I would like to determine if the VisibleDrowndown is TRUE in the attached table.
The current macro sets it to FALSE in field 1. However, I want to identify when it is TRUE so I can run this macro.
Attached File : V1.xlsm
WHEN I FILTER FOR WORDS BEGGINING WITH LETTER I. THERE IS NO DATA...SO I HAVE SOME CODE THAT WILL POP UP MSG BOX. AND IF THERE IS THEN COPY DESIGANTED RANGE..HOWEVEER WHEN I FILTER USING THE BELOW CODE...IT DOES NOT RECOGNIZE THAT THERE IS NOTHING AND JUST GOES THROUGH AS NORMAL..
Sub START()
Dim rng As Range
Dim rng2 As Range
Dim worksheet1 As Worksheet
Set worksheet1 = worksheets("MAIN")
Selection.AutoFilter Field:=4, Criteria1:="=I*", Operator:=xlAnd
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(0, 18).Resize(.Rows.Count - 1, 1)
.SpecialCells (xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else
worksheets("noms").Cells.Clear
Set rng = ActiveSheet.AutoFilter.Range
rng.Offset(1, 0).Resize(rng.Rows.Count - 1).Copy _
destination:=worksheets("NOMS").Range("A1")
End Sub
In my IE site there is a field which is a dropdown field with the value 'Not Known' and 'Specified Date'. If I select 'Specified Date' another field named 'Date' becomes visible where I can give a date. I was able to ensure that the value 'Specified Date' is selected using the following statement:
IE.document.GetElementById("startDateBasis").Value = "SpecifiedDate"I also was able to populate the date field with the statement:
IE.document.GetElementById("startDate").Value = SOA
Where SOA is populated with the date string I need to be given as input in IE.
My issue though is that, eventhough the data is provided by the macro the field 'Date' is not visible. So I have no way to know if the input was succesful until I submit the screen. I think I read somewhere that this is because of the way datebasis is populated.
How to get the field 'Date' made visible if datebasis is given as 'Specified Date'?
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
View 5 Replies View RelatedI recorded the following in a macro.
Sub Macro3()
'
' Macro3 Macro
' Macro recorded 8/16/2006 by BPETTIS
'
'
With ActiveSheet. PivotTables("PivotTable1").PivotFields("CT Comp")
.PivotItems("0.9").Visible = True
.PivotItems("1.3").Visible = True
.PivotItems("1.4").Visible = True
.PivotItems("1.5").Visible = True
.PivotItems("1.6").Visible = True
.PivotItems("1.7").Visible = True
.PivotItems("1.8").Visible = True
.PivotItems("1.9").Visible = True
.
It was recorded when in the indcated PivotField is selected the "ShowAll" option.
However, when I try to run this macro I get the following error
"Run-time error '1004':
Unable to set the Visible property of the PivotItem class
Why am I not able to execute a recorded macro. Also how do I set a Pivot Item's visiblity to "TRUE"
I have macro that will call another macro if a checkbox is true, how do I code it to ignore it and move to the next check box if it is false.
View 8 Replies View RelatedI want to return a true or false result that I can use in a formula to indicate whether "Edit directly in cell" has been "set". The VBA code is
Application.EditDirectlyInCell = True
I have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedI've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
View 2 Replies View RelatedI have worksheet that is used as entry log. In this log I have a month column that the month number is entered into based on the month of the entry. I have vba code that filter on this month column and copies the visible results to another worksheet for just the month that is filtered. The problem I am having is that if the month I am filtering on is not found it is pasting the information from the previous search. I am guessing there are two ways to solve this problem:
1. I need code that in the form of an ElseIf statement where the if the value of the autofilter's criteria isn't found then do something
2. I need code that clears the clipboard of copied data after it pastes the data so that when the first occurance of a value not being found occurs nothing is pasted.
I'm totally uncertain as to how either of these codes should be written.
I am trying to resize a picture on a worksheet to fit a dynamic measurement(the size of the page is different depending on the contents in cells).
I am doing this all in VBA.
so what I have come up with is that I need to
1) determine the total column width of only the non-hidden(visible) cells.
2) resize my picture to those measurements, so I can get an exact fit, and it doesn't create a new page break, by going over.
I have found some code on forums, and am thinking of something like this as a solution(although I don't know how to complete it):
For summing column widths:
I have a database that holds thousands of names and the columns are of trinings that they have completed. I can filter by the criteria of name and of ID. ID number is unique so what I want is to know if Column F has a date in it once filtered. It maybe line 789 but that is all it shows because the filter is on.
View 2 Replies View RelatedI am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
View 3 Replies View RelatedI'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test()
max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row
For datarow = 3 To max_x
If Worksheets("Data").Cells(datarow, 4) = "Wire" Then
Worksheets("Data").AutoFilterMode = False
[Code]....
I have a Userform that it makes possible to step through the the spreadsheet. It works with Previous and Next buttons. The Userform opens with a doubleclick. This works fine, but when I use an autofilter and the criteria reduces the number of rows, the Userform shows the hidden rows as well as the filtered rows. How could it be made that it only steps through the visible rows?
View 2 Replies View RelatedI have a Userform that allows you to step through the the spread sheet that works with Previous and Next buttons. This works fine.
When I use an autofilter where the criteria reduces the number of rows the Userform shows the hidden rows as well as the filtered rows. how can I make it just show the visible rows.
I have a spreadsheet with over 20000 rows of data and have used autofilter to find the information I want to check. Once I have these rows I want to check whether the cells in Column AE are higher/lower than the number (in this case '3'). Once it finds a cell that meets this condition then it copies and pastes the whole row so that I can review the entry.
The problem I'm having is that it doesn't work all the time. I've tested it a number of times in break mode & played it throughout and it works as expected, whereas other times it picks up the top row (header) and duplicates it or it picks up hidden rows and pastes them in sheet 2 if the condition is met. I want it to just pick up rows if they are visible (using the filter) if the condition is met.
Here's what I have so far:
Code:
Sub Lvl3v2()
'Level 3
Dim i As Integer
Dim r As Range
Dim c As Range
i = Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
[Code] .........
how to scroll through visible cells after I have autofiltered a list, the same way you do when you use the arrows on your keyboard. When I try the offset method, Excel selects the following row, regardless its visibility.
View 4 Replies View RelatedI have records entered in sheet 1 named "Data". The "Data " Sheet contains Model wise records with serial nos and having status as either ZERO or ONE. Zero indicated that the particular model is out of stock while One indicates it is in stock.
When I filter the data using Auto Filter for records having Status 1, a list of records are displayed. I want to create a summary report in sheet 2 wherein it displays the no of occurence of a particular Model.
What I have observed is that whenever I filter for Status 1 & within it for Model A, it displays "3 of 12 records found" in the status bar. Is it possible to capture that "3" from that message displayed. Or is there any way to count the occurence ?
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
Is there a simple way to count unhidden rows? I saw Counting number of unhidden rows =SUBTOTAL(103,D11:D7180) and, frankly, I'm wondering if there is a way to do it without a formula. I don't need the count in a cell, per se, just a quick count of the unhidden rows of a worksheet for usage elsewhere.
View 5 Replies View RelatedI'm working on a VB code where I use an autofilter. I want to clear a selection in a couple of columns, where the value in the autofilter = 1.
This is the
Dim lRow1 As Long
lRow1 = WorksheetFunction.Max( Range("A65536").End(xlUp).Row)
Rows("1:1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="1"
Range("F2:H" & lRow1,"J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
Sometimes there is no value = 1, which results in clearing row no.1 because this row was still selected for the autofilter.
I'd like to be able to check if there are any visible cells, before I proceed with the clearing of the selection.
I tried this:
If Selection.RowHeight <> 0 Then Range("J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select
Selection.ClearContents
But this doesnt work, because row no.1 is still selected.
Can I use an If then statement to check If there are any visible cells, then clear these, if not, resume next.
I am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
View 5 Replies View RelatedI have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
I've used VBA to make a picture appear when all the correct answers have been entered and it all works well. However, not to be too mean to 15 year olds, many of my students can be devious little feckers, and I want to hide and password protect the VBA code so that they can't just change the pictures visible section to true. I can password protect the workbook and worksheet, but not the VBA.
I'm entering the Visual Basic editor and I can see my simple script. I then click Tools - VBproject properties - protection. I'm clicking the "Lock Project for Viewing" box then filling in the password and confirming the password and clicking OK. But I can still see and edit my script, despite protecting the sheet and workbook.
How do I determine if AutoFilter is turned on when I open a sheet? I tried FilterMode with no luck.
HTML Code:
Sub macro2()
Dim t As Boolean
s = ActiveWorkbook.Name
t = Worksheets("SO_PO_14").FilterMode
End Sub
The FilterMode call always return False,
how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.
View 4 Replies View RelatedI need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
I have a text field at the bottom of a user form that remains hidden (i.e. visible = false) until the user clicks the "Ok" button. At that point, I want the text field to appear as the macro is running (it's a large macro, so the text field just says "processing, please wait...").
The first line of my macro is: