Count If / Compare 2 Ranges And Count Where Cells In Same Row Differ
Apr 15, 2014
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
I have some code which copies down a formula in a range of data. After this I want it to sort the data by this column in question. However my data range will differ in rows all the time and if I record the sort through the macro method it saves the VB code as a fixed range i.e:
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range("A2:A1967" _ ), SortOn:=xlSortOnValues, Order:=xlDescending, DataOption:=xlSortNormal The formula code beforehand does acquire the last row number if that's of any help:
Dim rng As Range Set rng = Range(Cells(ActiveCell.Row, 1), [A50000].End(xlUp)).Offset(0, 1) rng.FormulaR1C1 = "=IF(RIGHT(RC[-1],2)=""XP"",""5"","""")"
I want to work out how many cells in a colums are "equal to or more than AND less than or equal to" certain date ranges.
E.G. Column A has random dates from 01/10/2012 to 31/12/2012. I want to know how many of these cells have dates that meet the criteria of >=01/12/2012 and <=31/12/2012.
I have searched on here and found COUNTIF which didn't work. I also tried DCOUNT which I couldn't get to work.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
I'm a newbie to these forums, but I had a question that I couldn't find an answer to in the search feature. So, I joined and here I go....
I have a whole lotta data (nearly 600 "pages" of data) that I pasted into Excel. Unfortunately, it's formatted poorly and I'd like to make it nice and purty.
What I started to do was to create a 2nd sheet and then do an "=" and then click the spot with the 'group name' and then another "=" underneath it and then clicked the spot with the 'premium' info, etc.
After a couple of these, I figured that I could simply make a formula to help me out with it. Please see the attached screen captures for some detail on my issue.
Can someone help me create a formula or a way to count a certain cell and then 52 cells underneath it and display it?
Part #1/1/20091/5/20091/6/20091/7/20091/26/20091/27/20091/28/20091/29/20091/30/20092/2/20092/3/20092/4/20092/5/20092/6/20092/9/20092/10/20092/11/20092/12/20092/13/2009ABC --20372027-00013211321-1304-001232122500
I have some data on rows that are similar to what is above. Hyphens mean no activity, then there are "stock" amounts and then "0" means out of stock. I'd like to count the # of times that the stock changes to 0, by ranges...so 1/27/09 - 1/29/09 would be counted once -- as a range...the answer here would be 3 times that stock went to 0 - hyphens ignored..
I'm sure if's some count if function, or multiple ones, but not sure.
I am trying to figure out how to sum/count between ranges. The attached file has the data. Basically I have the list of salespeople, Various ID's, Units, and sales. I want to count/sum by salesperson between 2 numbers. In the example below, I'd want to know Jones sales between ID's 1 and 3. The attached file.....
Need a formula that will count the number of occurrences of that same number in three different ranges. The number that is to be compared to is in a cell that is a result of a formula.
Example: Lowest number found in three ranges: 30 (Answer is in A1) Question: how many times does that number appear in the three ranges?
Syntax: =Countif(Range1,range2,range3=A1) Has to equal the cell reference value (A1), not a plain number (like 30)
I want to count the number of cells with a “#n/a” in for a cell range which is non-continuous. For example my cell range is: “H5,J5,L5,N5,P5,R5,T5,V5". I’ve tried a few different things but I can’t get the function to work.
I have many columns of data, each containing numbers ranging from zero to 100. I am trying to determine the formula to count how many of these numbers fall into different defined ranges;
e.g. how many pieces of the data are numbers between 90-99, how many are numbers from 80-89, 70-79, 60-69, etc continuing on down.
I attached a sample workbook which may be clearer: there is a tab (titled "data") with 3 example columns of data & there is a tab (titled "counts") where I hope to get counts for each range to be generated by a formula rather than count them myself.
Not sure if the following is possible, but this would be even faster if each column didn't have to first be sorted ascending/descending for the formula to be effective (as I have hundreds of these columns).
I need a formula to look in column B and find all "jun" (or anything else that I put in there) THEN look in column J and find only all "d" (d is one of 3 choices there) that correspond to the "jun" then give me the count of the "d".
This is an example. With the formula I can do a variety of things to get info that I'd like to have.
I'm working with a large amount of data comparing the proximity of bank branches. I want to find out how many branches two banks have within the same zip code.
I have two columns, , A and B each with a list of 3000+zip codes.
What I want to do is count how many of the cells in Column A are Equal to Column B.
For example if I have the following two columns: 1 1 1 1 1 0 3 3 4 3 5 7 6 8
I would want to return the number 3 because Column A is equal to Column B 3 times(two times with 1, and 1 time with 3).
I want to count the number of data rows in Sheet 1, Count the number of data rows in Sheet 2 and display a message if they are not equal. I have tried various IF(COUNTA statements but cannot get the correct syntax. MACKE
I am struggling to come up with a formula that will look at one column of data to check for a condition (for example, it says 7. Implement) and then look at another column to see if a second condition is met (this one is a date ie Feb-14) and count those that meet both. The data I wish to check is on a different worksheet if that makes a difference...
I am attempting to count records based on 3 criteria in 3 different ranges and am hitting a wall. My formula will be on a different worksheet as it is the summary sheet.
Worksheet "Cases" Column E - Type Column F - Month Column G - Year
Worksheet "Recap" Recap month will be input into Cell I5 eg. "6" for June Recap year will be input into Cell K5 eg. "2009" Cells N10-N15 is a list of Types
Summary Cell J10 will need to count if 1)worksheet Cases column E = worksheet Recap N10 2)worksheet Cases column F = worksheet Recap I5 3)worksheet Cases column G = worksheet Recap K5
The formula below contains an error (one of many as I've been trying to resove this). = COUNTA(IF(CZ4:DE4,DI4:DN4,DR4:DW4,EA4:EF4,EJ4:EO4>"1",Games / Activity,Games)) The formula should return the following result:
If two or more cells in the above ranges contain numbers and cell C4 isn't empty then return the words "Games / Activity", otherwise return "Games". If C4 is empty keep blank. Can this be done with a standard formula?
I am trying to count the number of instances of dates that occur in a single column. For example, I want to be able to count the total # of dates that occur between Jun and July, then a different count of dates occurring between Aug and Dec (see example below). I have tried this formula: =SUMPRODUCT((E11:E149>=1/8/2008)*(E11:E149<=12/31/2009)) but it comes back with zero.
Column A --------- 1/8/2008 5/8/2008 8/18/2008 9/18/2008
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that
Dim i As Long, j As Long j = 1 For i = 1 To UsedRange.Rows.Count Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value j = j + 1 Next i End Sub
I have a problem finding the correct formula for counting matches with conditions between 2 non-equal ranges in Excel. The sheet is a try at making a working schedule template a bit automated.
For Week 1 each cell in the H16:H25 has a drop-down list (originating from BD30:BD50) where a work position can be chosen. The fixed list in BD30:BD50 starts with “<<SELECT>>” which is the default choice for the cells in H16:H25, and then “HOLD” before continuing with various work position names. K16:K25 is shift number 1 on Monday, L16:25 is shift 2 on Monday, and so on until Shift number 6. Then the rest of the days of the week follow (each with 6 shifts). Monday through Sunday (with 6 shifts for each) ranges over K16:AZ25. In the cells in K16:AZ25 the following can be entered: “x” (work), “o”(off), “-“ (leave).
The issue is the formula in each of the K26:AZ26 cells which are to total each of the shift columns . I want to count all the “x” in each column, but ONLY if the positions chosen in H16:H25 matches one of the positions in the list in BD30:BD50. NOT if a cell in H16:H25 displays “<<SELECT>>” or “HOLD” (even if it has a “x” entered in one of the Shift cells).
I'm scrambling my head to put this together. Could somebody show me how this is done? I have two rows of data that contains dates in the mmm-yy format. The first row is the start date of the activity and the second row is the end date of the activity. Thus, in each column i would have an activity with its start and end dates. If i want to total the number of months taking into consideration only unique months (counting over-lapping months just once), how do i do that? These dates could have breaks in between, too. Like if an activity ended Jul-08, the next could begin Dec-08. I am able to count the months using the datedif function, is there a match or other function that i need to use?
Creating a Macro which compare the Customer ID's present in Column H of Sample1 file with Column B of both Sample1 and Sample2 files.
The Count of Sample1 file should come in Column I and the count of Sample2 file should come in Column J of Sample1 file.
After above steps macro should automatically pick the lowest value (value should be greater than 0, if value is 0 than macro should consider it as blank) from Column I and J and paste it to Column K.
In Sample1 file I had also shown that how the data should look after running the Macro.