Count Visible AutoFilter Records
Aug 24, 2006
I have records entered in sheet 1 named "Data". The "Data " Sheet contains Model wise records with serial nos and having status as either ZERO or ONE. Zero indicated that the particular model is out of stock while One indicates it is in stock.
When I filter the data using Auto Filter for records having Status 1, a list of records are displayed. I want to create a summary report in sheet 2 wherein it displays the no of occurence of a particular Model.
What I have observed is that whenever I filter for Status 1 & within it for Model A, it displays "3 of 12 records found" in the status bar. Is it possible to capture that "3" from that message displayed. Or is there any way to count the occurence ?
View 7 Replies
ADVERTISEMENT
May 16, 2008
Is there a simple way to count unhidden rows? I saw Counting number of unhidden rows =SUBTOTAL(103,D11:D7180) and, frankly, I'm wondering if there is a way to do it without a formula. I don't need the count in a cell, per se, just a quick count of the unhidden rows of a worksheet for usage elsewhere.
View 5 Replies
View Related
Mar 19, 2012
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
View 1 Replies
View Related
Jun 2, 2009
I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies
View Related
Feb 13, 2008
I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies
View Related
Aug 5, 2013
I am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
View 3 Replies
View Related
May 28, 2014
I'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test()
max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row
For datarow = 3 To max_x
If Worksheets("Data").Cells(datarow, 4) = "Wire" Then
Worksheets("Data").AutoFilterMode = False
[Code]....
View 3 Replies
View Related
Aug 5, 2014
I have a Userform that it makes possible to step through the the spreadsheet. It works with Previous and Next buttons. The Userform opens with a doubleclick. This works fine, but when I use an autofilter and the criteria reduces the number of rows, the Userform shows the hidden rows as well as the filtered rows. How could it be made that it only steps through the visible rows?
View 2 Replies
View Related
Jul 11, 2007
I have a Userform that allows you to step through the the spread sheet that works with Previous and Next buttons. This works fine.
When I use an autofilter where the criteria reduces the number of rows the Userform shows the hidden rows as well as the filtered rows. how can I make it just show the visible rows.
View 14 Replies
View Related
Jan 20, 2014
I have a spreadsheet with over 20000 rows of data and have used autofilter to find the information I want to check. Once I have these rows I want to check whether the cells in Column AE are higher/lower than the number (in this case '3'). Once it finds a cell that meets this condition then it copies and pastes the whole row so that I can review the entry.
The problem I'm having is that it doesn't work all the time. I've tested it a number of times in break mode & played it throughout and it works as expected, whereas other times it picks up the top row (header) and duplicates it or it picks up hidden rows and pastes them in sheet 2 if the condition is met. I want it to just pick up rows if they are visible (using the filter) if the condition is met.
Here's what I have so far:
Code:
Sub Lvl3v2()
'Level 3
Dim i As Integer
Dim r As Range
Dim c As Range
i = Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
[Code] .........
View 2 Replies
View Related
Jul 12, 2006
how to scroll through visible cells after I have autofiltered a list, the same way you do when you use the arrows on your keyboard. When I try the offset method, Excel selects the following row, regardless its visibility.
View 4 Replies
View Related
Nov 29, 2006
WHEN I FILTER FOR WORDS BEGGINING WITH LETTER I. THERE IS NO DATA...SO I HAVE SOME CODE THAT WILL POP UP MSG BOX. AND IF THERE IS THEN COPY DESIGANTED RANGE..HOWEVEER WHEN I FILTER USING THE BELOW CODE...IT DOES NOT RECOGNIZE THAT THERE IS NOTHING AND JUST GOES THROUGH AS NORMAL..
Sub START()
Dim rng As Range
Dim rng2 As Range
Dim worksheet1 As Worksheet
Set worksheet1 = worksheets("MAIN")
Selection.AutoFilter Field:=4, Criteria1:="=I*", Operator:=xlAnd
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(0, 18).Resize(.Rows.Count - 1, 1)
.SpecialCells (xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else
worksheets("noms").Cells.Clear
Set rng = ActiveSheet.AutoFilter.Range
rng.Offset(1, 0).Resize(rng.Rows.Count - 1).Copy _
destination:=worksheets("NOMS").Range("A1")
End Sub
View 8 Replies
View Related
Jan 14, 2008
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
View 3 Replies
View Related
Jul 30, 2008
I'm working on a VB code where I use an autofilter. I want to clear a selection in a couple of columns, where the value in the autofilter = 1.
This is the
Dim lRow1 As Long
lRow1 = WorksheetFunction.Max( Range("A65536").End(xlUp).Row)
Rows("1:1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="1"
Range("F2:H" & lRow1,"J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
Sometimes there is no value = 1, which results in clearing row no.1 because this row was still selected for the autofilter.
I'd like to be able to check if there are any visible cells, before I proceed with the clearing of the selection.
I tried this:
If Selection.RowHeight <> 0 Then Range("J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
But this doesnt work, because row no.1 is still selected.
Can I use an If then statement to check If there are any visible cells, then clear these, if not, resume next.
View 3 Replies
View Related
Jun 19, 2014
Why auto filter does not show all the records in drop down menu ?
View 2 Replies
View Related
Jul 12, 2014
I am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
View 5 Replies
View Related
Mar 21, 2007
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
View 9 Replies
View Related
May 9, 2014
I would like to determine if the VisibleDrowndown is TRUE in the attached table.
The current macro sets it to FALSE in field 1. However, I want to identify when it is TRUE so I can run this macro.
Attached File : V1.xlsm
View 1 Replies
View Related
Jun 23, 2009
how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.
View 4 Replies
View Related
Jun 22, 2007
I need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
View 4 Replies
View Related
Mar 13, 2013
I have a strange problem I cannot solve in that I'm trying to create an auto filter that returns records based on a date variable.
If I set the code to equal the date variable, it returns information. If I set the code to return records AFTER the date, it returns nothing.
Code to return records on the date:
Dim startdate As Date
startdate = Format((Now), "dd/mm/yyyy")
ActiveSheet.Range("A:B").AutoFilter Field:=2, Criteria1:="=" & startdate
This returns data, however if I slightly amend it to get records on or after the date:
Code:
Dim startdate As Date
startdate = Format((Now), "dd/mm/yyyy")
ActiveSheet.Range("A:B").AutoFilter Field:=2, Criteria1:=">=" & startdate
It returns nothing. Is there a syntax problem in my code.
View 1 Replies
View Related
Jul 15, 2009
I attached a print srceen of the excel worksheet.
In E5 i want it to show the count of records that belong to group 1 (C5) with category 1 value="1"
In F5 i want it to show the count of records that belong to group 1 (C5) with category 2 value="2"
View 2 Replies
View Related
Jan 9, 2007
creating a formula to count the number of rows in a different worksheet if a cell has a value of "1" or "2" (these are the only two allowed values) AND a status of "'on track". also need to add values in other cells within the different worksheet if the value is "1" or "2" AND has a status of "on Track".
View 9 Replies
View Related
Aug 26, 2009
I need to count how many rows of records there are on the page labelled Data.
this is what i wrote...
=COUNT(Data!A3:A1995)
doesn't seem to be working correctly
View 2 Replies
View Related
Feb 6, 2014
there just want to ask about on how to count records using array attach here is my sample file.!
View 6 Replies
View Related
Nov 25, 2009
I run a work order report on a daily and weekly basis and I am looking for a formula that will find all dates in L:L that are greater than 9 days old. I can't seem to work out the syntax. The cells in L:L are formatted as DATE and TYPE *3/14/2001
View 5 Replies
View Related
May 23, 2013
I have over 60,000 rows of data. In one cell of each row is a "student ID". I need to determine how many times a given ID appears just once, how many times an ID shows up twice, three times etc.
View 6 Replies
View Related
Mar 22, 2007
I have a challenge when using autofilter.
In the attached file I have sales reps with sales numbers.
I found out from Ozgrid to use subtotal formule in C2 to sum only lines visible. Ozgrid, thx a lot for that input.
However, in cell C3 I want to count number of records, but when filtering sales rep "A", then formula "counta" still counts all records, i.e. 27.
What formula should I use to count only visible records, e.g. 7 records for sales rep "A"?
View 9 Replies
View Related
Oct 3, 2011
I have a spreadsheet with a lot of hidden rows in.
How can I do a count that only counts information in the visible cells?
View 9 Replies
View Related
Nov 27, 2012
Is there way to do this? I did not find it.
View 5 Replies
View Related
