In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Is there a simple way to count unhidden rows? I saw Counting number of unhidden rows =SUBTOTAL(103,D11:D7180) and, frankly, I'm wondering if there is a way to do it without a formula. I don't need the count in a cell, per se, just a quick count of the unhidden rows of a worksheet for usage elsewhere.
I have tried and tried to get the VBA code working that will tell me the number of visible rows in an autofiltered set of data, but the result I seem to be getting is always "1". Below is the most simple form of the code that I am using (it is based on previous posts and tutorials on this site). (I have also attached a workbook with sample data and the code)
With ActiveSheet Set rnData = .UsedRange With rnData . AutoFilter Field:=1, Criteria1:="5" .Select 'demonstrate that the rnData range is valid lcount = .SpecialCells(xlCellTypeVisible).Rows.Count End With End With
I have records entered in sheet 1 named "Data". The "Data " Sheet contains Model wise records with serial nos and having status as either ZERO or ONE. Zero indicated that the particular model is out of stock while One indicates it is in stock.
When I filter the data using Auto Filter for records having Status 1, a list of records are displayed. I want to create a summary report in sheet 2 wherein it displays the no of occurence of a particular Model.
What I have observed is that whenever I filter for Status 1 & within it for Model A, it displays "3 of 12 records found" in the status bar. Is it possible to capture that "3" from that message displayed. Or is there any way to count the occurence ?
I have a Userform that it makes possible to step through the the spreadsheet. It works with Previous and Next buttons. The Userform opens with a doubleclick. This works fine, but when I use an autofilter and the criteria reduces the number of rows, the Userform shows the hidden rows as well as the filtered rows. How could it be made that it only steps through the visible rows?
I have a Userform that allows you to step through the the spread sheet that works with Previous and Next buttons. This works fine.
When I use an autofilter where the criteria reduces the number of rows the Userform shows the hidden rows as well as the filtered rows. how can I make it just show the visible rows.
I have a spreadsheet with over 20000 rows of data and have used autofilter to find the information I want to check. Once I have these rows I want to check whether the cells in Column AE are higher/lower than the number (in this case '3'). Once it finds a cell that meets this condition then it copies and pastes the whole row so that I can review the entry.
The problem I'm having is that it doesn't work all the time. I've tested it a number of times in break mode & played it throughout and it works as expected, whereas other times it picks up the top row (header) and duplicates it or it picks up hidden rows and pastes them in sheet 2 if the condition is met. I want it to just pick up rows if they are visible (using the filter) if the condition is met.
Here's what I have so far:
Code:
Sub Lvl3v2() 'Level 3 Dim i As Integer Dim r As Range Dim c As Range
i = Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
I am trying to display a certain number of visible rows, using AutoFilter. My idea is to use a helper column that will 'number' each visible row, but I'm not quite sure what functions to use for this.
If you look at the attached file in Row 41, Column H, the count function is not working properly... it is mis-counting, the numbers that appear. It does not work either in F41 and G41. It seems to be having a problem reading the if function I created. Does anyone know how to correct this, or change the if function formula so it doesn't have these issues.
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how? 2) With the count of rows, what am i doing wrong?
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product F1020 F1023 F1025 F1120 F1123 F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120 F1123 F1125
TO
F1020 F1023 F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
I've got an AUTOFILTER and would like to add only the visible cells in a particular column (column E). As the user changes the filter, the total would change - but I'm not sure where to even start with this one. I've attached a sample file.
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
I am going bonkers with the worksheet autofiltered result. On userform "Find" when I use one of two comboboxes to filter the results no data is displayed. Using the textbox on that form the filtered data is displayed.
I'm looking to do a check on every row after I set an autofilter. Here's a scrubbed version of what I have so far.
Sub test() max_x = Worksheets("Data").Range("B1048576").End(xlUp).Row For datarow = 3 To max_x If Worksheets("Data").Cells(datarow, 4) = "Wire" Then Worksheets("Data").AutoFilterMode = False
how to scroll through visible cells after I have autofiltered a list, the same way you do when you use the arrows on your keyboard. When I try the offset method, Excel selects the following row, regardless its visibility.
WHEN I FILTER FOR WORDS BEGGINING WITH LETTER I. THERE IS NO DATA...SO I HAVE SOME CODE THAT WILL POP UP MSG BOX. AND IF THERE IS THEN COPY DESIGANTED RANGE..HOWEVEER WHEN I FILTER USING THE BELOW CODE...IT DOES NOT RECOGNIZE THAT THERE IS NOTHING AND JUST GOES THROUGH AS NORMAL..
Sub START() Dim rng As Range Dim rng2 As Range Dim worksheet1 As Worksheet Set worksheet1 = worksheets("MAIN") Selection.AutoFilter Field:=4, Criteria1:="=I*", Operator:=xlAnd With ActiveSheet.AutoFilter.Range On Error Resume Next Set rng2 = .Offset(0, 18).Resize(.Rows.Count - 1, 1) .SpecialCells (xlCellTypeVisible) On Error Goto 0 End With If rng2 Is Nothing Then MsgBox "No data to copy" Else worksheets("noms").Cells.Clear Set rng = ActiveSheet.AutoFilter.Range rng.Offset(1, 0).Resize(rng.Rows.Count - 1).Copy _ destination:=worksheets("NOMS").Range("A1") End Sub
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
Sometimes there is no value = 1, which results in clearing row no.1 because this row was still selected for the autofilter. I'd like to be able to check if there are any visible cells, before I proceed with the clearing of the selection.
I tried this:
If Selection.RowHeight <> 0 Then Range("J2:J" & lRow1).SpecialCells(xlCellTypeVisible).Select Selection.ClearContents
But this doesnt work, because row no.1 is still selected.
Can I use an If then statement to check If there are any visible cells, then clear these, if not, resume next.
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.