workbooks. The workbooks have 36 tabs for each department. Workbook 1 are current charges for the departments and workbook 2 is the revenue for each department. I would like to take the top 2 rows from workbook 2 and add them to workbook 1 at the bottom of each tab. I was able to get it to work to a specific row but the workbook 1 has variable rows for each tab.
View 3 Replies View RelatedMacro To Search Multiple Values And Delete Rows.
Nov 5, 2008How to create a macro to search a value and delete the row but I'm having trouble trying to get this to search multiple values. Keep in mind I'm really new at attempting to create a macro so this may look terrible ;-)
I have a list of 20 numbers (changes from time to time) and I need to filter any row containing any one of these numbers out of my results each day. I am currently able to filter a single group of numbers but get an end error every time I attempt to string a group of numbers.
This is what I have so far and is an example. We'll use three numbers as an example.
"12345","12346","12347" are the numbers that we'll use for the example that I need to filter. The code that I have is:
Macro For Saving Multiple Rows Of Data To New Sheet
Apr 14, 2009I am looking to save a range of data from an input sheet, to a data sheet.
I know how to save indivdual cells to a worksheet in the form of a data
what i am looking to do is save A6 - J6 down A19 - J19, but only saving the data which is entered
A6 - J6
A7 - J7
Using Macro To Put Rows In Multiple Sheets In Ascending Order
Jul 22, 2012I am looking to create a sheet that automatically updates itself in alphabetical order, when we enter any data.
here is the case:
- I've 30 secondary sheets and 1 master sheet
-----------------------------------------------------sheets detail-----------------------------------------------
Master Sheet detail:
master sheet's column A contains name from A3 to A100 (user can edit this column)Column B to to AM contains data corresponding to each name in column A
Secondary sheets detail:
column A contains name from A3 to A100 which are linked to master's column A (means any change in Master sheets' column A will change this column).................. (user cannot edit this column)column B to I contains corresponding data.
------------------------------------------------------------------------------------------------------------------
I want that when user enters a new Name in master sheet and presses "Enter" then:-
Column A of master sheet should automatically arrange itself in ascending order, along with all the corresponding data in column B to AMsince secondary sheet's column A is also linked with master sheet, so they should also be updated along with their data in corresponding columns i.e B to I
I've tried other websites and solutions for sorting of rows but since i've little experience with excel VBA, things are not quite working for me.