# Count Values Greater Than Or Equal To Zero

Dec 2, 2009How can I count the number of cells in a range that contain values that are greater than or equal to zero?

View 2 RepliesHow can I count the number of cells in a range that contain values that are greater than or equal to zero?

View 2 RepliesADVERTISEMENT

I'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:

Code:

=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=

I want to look to a range and if there is a value greater than zero I want to count it. I keep going round in circles trying to do this and now I give up.

View 4 Replies View RelatedI have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?

View 2 Replies View RelatedHow can I use COUNTIF to count the values in a range which are greater than 0?

I put =COUNTIF(B2:B100000)>0 but that didn't work?

(I'm using XL 2007 hence the range greater than 65000 rows. But I don't

think COUNTIFs syntax has been changed in 2007 so I assume I'm having a brain

fart.)

I have a yearly running log (attached). At the bottom in cell [B88] I would like to develop a formula that gives me the number of times I ran in that specific month. Dates are in Column A and running distances are in Column B. If a distance is zero, I don't want to count it. I have attempted to solve this using the =COUNTIFS formula, but I am not able to structure it properly. Maybe =COUNTIFS is not what I should be using.

View 3 Replies View Related=SUBTOTAL(2,A2:A100) can be used in combination with any other formula so that when the data is filtered using autofilter it will only count values greater than zero.

I have attached a worksheet with the example.

In the attached workbook subtotal formulas are used in Row1 for sum and row 2 for count.

When the data is filtered using code "DUP" in column D, the subtotal in cell C2 is "4", whereas in the specified range there is a positive value in only 1 cell that is $1050 in cell C99.

Is there some combination that can be used with SUBTOTAL formula so that it will only count values greater than zero when data is filtered.

I am trying to count the number of rows that have values greater than 10/01/2008 in either of two fields. I tried following formula but instead of giving total number of rows, it returns a random date.

View 2 Replies View RelatedI have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.

View 3 Replies View RelatedIf A7 is equal to and greater than 95% than B7 is equal to "A". If A7 is equal to 91% but less than 94.99% than B7 is equal to "B"...

View 4 Replies View RelatedI am looking for a function like MATCH if the match type were set to -1. However my data is sorted in ascending order. I am mining data from a Pivot Table, and it has dates across the top. Of course the pivot table will have the data sorted in ascending order from left to right. I want to find the first date that is greater than today. With weekends and holidays I can't just use TODAY()+1. Is there a function that can do what I am asking? Also I do not want to change the pivot table itself.

View 9 Replies View RelatedI need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.

I think it would be something like:

SUMIf(H40>"32",

I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...

View 9 Replies View Relatedi'm trying to create a markscheme progress sheet.

You take a childs actual age in months and years (ie 9.8 for 9years and 8months). They then, in theory, should be at that age level for reading and spelling.

I have the age in B4, the reading in C4 and the spelling in D4. If i use CF to say i want C4 to be red if it's less than B4, Amber if it's the same and green if it's over, as soon as i okay it, C4 goes amber, because it's equal to B4, which is blank. I can get the colours to work, i just can't figure out what to put to turn the amber off when cell B4 is empty.

I've tried as many combinations as my little amount of excel knowledge can cope with.

I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.

View 9 Replies View Relatedi have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?

View 4 Replies View RelatedStarting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.

View 4 Replies View RelatedNeed a formula for counting how many consecutive cells where the value is gretaer than or equal to +1

For example 1,

J18 = 7

K18 = 9

L18 = 3

M18 = 2

N18 = 8

O18 = 1

P18 = 8

Q18 = -17

In the above example the result would be 7

Example 2:

J12 = -22

K12 = 9

L12 = 4

In the above example the result would be 0 since the 1st value was -22

I am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?

View 9 Replies View RelatedI am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?

View 3 Replies View RelatedI want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.

I would like some code in VBA

In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.

View 3 Replies View RelatedI have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.

View 2 Replies View RelatedI'd like all Cells in column AC (e.g. AC$3$:AC$517$) to be filled with yellow fill if the cell value is any date greater than or equal to today. Any past dates can be left blank (for now)

=$AC3>=TODAY()

SUMIFS with less than & more than

I found this thread which works for normal ranges

I want to Sum for Values Greater than a specific date in my formula.

This first one works for a specific date (Relevant reference in red), so say 01/01/2014

Code:

=SUMIFS(Table2[[#All],[Basic]],

Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],

Table2[[#All],[Start Date]],Table3[#Headers],

Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])

Code:

To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.

=SUMIFS(Table2[[#All],[Basic]],

Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],

">="Table2[[#All],[Start Date]],Table3[#Headers],

Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])

I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.

Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.

Examples of the contents of cells in col D with the "Category:" prefix are as follows:

Category: Adversity

Category: Answers

Category: Assurance

Category: Blessings

Category: Build

Category: Change

Category: Children

Category: Choices

Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.

I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.

I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.

View 2 Replies View RelatedFor column "B" count all the 1's if column header is equal to name in column A.

For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.

How to correct my formula because it does not work?

Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")

I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.

I want to do is count in a column numbers greater than 13 but less than 20.

I am also trying to write another formula that counts numbers equal to or higher than 1 but less than 12. In other words,

I do not want this count to include any cells that contain 0.

Copyrights 2005-15 www.BigResource.com, All rights reserved